Furuno GP-7000F - Manual
Furuno GP-7000F – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Plotter display
- Page 3 – Automatic Sounder Operation
- Page 4 – Suppressing Interference; OFF; Suppressing Low Level Noise; Fish alarm; Off; On; On
COLOR GPS/PLOTTER/SOUNDER
GP-7000F
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.
(Hard keys)
Key name
Function
MENU
key
Shows/hides the menu bar.
DISP
key
Shows/hides DISPLAY MODE menu.
MOB/WPT
key
Short press: Enters a waypoint. Long press: Enters the MOB mark.
TLL/GOTO
key
Sets the waypoint or route as destination.
ROUTE
key
Creates the route.
CLEAR
key
Silences the audible alarm; erases the various windows one by one.
POWER/BRILL
key
Long press: Turns power off.
Short press: Turns power on. Shows the
BACKLIGHT
window.
Cursor pad
Moves the cursor.
(Sounder) Moves the time cursor.
RANGE
key
Changes the range.
-: Shrinks the scale, and expands image.
+: Expands the scale, and shrinks image.
Hard keys
See below.
ENTER knob
Rotation: Selects menu items.
(Sounder) Moves VRM.
Push: Confirms entry.
Soft keys
Changes function according
to screen in use.
Card slots
Drive for chart/memory cards.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Plotter Returning Own Ship to Screen Center Press the CENTER soft key. Adjusting Brilliance 1. Press the BRILL key to show the BACKLIGHT window. 2. Rotate the ENTER knob to adjust the brilliance. 3. Push the ENTER knob to close the window. Entering Waypoints 1. Operate the cursor pad to place the ...
3 Sounder Sounder display (dual mode) Showing the Sounder Display 1. Press the DISP key. 2. Rotate the ENTER knob to choose the sounder icon ( ). 3. Push the ENTER knob. Selecting the Sounder Display Mode 1. Press the DISP soft key. NORMAL BOTTOM LOCKBOTTOM ZOOMMARKER ZOOMBOTTOM DISCRIM INATION 2. R...
4 Suppressing Interference 1. Press the MENU key to show the menu bar. 2. Choose NOISE LIMITER from the SENSITIVITY menu, and then push the ENTER knob. OFF LOWMEDIUMHIGH 3. Rotate the ENTER knob to choose LOW, MEDIUM or HIGH as appropriate. 4. Push the ENTER knob. Suppressing Low Level Noise 1. Pres...
