Furuno GP-1850WD, GP-1850W - Manual

Page 3 - SAFETY INSTRUCTIONS; Do not open the equipment.; Electrical shock can result.; Use the proper gain setting.; About the TFT LCD

i SAFETY INSTRUCTIONS Do not disassemble or modify the equipment. Fire, electrical shock or serious injurycan result. Do not open the equipment. Immediately turn off the power at the switchboard if the equipment is emittingsmoke or fire. Continued use of the equipment can causefire or electrical sho...

Page 4 - ii; TABLE OF CONTENTS; OVERVIEW

ii TABLE OF CONTENTS FOREWORD .................................. iv SYSTEM CONFIGURATION ......... v WHAT IS WAAS? ........................... vi 1. OPERATIONAL OVERVIEW 1.1 Display Unit Controls .....................1-1 1.2 Remote Controller..........................1-2 1.3 Inserting Mini Chart Car...

Page 5 - iii; CUSTOMIZING YOUR UNIT

TABLE OF CONTENTS iii 10. CUSTOMIZING YOUR UNIT 10.1 CHART SETUP OPTIONS menu 10-1 10.2 DISPLAY OPTIONS menu .......... 10-3 10.3 GPS/DGPS/TD OPTIONS menu ........................................... 10-4 10.4 CONFIGURATION menu............. 10-8 11. USING C-MAP NT MODEL 11.1 Inserting Chart Card ......

Page 6 - iv; FOREWORD; Features; Comprehensive navigation data displays.

iv FOREWORD A Word to GP-1850WD/1850W Owners Congratulations on your choice of the FURUNO GP-1850WD COLOR DGPS/PLOTTER, GP-1850W COLOR GPS/PLOTTER. We are confident you will see why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjo...

Page 7 - SYSTEM CONFIGURATION; ANTENNA UNIT; DISPLAY UNIT; Rectifier

v SYSTEM CONFIGURATION Ship's mains12-24 VDC External equipment(Autopilot, etc.) DGPS beacon receiver(GP-1850W only) ANTENNA UNIT Receives signal fromGPS satellite and beacon reference station.(GP-1850WD only) DISPLAY UNIT GPA-017 (GP-1850W) GPA-019(GP-1850WD) Rectifier PR-62 Ship's mains100/110/115...

Page 8 - vi; W A A S; This manual uses “WAAS” when referring to any SBAS provider.

vi WHAT IS WAAS? WAAS, available in North America, is a provider in the worldwide SBAS (Satellite Based Augmentation System) navigation system. An SBAS provider furnishes GPS signal corrections to SBAS users. Two more SBAS providers are also currently under development, MSAS (Multi-Functional Satell...

Page 9 - Display Unit Controls; Display unit

1-1 1. OPERATIONAL OVERVIEW This chapter acquaints you with the basics of your unit - from turning on the power to the soft key menu operation. 1.1 Display Unit Controls SAVE MOB ENTER ABC 1 DEF 2 GHI 3 JKL 4 MNO 5 PQR 6 STU 7 VWX 8 YZ& 9 CLEAR _'# 0 MENU HIDE SHOW WPT RTE XTE HIWAY PLOT ALARM P...

Page 10 - OPERATIONAL OVERVIEW; Controller; Remote controller

1. OPERATIONAL OVERVIEW 1-2 1.2 Remote Controller MOB SAVE ALARM SW 1 SW 2 SW 3 SW 4 SW 5 SHOW HIDE BRILL TONE XTE/ HIWAY PLOT WPT RTE CENTER ZOOM IN/OUT MENU ABC 1 JKL 4 STU 7 ENTER DEF 2 MNO 5 VWX 8 _'#0 GHI 3 PQR 6 YZ 9 CLEAR CANCEL Adjust tone. Adjust brilliance. Shows/hides softkey menu. Soft k...

Page 11 - Static electricity can be passed; Direction of mini chart card; Turning the power on

1. OPERATIONAL OVERVIEW 1-3 1.3 Inserting Mini Chart Card Insert appropriate mini chart card before turning on the power. Note: Static electricity can be passed through your fingers to a memory card and destroy the contents of the card. To prevent this, always touch a metallic object, such as a stee...

Page 12 - Display abbreviations; Turning the power off; Tone and brilliance adjustment window

1. OPERATIONAL OVERVIEW 1-4 When the satellite signal is being received normally, the GP-1850WD/1850W displays various abbreviations at the bottom left-hand corner of the display which show DGPS/GPS receiver status. The table in below shows these abbreviations and their meanings. Display abbreviatio...

