Page 3 - GUI; FXS
Grandstream Networks, Inc. HT–496 User Manual Page 3 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 T ABLE OF F IGURES HT–496 User Manual F IGURE 1: C ONNECTING THE HT– 496 ............................................................................................................ 5 F IGURE 2: C ONFIG...
Page 4 - Welcome
Grandstream Networks, Inc. HT–496 User Manual Page 4 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Welcome Thank you for purchasing the Grandstream HT–496, the affordable, feature rich Analog Telephone Adaptor designed for both the residential and business user. HandyTone-496 is a next generation dua...
Page 5 - Installation; QUIPMENT; ATA; HT–
Grandstream Networks, Inc. HT–496 User Manual Page 5 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Installation E QUIPMENT P ACKAGING The HT–496 ATA package contains: • One HT–496 Main Case • One Universal Power Adaptor • One Ethernet Cable C ONNECTING Y OUR ATA The HT–496 is easy to configure. The H...
Page 6 - products and void the manufacturer warranty.; WAN
Grandstream Networks, Inc. HT–496 User Manual Page 6 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 F IVE EASY STEPS TO INSTALL THE HT–496 1. Connect a standard touch-tone analog telephone (or fax machine) to first FXS port. 2. Connect another standard touch-tone analog telephone (or fax machine) to s...
Page 7 - Product Overview; EY; : HT–496 Technical Specifications
Grandstream Networks, Inc. HT–496 User Manual Page 7 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Product Overview HandyTone-496 is a next generation dual-port SIP IAD for Internet data, voice, and fax. K EY F EATURES Ethernet Ports DHCP FXS Port PSTN Pass – through Voice Mail Indicator Voice Codec ...
Page 8 - : HT–496 Hardware Specifications; x FXS
Grandstream Networks, Inc. HT–496 User Manual Page 8 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 T ABLE 3: HT–496 Hardware Specifications LAN Interface 1 x RJ45 10 Mbps WAN Interface 1 x RJ45 10 Mbps FXS phone port 2 x FXS Button 1 LED Green and red / solid state & blinking state Universal Swit...
Page 9 - Basic Operations; ET; : HT–496 IVR Menu Definitions; Static IP Mode
Grandstream Networks, Inc. HT–496 User Manual Page 9 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Basic Operations G ET F AMILIAR WITH V OICE P ROMPT HT–496 stores a voice prompt menu (Interactive Voice Response or IVR ) for quick browsing and simple configuration. The IVR menu and the LED button wo...
Page 10 - Make a Direct IP Call; or; Restoring Factory Settings
Grandstream Networks, Inc. HT–496 User Manual Page 10 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 - never upgrade 47 “Direct IP Calling” Enter a 12 digit IP address to make a direct IP call, after dial tone. (See “ Make a Direct IP Call ”.) 99 “RESET” Press “ 9 ” to reboot the device; or Enter enco...
Page 11 - IP; a) Both VoIP devices use a public IP address or; button; The HT–496 supports both
Grandstream Networks, Inc. HT–496 User Manual Page 11 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 P LACING A P HONE C ALL P HONE OR E XTENSION N UMBERS 1. Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or 2. Dial the number directly and press # (Use # as dial key”...
Page 12 - Enable Call Feature; Yes; Star Code Style 3-way Conference; Use Bellcore Style 3-way Conference
Grandstream Networks, Inc. HT–496 User Manual Page 12 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Expected outcomes: a) A quick confirmation tone (call waiting tone) followed by a dial tone. This indicates the transfer is successful. Hang up or place another call. b) A quick busy tone followed by a...
Page 13 - Call Features; : HT–496 Call Feature Definitions; To cancel “Unconditional Call
Grandstream Networks, Inc. HT–496 User Manual Page 13 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Call Features The HT–496 supports all the traditional and advanced telephony features. T ABLE 5: HT–496 Call Feature Definitions Key Call Features *23 3-way conference *30 Block Caller ID (for all subs...
Page 14 - LED; : HT–496 LED Definitions
Grandstream Networks, Inc. HT–496 User Manual Page 14 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 LED L IGHT P ATTERN I NDICATION Following tables show the LED light pattern indication. The LED shows PHONE1 status only. T ABLE 6: HT–496 LED Definitions RED LED indicates not normal status Button fla...
Page 15 - Configuration Guide; Select voice menu option 01 to enable HT–496 to use DHCP.
Grandstream Networks, Inc. HT–496 User Manual Page 15 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Configuration Guide C ONFIGURING HT–496 THROUGH V OICE P ROMPT DHCP M ODE Select voice menu option 01 to enable HT–496 to use DHCP. STATIC IP M ODE Select voice menu option 01 to enable HT–496 to use S...
