GE 45233 GE Home Monitoring Wireless Color Camera wit User Manual

Page 3 - Wall mounting hardware; CHOOSING A CAMERA MOUNTING LOCATION

3 2. Wall mounting hardware 3. AC adapter CHOOSING A CAMERA MOUNTING LOCATION The 45233 Wireless Color Camera can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or outdoor use. When choosing a mounting location, please be advised: Do not use in wet locations. If using ou...

Page 4 - NIGHT VISION; When the image sensor detects enough

4 Sensor Infra-Red (IR) LEDs adapter outside or run the cord through walls. If you need to extend the AC adapter cable, 15 ft. extensions are available by contacting Customer Service at 800-654-8483. If using the optional rechargeable NiMH battery (sold separately), the operational time is up to 5 h...

Page 5 - Channel Selection

5 light, color will return to the images. MULTI-CAMERA SYSTEMS The 45233 Wireless Color Camera is designed as anadd-on camera to work with the following GE Color and B/W Wireless camera systems - 45234, 45235, 45236. These systems can accept a maximum of two cameras. Channel Selection Each wireless ...

Page 7 - Wall or desktop mount

7 3. Set Channelswitch on camerato 1 or 2. Slide thecamera onto the locking pins of the mounting plate. 4. Adjust antenna and camera angle as needed for the clearest picture. OPTIONAL WIRELESS BATTERY PACK AVAILABLE (SOLD SEPARATELY) Rechargeable NiMH Battery is available for use with the 45233 Wire...

Page 8 - SYMPTOM; No camera picture

8 TROUBLE SHOOTINGIf you are having trouble operating this product, please consult the guide below. If you have any questions or feel the camera system is notoperating correctly, or you simply need additional information, please visit our web sitewww.jascoproducts.com, or contact our Customer Servic...

Page 9 - CAMERA SPECIFICATIONS

9 Interference on camera picture 1. Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, monitor (receiver) or both to improve the reception quality. 3. If a camera is positioned close to the monitor, point ante...

Page 10 - WARRANTY

10 High-Speed Electronic Shutter ................. 1/60 - 1/15,000 secImage Sensor ........................................................................ 1/3” CMOSMin. Illumination .................. 0 lux up to 3 ft, 0.5 lux up to 10 ft Voltage .......................................................

Page 11 - FCC STATEMENT; WARNING; Risk of fire and shock

11 FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate...