Page 2 - MasterVoIP; VoIP to GSM Gateway; Usage Warnings; accordance with all; Trademark and Patents; All trademarks, patents and copyrights apply; General Manual Notes; incorporate
MasterVoIP VoIP to GSM Gateway Usage Warnings 1) High voltage transients, surges, and other power irregularities can cause extensive damage. It is the user's responsibility to provide a power protection system. 2) It is the user's responsibility to install, operate, and maintain the system in accord...
Page 4 - Febr uaray-2006 Page 4 / 42; VoIP t o GSM G ateway; TABLE OF CONTENTS
Febr uaray-2006 Page 4 / 42 MasterVoIP VoIP t o GSM G ateway TABLE OF CONTENTS 1 Getting Started ................................................................................................................................................. 5 2 Check your package Items ...............................
Page 5 - Febr uaray-2006 Page 5 / 42; Getting Started
Febr uaray-2006 Page 5 / 42 MasterVoIP VoIP t o GSM G ateway 1 Getting Started Eurotech Comm unication team is glad you have chosen to use the Eurotech ’ s VoIPMaster GSM to VoIP gateway for greatly saving your call costs. We will do our best to make your installation efforts as well as day-to-day c...
Page 6 - VoIPMaster
MasterVoIP VoIP to GSM Gateway Completing this you shall start the installation procedure of the VoIPMaster following the Set-up and Installation as follows: Installing the Manager Application Define the Com port Connection – to enable a PC to VoIP master proper connection Port and SIM Sett...
Page 7 - Febr uaray-2006 Page 7 / 42; Check your package Items
Febr uaray-2006 Page 7 / 42 MasterVoIP VoIP t o GSM G ateway 2 Check your package Items Please verify your package contains the following components (some were ordered specific) before installation: Main Hardware Device – The VoIP Master Gateway 110/220V Elec tric Power converter to 24V with cab...
Page 8 - VoIP Client ATA; Product Overview; loss concealment technology
Febr uaray-2006 Page 8 / 42 MasterVoIP VoIP t o GSM G ateway 3 VoIP Client ATA Bef ore using this device please perform the f ollowing acti ons: 1. Connect the VoIPMaster ( Which include the VoIP Client ATA as a built-in module) to the IP network v ia the RJ-45 connec tion near the 2 LEDs and power ...
Page 9 - Febr uaray-2006 Page 9 / 42; Model
Febr uaray-2006 Page 9 / 42 MasterVoIP VoIP t o GSM G ateway Compact, lightweight Universal Power adapter 3.1.2 Hardware Specification The following table describes the hardware specification of VoIP Client ATA Model VoIP Client (ATA) LAN interface 1xRJ45 10Base-T Button 1 LED GREEN & RED colo...
Page 11 - Febr uaray-2006 Page 11 / 42
Febr uaray-2006 Page 11 / 42 MasterVoIP VoIP t o GSM G ateway 3.1.4 Placing Phone Calls 3.1.4.1 Calling phone or extension numbers There are currently two methods to make an extension number call: 1. Dial the extension number directly and wait for 4 seconds. (Default “ No Key Entry Timeout ” ). Or: ...
Page 12 - Febr uaray-2006 Page 12 / 42; Attended Transfer
Febr uaray-2006 Page 12 / 42 MasterVoIP VoIP t o GSM G ateway 3.1.4.3 Blind Transfer Assuming that call party A and B are in conversation. A wants to Blind Transfer B to C: 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. 2. Then “ A ” dials *87 then d...
Page 13 - Febr uaray-2006 Page 13 / 42; Call Features
Febr uaray-2006 Page 13 / 42 MasterVoIP VoIP t o GSM G ateway 3.1.5 Call Features The Following table shows the call features of VoIP Client ATA. Key Call Features *30 Block Caller ID (for all subsequent calls) *31 Send Caller ID (for all subsequent calls) *67 Block Caller ID (per call) *82 Send Cal...
Page 14 - Febr uaray-2006 Page 14 / 42; LED Light Pattern Indication; RED LED; indicates abnormal status; GREEN LED; indicates normal working status
Febr uaray-2006 Page 14 / 42 MasterVoIP VoIP t o GSM G ateway 3.1.7 LED Light Pattern Indication Following are the LED light pattern indications . RED LED indicates abnormal status DHCP Failed or WAN No Cable flash every 2 seconds (if DHCP is configured) VOIP Client-486 fails to register flash every...
Page 15 - Febr uaray-2006 Page 15 / 42; Configuration Guide; Configuring VOIP Client with a Web Browser
Febr uaray-2006 Page 15 / 42 MasterVoIP VoIP t o GSM G ateway 3.2 Configuration Guide 3.2.1 Configuring VOIP Client with a Web Browser VoIP Client ATA has an embedded Web server that will respond to HTTP GET/POST requests. VoIP Client ATA is enabled with embedded HTML pages, which allow a user to co...
