Page 2 - Index
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 2 of 52 DP715/DP710 USER MANUAL Index GNU GPL INFORMATION ......................................................................... 5 CHANGE LOG ........................................................................................... 6 C HANG...
Page 4 - GUI
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 4 of 52 T ABLE OF F IGURES DP715/DP710 U SER M ANUAL Figure 1: CONNECTING THE DP715 BASE STATION .................................................................. 9 Figure 2: CONNECTING THE DP710 CHARGER UNIT ......................................
Page 6 - CHANGE LOG; MWI LED BlinkingUpdate Handset Time
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 6 of 52 CHANGE LOG This section documents significant changes from previous versions of DP71x user manuals. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. CHAN...
Page 7 - WELCOME; field proven for flexible deployment.; SAFETY COMPLIANCES
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 7 of 52 WELCOME Thank you for purchasing Grandstream’s DP715/710DECT Cordless IP Phone. The DP715/710 is the next generation of powerful, affordable, high quality and simple to configure DECT Cordless IPPhone for small business and residential u...
Page 9 - Table 1: EQUIPMENT PACKAGING; CONNECTING THE DP715 BASE STATION
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 9 of 52 CONNECT YOUR DP715/710 EQUIPMENT PACKAGING Table 1: EQUIPMENT PACKAGING DP715 DP710 1Base unit 1 Handset including 2 rechargeable batteries (AAA, 1.2V / 500 mAh, NiMH) 1 power supply plug for the base unit 1 Ethernet cable 1 Us...
Page 10 - Table 2: DEFINITIONS OF THE DP715 CONNECTORS; Power adapter connection.; RESET; LEDs; Table 4: ADVANCED DEFINITIONS OF THE DP715 LEDS PATTERN; Condition
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 10 of 52 Table 2: DEFINITIONS OF THE DP715 CONNECTORS DC 6V Power adapter connection. NETWORK PORT (RJ-45) 10/100Mbps RJ-45 port toconnect to the network. RESET Factory Reset button: Press for 7 seconds to reset factory default settings. Table 3...
Page 11 - CONNECTING THEDP710 CHARGER UNIT
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 11 of 52 CONNECTING THEDP710 CHARGER UNIT To setup the DP710, follow the steps below: Plug the 7V DC power adapter into an electrical outlet to start using the charger unit. Figure 2: CONNECTING THE DP710 CHARGER UNIT SETTING UP THE DP715/710 HA...
Page 12 - SOFTWARE FEATURES OVERVIEW
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 12 of 52 PRODUCT OVERVIEW The DP715/710 is the next generation of powerful, affordable, high quality and simple to configure DECT Cordless IP Phone for small business and residential users. Their compact size, superb voice quality, rich feature ...
Page 14 - Table 7: HANDSET KEYPAD; Hands free key
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 14 of 52 USING THE DP715/710 HANDSET GETTING FAMILIAR WITH THE HANDSET The DP715/710 Handset has a dynamic screen. The screen displays differently depending on whether the handset is idle or in use (active screen). HANDSET KEYS DESCRIPTION 1. Di...
Page 16 - BATTERY DISPLAY; The batteries are fully charged.; Handsfree Speaker ON.; Icon Line
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 16 of 52 HANDSET DISPLAY STRUCTURE (LCD) Figure 5: HANDSET DISPLAY STRUCTURE BATTERY DISPLAY • The batteries are fully charged. • The batteries are 75% charged. • The batteries are half charged (50%). • The batteries are only 25% charged. • The ...
Page 17 - ON when the keypad is locked.; Solid; when it’s within the base unit coverage range.; Flashing; when; You can press the
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 17 of 52 Keypad Locked: ON when the keypad is locked. Range Icon : Solid when it’s within the base unit coverage range. Flashing when it’s out of the base unit coverage range (The handset will display “Searching”). HANDSET MENU STRUCTURE The...
Page 18 - The Handset support up to 18 different ring tones.
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 18 of 52 HANDSET MENU OVERVIEW Display Definition Phonebook Displays the contact entries Handset Ring Tone Internal : Allows you to specify the ring tone for internal calls. External : Allows you to specify the ring tone for external calls...