Page 13 - Displays

1. OPERATIONAL OVERVIEW 1-5 1.6 Plotter Displays Press the [PLOT] key. Each time this key is pressed, the display mode changes in the sequence shown below. For display mode, refer to Chapter 2. [Plotter Display] DGPS 3D NAV POS COURSE UP ZOOM OUT ZOOM IN NORTH UP BRIDGE FISH WP-002 [Nav Data Display...

Page 14 - Main menu; Display setup menu; TIME DISPLAY; Time display window

1. OPERATIONAL OVERVIEW 1-6 1.8 Menu Operation, Soft Keys Most operations are carried out through the menu which is opened and closed with the [MENU] key. Menus may be selected with the five soft keys to the right of menus. Options are selected with the cursor pad. 1. Press the [MENU] key to display...

Page 15 - Display; Demo setting screen; Demo mode window

1. OPERATIONAL OVERVIEW 1-7 1.9 Demonstration Display The demonstration display provides simulated operation of this unit. On the plotter display, own ship tracks, at the speed selected, a figure eight course or any course you enter, starting from position entered. All controls are operative; you ma...

Page 16 - This page is intentionally left blank.

1. OPERATIONAL OVERVIEW 1-8 This page is intentionally left blank.

Page 17 - DISPLAYS; Modes; or more, it is automatically brought

2-1 2. PLOTTER DISPLAYS 2.1 Presentation Modes The plotter display mainly shows chart, ship’s track, waypoints, and navigation data. Three types of display presentations are provided for the normal plotter display: north-up, course-up and auto course-up. To change the mode, use the presentation mode...

Page 18 - Shifting the Display; Locate the cursor at a screen edge. The; Nav; Sequence of pressing the bottom soft key

2. PLOTTER DISPLAYS 2-2 2.2 Cursor Turning on the cursor, shifting the cursor Press the cursor pad to turn the cursor on, and the cursor appears at the own ship’s position. Operate the cursor pad to shift the cursor. The cursor moves in the direction of the arrow or diagonal pressed on the cursor pa...

Page 19 - Chart icons and their meanings; Icon; Indices and chart enlargement

2. PLOTTER DISPLAYS 2-3 2.5 Selecting Chart Scale/Range Chart scale (range) may be selected with the ZOOM IN or ZOOM OUT soft key. ZOOM IN expands the chart; ZOOM OUT shrinks it. 2.6 Mini Chart Cards The mini chart cards contain nautical charts. When you insert a suitable mini chart card in the slot...

Page 20 - showing indices; Remarks on chart display; FURUNO mini chart card; Symbol Description; Comparison of FURUNO and Nav-Charts; chart cards; chart may not center the; chart may not center own; is the registered trademark

2. PLOTTER DISPLAYS 2-4 Sample chart (Japan and South Korea) showing indices Remarks on chart display A chart will not be displayed in the following conditions: • When the chart scale is too large or too small. When this happens, select proper chart scale. • When scrolling the chart outside the indi...

Page 21 - Aid to navigation data; Placing the cursor on the mark; mini chart cards; Plotter display showing Nav-Charts; port service display; Port service icons

2. PLOTTER DISPLAYS 2-5 Aid to navigation data Selected FURUNO and NAVIONICS mini chart cards can show buoy and lighthouse data. Simply place the cursor on the lighthouse or buoy mark. Place the cursor ona lighthouse or buoy mark. Placing the cursor on the mark NAVAID: /FL 6S 12MFROM OS 52.38nm 48.0...

Page 22 - Navigation Data Display; Navigation data display; Enlarging an indication; GPS satellite monitor display

2. PLOTTER DISPLAYS 2-6 2.7 Navigation Data Display The navigation data display provide generic navigation data and DGPS/GPS information. Press the [PLOT] several times to show the navigation data display. DGPS 3D BEACON INFO SAT INFO ZOOM TD LAT/LON DATE: JUN 30 2002 TIME 23:59:59 POSITION 34 ° 56....

Page 23 - Beacon information display; Steering display; How to read the compass display; Course means the direction which

2. PLOTTER DISPLAYS 2-7 Beacon information display The DGPS beacon receiver-equipped model, can show DGPS reference station information. Press the BEACON INFO soft key to show the DGPS reference station information. DGPS 3D RETURN BEACON INFO MODEFREQBAUDRATE AUTO SEARCH 288.0kHz 200 BPS RECEIVED DA...