Page 16 - ND
Grandstream Networks, Inc. HT–496 User Manual Page 16 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 F ROM THE WAN PORT : The WAN port HTML configuration option is disabled by default from factory. To access the HTML configuration menu from the WAN port: 1. Enable the “WAN Port Web Access” option via ...
Page 17 - : HT–496 Basic Configuration Settings Definitions; Using the PPPoE feature
Grandstream Networks, Inc. HT–496 User Manual Page 17 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 T ABLE 7: HT–496 Basic Configuration Settings Definitions End User Password Password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters. Web Port ...
Page 18 - Device Mode; Enables use of the device as a router or a bridge.
Grandstream Networks, Inc. HT–496 User Manual Page 18 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Daylight Savings Time Controls whether displayed time is daylight savings time or not. If set to “Yes” and the Optional Rule is empty, then the displayed time will be 1 hour ahead of normal time. • The...
Page 19 - Set a specific MAC address. Set in; : HT–496 Device Status Page Definitions; The device ID in HEX format. This is needed for ISP troubleshooting.
Grandstream Networks, Inc. HT–496 User Manual Page 19 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Cloned WAN MAC Address: Set a specific MAC address. Set in Hex format. LAN Subnet Mask Sets the LAN subnet mask. Default value is 255.255.255.0. LAN DHCP Base IP: Base IP for the LAN port that function...
Page 21 - : HT–496 Advanced Configuration Page Definitions; at Boot up
Grandstream Networks, Inc. HT–496 User Manual Page 21 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 T ABLE 9: HT–496 Advanced Configuration Page Definitions Admin Password This contains the password to access the Advanced Web Configuration page. This field is case sensitive. Home NPA Local area code ...
Page 22 - Caller ID Scheme; Select the Caller ID Scheme to suit the standard of different area.; Polarity Reversal; Example
Grandstream Networks, Inc. HT–496 User Manual Page 22 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Caller ID Scheme Select the Caller ID Scheme to suit the standard of different area. • Bellcore (North America) • CID-Canada • DTMF-Brazil • DTMF-Sweden • DTMF (Denmark) • ETSI-DTMF (Finland, Sweden) •...
Page 23 - 0: HT–496 Individual Account Settings Definitions; SIP service subscriber’s account password.
Grandstream Networks, Inc. HT–496 User Manual Page 23 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 T ABLE 10: HT–496 Individual Account Settings Definitions SIP Server This field contains the URI string or the IP address (and port, if different from 5060) of the SIP proxy server. e.g., the following...
Page 27 - Software Configuration; IRMWARE; IVR; Firmware Server Path; TFTP; . Each product has a unique TFTP server address.
Grandstream Networks, Inc. HT–496 User Manual Page 27 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Software Configuration Software upgrades are completed via TFTP or HTTP. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page. F IRMWARE U PGRADE THROUGH TFTP/HTTP T...
Page 29 - Restore Factory Default Setting; Directions for Restoration:; move the cursor or wait for 4 seconds to continue to key in another “2”.
Grandstream Networks, Inc. HT–496 User Manual Page 29 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Restore Factory Default Setting WARNING: Restoring the Factory Default Setting will delete all configuration information of the phone. Please backup or print all the settings before you restoring facto...
Page 30 - Glossary of Terms; ADSL; Domain Name System
Grandstream Networks, Inc. HT–496 User Manual Page 30 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 Glossary of Terms ADSL Asymmetric Digital Subscriber Line: Modems attached to twisted pair copper wiring that transmit from 1.5 Mbps to 9 Mbps downstream (to the subscriber) and from 16 kbps to 800 kbp...
Page 31 - FQDN; Dynamic Host Configuration Protocol; two types
Grandstream Networks, Inc. HT–496 User Manual Page 31 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 FQDN Fully Qualified Domain Name. A FQDN consists of a host and domain name, including top-level domain. For example, www.grandstream.com is a fully qualified domain name. www is the host, Grandstream ...
Page 32 - connections
Grandstream Networks, Inc. HT–496 User Manual Page 32 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 MTU A Maximum Transmission Unit (MTU) is the largest size packet or frame , specified in octet s (eight- bit bytes), that can be sent in a packet- or frame-based network such as the Internet. The maxim...
Page 33 - UDP; User Datagram Protocol (UDP) is one of the core protocols of the
Grandstream Networks, Inc. HT–496 User Manual Page 33 of 33 Firmware 1.0.3.64 Last Updated: 1/2007 UDP User Datagram Protocol (UDP) is one of the core protocols of the Internet protocol suite . Using UDP, programs on networked computers can send short messages known as datagrams to one another. UDP ...