Page 19 - TURNING THE HANDSET ON/OFF; ’s present in the phonebook or in the SIP Invite.
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 19 of 52 Set Time Format 12Hour : Time will be displayed in 12 Hours format i.e. 3:00pm 24Hour : Time will be displayed in 24 Hours format i.e. 15:53 Tools Appointement: Allows you to set up reminders. Stop Watch: Allows you to measure...
Page 20 - THE PHONEBOOK
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 20 of 52 Deleting a Call 1. Press to access the calls list. 2. Use or to search for the number you need. 3. Press Option Softkey. 4. Press or repeatedly, select Delete . 5. Press to confirm. 6. The call is deleted and the next call appears on th...
Page 22 - SELECTING THE MENU LANGUAGE; Handset; SETTING THE LOUDSPEAKER VOLUME; The volume is adjusted in the same way in handsfree mode.; MUTING THE MICROPHONE; Off
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 22 of 52 SELECTING THE MENU LANGUAGE The Handset has a number of menu languages, see software overview features. Proceed as follows to set the language: 1. Press . 2. Scroll withand to Handset and pressto confirm. 3. Scroll withand to Language a...
Page 23 - SETTING THE RINGER MELODY ON THE HANDSET
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 23 of 52 SETTING THE RINGER VOLUME ON THE HANDSET You can adjust the ringer volume for an incoming call (internal or external) to one of 6 levels (level 1 to 5 and Off ). If you select Off , the icon appears in the display. The handset will not ...
Page 24 - ADJUST THE DISPLAY CONTRAST
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 24 of 52 SETTING THE KEY LOCK You can lock the keypad against unintentional entries. It is, however, still possible to pick up incoming calls even with the keypad locked. Enable the Keypad Lock: 1. Press and hold for approximately 2 seconds. 2. ...
Page 25 - EDIT HANDSET NAME
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 25 of 52 EDIT HANDSET NAME The procedure for changing the name of your handset shown in the display in standby mode is as follows: 1. Press . 2. Press or repeatedly, select Handset . 3. Press to confirm. 4. Press or repeatedly, select Handset Na...
Page 26 - STOP WATCH
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 26 of 52 APPOINTMENTS You can set five appointments or reminders to which you can assign a name and an alarm by date and time. 1. Press . 2. Press or repeatedly, select Tools . 3. The Appointment menu item is already highlighted. Press . 4. Scro...
Page 27 - Pick up the handset and dial “; Static IP Mode; You need to; Make a Direct IP Call; Restore Factory Default Setting
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 27 of 52 BASIC OPERATIONS UNDERSTANDING DP715/710 VOICE PROMPT DP715 Base Station has a built-in voice prompt menu for simple device configuration. The IVR menu work with any Handset registered to the base. Pick up the handset and dial “ *** ” t...
Page 28 - “Device not registered”; Five Success Tips when using the Voice Prompt; “*” shifts down to the next menu option; REGISTERING A HANDSET TO THE DP715 BASE STATION; Registration; and press .; Restart base; appears in the display.
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 28 of 52 “Device not registered” This prompt will be played immediately after off hook If the device is not register and the option “Outgoing Call without Registration” is in NO Five Success Tips when using the Voice Prompt 1. “*” shifts down to...
Page 29 - C.Using the Phonebook; ANSWERING CALLS
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 29 of 52 If you want to register ahandset to a new base, it has to be first de-registered from the existing base by selecting "desubscribe handset " option under the Handsets tab on the web GUI and then repeat the above steps. COMPLETING...
Page 30 - INTERNAL CALLS; INT; DIRECT IP CALLS; Elements necessary to complete a Direct IP Call:
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 30 of 52 b. Pick up the handset from the base or charger unit (Only if Auto Talk option is activated). To finish the call, press or place the handset in the base or the charger unit. Note: - You can switch off the ringer temporarily by pressing ...
Page 31 - Using Star Code; NO dial tone will be played between step 1 and 2.; CALL HOLD; Blind Transfer; RECALL; Enable Call Feature” must be set to “Yes” in web configuration page.
