Page 3 - RESTORE FACTORY DEFAULT SETTING
3 6.1 U PGRADE THROUGH HTTP - 44 - 6.2 U PGRADE THROUGH TFTP - 44 - 7 RESTORE FACTORY DEFAULT SETTING - 46 – APPENDIX I GLOSSARY OF TERMS - 47 –
Page 4 - Welcome
4 1 Welcome Thank you for purchasing Grandstream BudgeTone-200 IP Phone. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's BudgeTone-200 SIP IP phone is the innovative IP telephone that offers a rich set of functionality and superb sound quality. They are fu...
Page 5 - Installation; One BudgeTone -200 Main Case; Connecting Your Phone; PC Port
5 2 Installation 2.1 What is Included in the Package The BudgeTone-200 phone package contains: 1. One BudgeTone -200 Main Case 2. One Handset 3. One Phone Cord 4. One Universal Power Adapter 5. One Ethernet Cord 2.2 Connecting Your Phone Following is a backside picture of BudgeTone-200, each connect...
Page 6 - Safety Compliances
6 The table below describes the connectors on the BudgeTone-200 phone: LAN 10/100 Switch LAN port for connecting to Ethernet. PC 10/100 Switch port for connecting PC POWER 5V power port HEADSET 2.5mm Headset port 2.3 Safety Compliances The BudgeTone-200 phone is compliant with various safety standar...
Page 8 - Product Overview; Front View
8 3 Product Overview The following photo illustrates the appearance of a BudgeTone-200 IP phone. Front View Side View
Page 9 - Key Features
9 3.1 Key Features Grandstream BudgeTone-200 IP Phone is a next generation IP telephone based on industry open standard SIP (Session Initiation Protocol). Built on innovative technology, Grandstream IP Phone features market leading superb sound quality and rich functionalities at mass-affordable pri...
Page 11 - Hardware Specification; UL
11 3.2 Hardware Specification The table below describes the hardware specification of BudgeTone-200: Model BudgeTone-200 LAN interface 2xRJ45 10/100Base-T Headset Jack 2.5mm Headset port LED 1 LED in RED color Phone Case 25-button keypad 12-digit caller ID LCD Universal Switching Power Adaptor Input...
Page 12 - Using BudgeTone-200 IP Phone; PM; 下午; AM; 上午; Icon; Network Status Icon:
12 4 Using BudgeTone-200 IP Phone 4.1 Getting Familiar with LCD / LED BudgeTone-200 phone has a numeric LCD of 64mmx24mm size with backlight. This model has a small red LED status reminder. Here is the display when all segments illuminate: PM 下午 010 AM 上午 When the phone is in the normal idle state, ...
Page 14 - Getting Familiar with Keypad
14 4.2 Getting Familiar with Keypad Called Numbers Menu Button LCD Red LED Message Hold Mute/Delete Send/Dial Speakerphone Flash Conference Transfer Up/Down Keys Callers
Page 16 - SPEAKERPHONE; Enter hands-free mode; Making and Answering Phone Calls; Handset, Speakerphone and Headset Mode; Press the SEND button directly to redial the number last called.
16 SEND/(RE)DIAL Dial a new number inputted or Redial the number last dialed. After entering the phone number, pressing this key would force a call to go out immediately before timeout SPEAKERPHONE Enter hands-free mode 4.3 Making and Answering Phone Calls 4.3.1 Handset, Speakerphone and Headset Mod...
Page 17 - Make Calls using IP Address; “MENU”; Answer an Incoming Call; Pick up the handset to answer the call normally using handset, or
17 number such as 6265556789, most likely you just follow the rule to dial 16266667890 as if you were calling from a regular analog phone, followed by pressing the “SEND” button. 4.3.3 Make Calls using IP Address Direct IP calling allows two parties, that is, a BudgeTone phone and another VoIP Devic...
Page 18 - he will hear a; Call Transfer; Blind Transfer; in order to make the features to work.