Page 16 - Febr uaray-2006 Page 16 / 42
Febr uaray-2006 Page 16 / 42 MasterVoIP VoIP t o GSM G ateway The following table describes the various configurations to be performed:End User Password This contains the password to access the Web Configuration Menu. This field is case sensitive with max. 25 characters IP Address There are 2 modes ...
Page 17 - Febr uaray-2006 Page 17 / 42
Febr uaray-2006 Page 17 / 42 MasterVoIP VoIP t o GSM G ateway Here are the status details shown :
Page 18 - Febr uaray-2006 Page 18 / 42
Febr uaray-2006 Page 18 / 42 MasterVoIP VoIP t o GSM G ateway MAC Address The device ID, in HEX format. This is very important ID for ISP troubleshooting. WAN IP Address This field shows WAN port IP address. Product Model This field contains the product model info. Software Version Program: This is ...
Page 19 - Febr uaray-2006 Page 19 / 42
Febr uaray-2006 Page 19 / 42 MasterVoIP VoIP t o GSM G ateway 3.2.1.3 Advanced User Configuration To login to the Advanced User Configuration page, follow the instruction in section 3.2.1, they will lead You to the following page: (The password is case sensitive with a maximum length of 25 character...
Page 20 - Febr uaray-2006 Page 20 / 42
Febr uaray-2006 Page 20 / 42 MasterVoIP VoIP t o GSM G ateway The following window if for advanced configuration regarding IP, SIP, QoS, NAT, IP Telephony modes setting:
Page 21 - Febr uaray-2006 Page 21 / 42; Admin Password; Advanced; SIP Server; 060) of the outbound proxy. If there is no outbound proxy, this field; SHOULD
Febr uaray-2006 Page 21 / 42 MasterVoIP VoIP t o GSM G ateway Admin Password Administrator password: Only the administrator can configure the “ Advanced Settings ” page. Password field is purposely left blank for security reasons after Pressing update and save. The maximum password length is 25 char...
Page 22 - Febr uaray-2006 Page 22 / 42
Febr uaray-2006 Page 22 / 42 MasterVoIP VoIP t o GSM G ateway
Page 23 - Febr uaray-2006 Page 23 / 42
Febr uaray-2006 Page 23 / 42 MasterVoIP VoIP t o GSM G ateway SIP User ID This field contains the user part of the SIP address for this phone. e.g., if the SIP address is: sip:my_user_id@my_provider.com, then the SIP User ID is: my_user_id. Please do NOT include the preceding “ sip: ” scheme or the ...
Page 24 - Febr uaray-2006 Page 24 / 42
Febr uaray-2006 Page 24 / 42 MasterVoIP VoIP t o GSM G ateway Voice Frames per TX This field contains the number of voice frames to be transmitted in a single packet. When setting this value, the user should be aware of the requested packet time (used in SDP message) as a result of configuring this ...
Page 25 - Febr uaray-2006 Page 25 / 42
Febr uaray-2006 Page 25 / 42 MasterVoIP VoIP t o GSM G ateway Dial Plan Prefix This value contains the dial plan prefix string (typically an ASCII numeric string). If it is not blank, then this string will be used as a prefix to the target URI string in the “ To ” header field of an INVITE message. ...
Page 26 - Febr uaray-2006 Page 26 / 42
Febr uaray-2006 Page 26 / 42 MasterVoIP VoIP t o GSM G ateway Via TFTP Server This is the IP address of the configured tftp server. If it is non-zero or not blank, the IP phone will attempt to retrieve new configuration file or new code image (update) from the specified tftp server at boot time. It ...
Page 27 - Febr uaray-2006 Page 27 / 42
Febr uaray-2006 Page 27 / 42 MasterVoIP VoIP t o GSM G ateway Send Flash Event This parameter allows the user to control whether to send an SIP NOTIFY message indicating the Flash event, or just to switch to the voice channel when the user presses the Flash key. FXS Impedance Selects the impedance o...
Page 28 - Febr uaray-2006 Page 28 / 42; Syslog Level
Febr uaray-2006 Page 28 / 42 MasterVoIP VoIP t o GSM G ateway Syslog Level Select the ATA to report the log level. Default is NONE. The level is one of DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: • product model/version on boot up (INFO level) • NAT related...