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 31 of 52 Using Star Code 1. Pick up the Handset and press then dial “ *47 ” 2. Enter the target IP address. Note: NO dial tone will be played between step 1 and 2. Examples of Direct IP Calls: a) If the target IP address is 192.168.0.160, the di...
Page 33 - Key
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 33 of 52 CALL FEATURES The DP715/710 supports all the traditional and advanced telephony features. Table 10: DP715/710 CALL FEATURE DEFINITIONS Key Call Features *02 Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *0272...
Page 34 - CONFIGURING THE BASE STATION THROUGH VOICE PROMPTS; DHCP; CONFIGURING THE BASE STATION VIA WEB BROWSER; Access the Web Configuration Menu
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 34 of 52 DP715 BASE STATION - CONFIGURATION GUIDE CONFIGURING THE BASE STATION THROUGH VOICE PROMPTS DHCP M ODE Select voice menu option 01 to enable DP715 to use DHCP. STATIC IP M ODE Select voice menu option 01 to enable DP715 to use STATIC IP...
Page 35 - IMPORTANT SETTINGS; NAT Settings; If you plan to keep the DP715 Base Station within a; STUN Server; DTMF Settings are in ProfileX page.
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 35 of 52 The password is case sensitive with maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only an administrator can access the “ADVANCED SETTINGS”, “HANDSET SETTI...
Page 36 - Table 11: BASIC SETTINGS; Using the PPPoE feature
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 36 of 52 G726-32 Table 11: BASIC SETTINGS End User Password Password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters. Web Port By default, HTTP uses port 80. This field is for customiza...
Page 37 - Table 12:STATUS PAGE; This number is always used for firmware
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 37 of 52 Allow DHCP server to set Time Zone Default No. Let the DHCP server handle the Time Zone Language Languages supported with voice prompt and web interface, except Spanish that it is only in IVR. Reset Type • Full Reset : This will make a ...
Page 38 - ADVANCED USER CONFIGURATION; admin; Table 13:ADVANCED SETTINGS
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 38 of 52 Handset Status Displays relevant information regarding the Handset status. Handset Hook SIP Registration DND Forward Busy Forward Delayed Forward Handset 1 On Hook Registered Yes 613 • Handset 1 is registered with SIP Server. • Handset ...
Page 41 - Example; controls time sync call behavior.; Table 14: PROFILE SETTINGS
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 41 of 52 Syslog Server The IP address or URL of System log server. This feature is especially useful for the ITSP (Internet Telephone Service Provider) Syslog Level Select the DP715 to report the log level. Default is NONE. The level is one of D...
Page 42 - with no specified STUN server
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 42 of 52 If activated (by choosing “Yes”) and a STUN server is also specified, then the DP715 performs according to the STUN client specification. Using this mode, the embedded STUN client will detect if and what type of firewall/NAT. If the det...
Page 44 - Disable Reminder Ring; Default is
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 44 of 52 to “Yes”, “#” will send the number. In this case, this key is essentially equivalent to the “Dial” key. If set to “No”, this “#” key can be included as part of number. Dial Plan Dial Plan Rules: 1. Accepted Digits: 1,2,3,4,5,6,7,8,9,0 ,...
Page 46 - Table 15: HANDSETS SETTINGS
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 46 of 52 first vocoder in the above vocoder Preference List or the actual used payload type negotiated between the 2 conversation parties at run time. Default is 2, up to 10/20/32/64 for G711/G726/G723/other codecs respectively) Symmetric RTP De...
Page 48 - FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS; Note
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 48 of 52 SOFTWARE UPGRADE Software upgrade can be done via either TFTP or HTTP or HTTPS. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page. FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS To upgrade via TFTP or HT...
Page 51 - BASE STATION; Reset Button; For example; Full Reset
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 51 of 52 RESTORE FACTORY DEFAULT SETTING WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will ...
Page 52 - VOIP Data; HANDSET
Firmware version 1.0.0.23 DP715/DP710 User Manual Page 52 of 52 VOIP Data : This will reset only the data related with a service provider like SIP server, sip user ID, provisioning and others. Note: 1. Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”. 2. If the DP715 was ...