18 4.3.5 Handset Mode, Speakerphone/Headset Mode Handset mode and Speakerphone/Headset mode cannot be enabled at the same time. Pressing the hook-switch or Speakerphone button would toggle the phone between these two modes. 4.3.6 Call Hold While in conversation, pressing the “Hold” button will put t...
Page 19 - Attended Transfer; Conference Call; A presses the “CONFERENCE” button to get a dial tone and put B on hold; Checking Message and Message Waiting Indication
19 server and the phone will try to recover the call. The busy tone is just to indicate to the transferor that the transfer has failed. • Busy tone keeps playing. This means the phone has failed to receive the final response and decide to time out. Be advised that this does not indicate the transfer...
Page 20 - Mute and Delete; Call Features
20 The MWI (Message Waiting Indicator) LED will flash in red color in three quarters of a second when voicemail server sends message waiting information to BudgeTone-200. 4.3.11 Mute and Delete When in conversation with an ACTIVE LINE, pressing “MUTE/DEL” will mute the conversation, that is, you can...
Page 21 - Configuration Guide; Configuration with Keypad; Menu Item
21 5 Configuration Guide 5.1 Configuration with Keypad When the phone is IDLE or On Hook, press the MENU button to enter key pad menu state. When the phone goes off-hook or a call comes in, the phone automatically exits the key pad menu state and prepare for the call. It also exits the key pad menu ...
Page 23 - ring 0; MENU; CAREFUL
23 Menu Item Menu Functions 10 Display “[ 10] Phy Addr ” Press MENU to display the physical / MAC address Press ‘ ↓ ’ or ’ ↑ ’ to exit 11 Display “[11] ring 0 ” Press MENU to hear the selected ring tone, press ‘ ↓ ’ or ’ ↑ ’ to select the stored ring tones. Now only 3 are available, ring 0 (default)...
Page 24 - Configuration with Web Browser; Access the Web Configuration Menu; where the; IP Address; End User Configuration; Grandstream Device Configuration
24 5.2 Configuration with Web Browser BudgeTone 200 series IP phone has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow a user to configure the IP phone through a Web browser such as Microsoft’s IE. 5.2.1 Access the Web Configuration Men...
Page 27 - There are two modes under which the BudgeTone 200 can operate:
27 Update All Rights Reserved Grandstream Networks, Inc. 2004, 2005 End User Password This contains the password to access the Web Configuration Menu. This field is case sensitive with a maximum length of 25 characters. IP Address There are two modes under which the BudgeTone 200 can operate: • If D...
Page 28 - Allow the user to set a specific MAC address. Set in Hex format.; disabled
28 Cloned WAN MAC Addr Allow the user to set a specific MAC address. Set in Hex format. LAN Subnet Mask Sets the LAN subnet mask. Default value is 255.255.255.0 LAN DHCP Base IP Base IP for the LAN port, which function as a Gateway for the subnet. Default value is 192.168.2.1. DHCP IP Lease Time Val...
Page 29 - Advanced User Configuration
29 MAC Address The device ID, in HEX format. This is a very important ID for ISP troubleshooting. IP Address This field shows LAN IP address of BudgeTone 200 Product Model This field contains the product model info. Software Version • Program: This is the main software release, its number is always ...
Page 32 - Default is 4 seconds.
32 Admin Password Administrator password. Only administrator can configure the “Advanced Settings” page. Password field is purposely left blank for security reason after clicking update and saved. The maximum password length is 25 characters. Silence Suppression This controls the silence suppression...
Page 33 - IP address or Domain name of the STUN server.; Allow DHCP
33 Local RTP port This parameter defines the local RTP-RTCP port pair the BudgeTone 200 will listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will use this port _value for RTP and the port_value+1 for its RTCP; channel 1 will use port_value+2 for RTP and port_va...
Page 34 - This parameter sets the payload type for DTMF using RFC2833.; Syslog Server; sent or received SIP message (DEBUG level); NTP server
34 Automatic Upgrade Choose Yes to enable automatic upgrade and provisioning. In “Check for new firmware every” field, enter the number of days to enable BudgeTone 200 to check the server for firmware upgrade or configuration in the defined period of days. When set to No, BudgeTone 200 will only do ...
Page 36 - SIP; User ID is phone number:
36 Following is the screenshot of the Account Configuration Page:- Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTINGS ACCOUNT Account Active: No Yes Account Name: MyCompany (e.g., MyCompany) SIP Server: sip.mycompany. com (e.g., sip.mycompany.com, or IP address) Outbound Proxy:...
Page 38 - Individual Account Settings; A name to identify an account which will be displayed in LCD.
38 Turn off speaker on remote disconnect: No Yes Preferred Vocoder: (in listed order) choice 1: PCMU choice 2: PCMA choice 3: G.729A/B choice 4: G.723. 1 choice 5: GSM choice 6: PCMU choice 7: PCMA choice 8: G.729A/B Special Feature: Standard Update All Rights Reserved Grandstream Networks, Inc. 200...
Page 41 - There are 4 different ring tone that are defined:; Auto Answer
41 UAS Specify Refresher As a Callee, select UAC to use caller or proxy server as the refresher, or UAS to use the phone as the refresher. Force INVITE Session Timer can be refreshed using INVITE method or UPDATE method. Select “Yes” to use INVITE method to refresh the session timer. Enable 100rel T...
Page 42 - Your configuration changes have been saved.; Rebooting the Phone from Remote; You may relogin by clicking on the link below in 30 seconds.
42 5.2.4 Saving the Configuration Changes Once a change is made, the user should press the “Update” button in the Configuration Menu. The IP phone will then display the following screen to confirm that the changes have been saved: Grandstream Device Configuration STATUS BASIC SETTINGS ADVANCED SETTI...
Page 43 - Configuration through Central Provisioning Server
43 5.3 Configuration through Central Provisioning Server Grandstream BudgeTone 200 can be automatically configured from a central provisioning system. When BudgeTone 200 boots up, it will send TFTP or HTTP request to download configuration files, there are two configuration files, one is “cfg.txt” a...
Page 44 - Firmware Upgrade; Upgrade through HTTP; user needs
44 6 Firmware Upgrade 6.1 Upgrade through HTTP To upgrade software, BudgeTone 200 can be configured with an HTTP server where the new code image file is located. For example, following URL in the HTTP Upgrade Server: http://firmware.mycompany.com:6688/Grandstream/1.0.1.12 Where firmware.mycompany.co...
Page 46 - Restore Factory Default Setting
46 7 Restore Factory Default Setting Warning !!! Restore the Factory Default Setting will DELETE all configuration information of the device. Please backup or print out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameter...
Page 47 - Appendix I Glossary of Terms; Address Resolution Protocol is a protocol used by the; CODEC
47 8 Appendix I Glossary of Terms ADSL Asymmetric Digital Subscriber Line: Modems attached to twisted pair copper wiring that transmit from 1.5 Mbps to 9 Mbps downstream (to the subscriber) and from 16 kbps to 800 kbps upstream, depending on line distance. AGC Automatic Gain Control, is an electroni...
Page 51 - Network Time Protocol; VoIP
51 NAT Network Address Translation NTP Network Time Protocol , a protocol to exchange and synchronize time over networks The port used is UDP 123 Grandstream products using NTP to get time from Internet OBP/SBC Outbound Proxy or another name Session Border Controller. A device used in VoIP networks....
Page 52 - IETF; TCP
52 Real-time Transport Protocol defines a standardized packet format for delivering audio and video over the Internet. It was developed by the Audio-Video Transport Working Group of the IETF and first published in 1996 as RFC 1889 SDP Session Description Protocol, is a format for describing streamin...
Page 53 - speech processing; wherein, the presence or absence of human speech is
53 Voice Activity Detection or Voice Activity Detector is an algorithm used in speech processing wherein, the presence or absence of human speech is detected from the audio samples. VLAN A virtual LAN, known as a VLAN, is a logically-independent network. Several VLANs can co-exist on a single physic...