Page 30 - Febr uaray-2006 Page 30 / 42; Restoring the Factory Default Settings; Encode
Febr uaray-2006 Page 30 / 42 MasterVoIP VoIP t o GSM G ateway 3.3 Restoring the Factory Default Settings Warning !!! Restoring the Factory Default Settings will DELETE all configuration information of the device. Please backup or print out all the settings before attempting the following steps. Plea...
Page 31 - Febr uaray-2006 Page 31 / 42; What is the VoIP Master and how it works; One Location in the
Febr uaray-2006 Page 31 / 42 MasterVoIP VoIP t o GSM G ateway 3.4 VoIP Master 3.4.1 What is the VoIP Master and how it works This device connects GSM cellular telephones to the internet, by way of VoIP (Voice over Internet Protocol). A GSM module,including a SIM card, is installed inside the VoIP de...
Page 32 - Febr uaray-2006 Page 32 / 42; 2 cellular phones
Febr uaray-2006 Page 32 / 42 MasterVoIP VoIP t o GSM G ateway 1. From your cellular phone, you can dial to the VoIP device . 2. The GSM module in the VoIP device provides you with a dial tone of Voice over Internet Protocol. 3 . You can now dial and make a telephone connection by way of the internet...
Page 33 - Febr uaray-2006 Page 33 / 42; COMport
Febr uaray-2006 Page 33 / 42 MasterVoIP VoIP t o GSM G ateway 3.4.2 Set-up and Installation Insert SIM and connect the cables as described below. 1. Insert SIM card into the VoIP Master as follows: a. Using the tip of the antenna (or a similar object), press on the small yellow button on the left si...
Page 34 - Febr uaray-2006 Page 34 / 42
Febr uaray-2006 Page 34 / 42 MasterVoIP VoIP t o GSM G ateway
Page 35 - Febr uaray-2006 Page 35 / 42; Installing the Manager Application; described in this chapter.
Febr uaray-2006 Page 35 / 42 MasterVoIP VoIP t o GSM G ateway 3.4.3 Installing the Manager Application Before operation, configuration settings must be made in the VoIP Master gateway. Configuration is done by a manger application in the computer. Install the manager application on the software cd, ...
Page 36 - Febr uaray-2006 Page 36 / 42; pressing
Febr uaray-2006 Page 36 / 42 MasterVoIP VoIP t o GSM G ateway 4. Click Next. The Setup Type window opens. 5. Select “ Complete ” and click “ Next ” . The “ Begin Installation ” window opens. VoIP Master 6. Click Install. Wait till the VoIP Master Manager application will install itself. 3.4.4 Define...
Page 37 - Febr uaray-2006 Page 37 / 42; In the toolbar, press . The Select Connection window opens.
Febr uaray-2006 Page 37 / 42 MasterVoIP VoIP t o GSM G ateway Start > Programs > EuroTech Communications > VoIP Master Manager. The VoIP Master Manager window opens. VoIP Master 2. In the toolbar, press . The Select Connection window opens. 3. Select the Com Port in the computer to which th...
Page 38 - Febr uaray-2006 Page 38 / 42
Febr uaray-2006 Page 38 / 42 MasterVoIP VoIP t o GSM G ateway
Page 39 - Febr uaray-2006 Page 39 / 42
Febr uaray-2006 Page 39 / 42 MasterVoIP VoIP t o GSM G ateway 3.4.5 Port and SIM Settings This chapter details port to SIM association as well as required and optional settings. 3.4.5.1 Dial Settings for the GSM Port After defining the Comport, press GSM Port in the left pane. The Port Setting windo...
Page 40 - Febr uaray-2006 Page 40 / 42; icon in the left pane. The; SIM; Setting window opens; In the Network box, enter the GSM network number of the SIM.; Write Settings
Febr uaray-2006 Page 40 / 42 MasterVoIP VoIP t o GSM G ateway 3.4.5.2 SIM Settings After making the port settings, press a SIM icon in the left pane. The SIM Setting window opens . VoIP Master 1 . In the PIN Code box, enter the PIN number of the SIM. 2. In the Network box, enter the GSM network numb...
Page 41 - Febr uaray-2006 Page 41 / 42; Set the
Febr uaray-2006 Page 41 / 42 MasterVoIP VoIP t o GSM G ateway 3.4.5.3 Follow Me Settings If there is no answer on the local phone connected to your VoIP gateway you can use a “ Follow me ” feature. The “ Follow me ” feature connects the incoming call to your cellular phone. To activate, after making...
Page 42 - Febr uaray-2006 Page 42 / 42
Febr uaray-2006 Page 42 / 42 MasterVoIP VoIP t o GSM G ateway 3.4.5.4 Call Back Settings A call back feature is available with the VoIP master gateway. If person A is having a conversion via the VoIP master gateway, and person B attempts to make a phone call via the same VoIP: 1. Person B will recei...