Page 24 - display the following window.; Highway display

2. PLOTTER DISPLAYS 2-8 How to read the XTE indication The black boat-shaped mark shows own boat’s movement and direction, and the amount to steer to return to course. Using the figure shown on the previous page as an example, you would steer right by 000.02 nautical miles to return to course. When ...

Page 25 - at FISHING 1 or 2 mode

2. PLOTTER DISPLAYS 2-9 2.10 Changing Operation Mode Operation mode can be changed among PLEASURE, FISHING1 and FISHING2. FISHING1 or 2 mode provides mark/line entry at the cursor or own ship’s position. On FISHING 1 or 2 mode, pressing the [HIDE/SHOW] key changes the function of soft keys. Holding ...

Page 26 - Selecting fishing 1, fishing 2 mode; Display setup1 menu; Operation mode window; Navigation Trip Distance; Resetting trip distance; Clear memory menu

2. PLOTTER DISPLAYS 2-10 Selecting fishing 1, fishing 2 mode 1. Press the [MENU] key and the DISPLAY OPTIONS soft key. The display setup1 menu appears. DGPS 3D DISPLAY SETUP1 RETURN EDIT RNG & BRG MODERANGE/SPEED UNITDEPTH UNITTEMP UNITLAT/LON DISPLAYTIME DISPLAYWAYPOINTS SWCOURSE VECTORBEARINGM...

Page 27 - Track; Chart setup menu; Track control menu; Plotting of Track

3-1 3. TRACK 3.1 Displaying Track 1. Press the [MENU] key to open the main menu. MENU DGPS 3D CHART SETUP OPTIONS GPS/DGPS/TD OPTIONS DISPLAY OPTIONS CONFIGURATION Main menu 2. Press the CHART SETUP OPTIONS soft key to open the CHART SETUP OPTIONS menu. CHART SETUP DGPS 3D CHART OFFSET CHART DETAILS...

Page 28 - Changing Track Color; Track color window; Track plotting method; Plot window

3. TRACK 3-2 When the fishing mode is selected, you can stop or restart plotting the track with the soft key only on the plotter display. Press the [HIDE/SHOW] key several times to show the STOP TRACK soft key on the plotter display. Press the STOP TRACK soft key to stop plotting of track. The messa...

Page 29 - Track plotting interval; Interval window; Note; TRACK MEMORY; Track memory window

3. TRACK 3-3 Track plotting interval 1. Press the [MENU] key followed by the CHART SETUP OPTIONS and TRACK CONTROL soft keys. 2. Press ▲ or ▼ to select TIME INTERVAL or DIST INTERVAL. 3. Press the EDIT soft key to display the INTERVAL window. TIME INTERVAL 0 1 m 00 s (When selecting TIME INTERVAL.) ...

Page 30 - Tracks; Erasing tracks by area; TRACKING; Erase menu; Erasing tracks by color; then press the EDIT soft key.; Erasing all track; press the EDIT soft key.

3. TRACK 3-4 3.6 Erasing Tracks Be absolutely sure you want to erase track; erased track cannot be restored. Erasing tracks by area You can erase tracks within an area you set. 1. Press the [MENU] key followed by the CHART SETUP OPTIONS, TRACK CONTROL and ERASE T & M soft keys. DGPS 3D ERASE ERA...

Page 31 - Marks; Plotter display; Changing displays

4-1 4. MARK You can enter marks to denote important locations, such as a good fishing spot. In the default condition, you may enter 3000 marks. 4.1 Entering Marks Select the FISHING 1 or FISHING 2 mode to enable entry of marks on the PLOTTER display. Select the location desired with the cursor, or t...

Page 32 - Mark shape; Mark shape window; Mark line window; Mark color window

4. MARK 4-2 4.2 Changing Mark Attributes You can select shape, line and color of marks and lines on the plotter display. 1. Press the [HIDE/SHOW] key to show the MARK EDIT soft key. 2. Press the MARK EDIT soft key to show the MARK/LINE window. DGPS 3D MARKEDIT RETURN MARK SHAPE MARK LINE MARK SHAPE ...

Page 33 - Chart details menu; Erasing individual marks/lines

4. MARK 4-3 4.3 Changing Mark Size Mark size can be selected from STD (standard) and SMALL. 1. Press the [MENU] key to display the main menu. 2. Press the CHART SETUP OPTIONS soft key. 3. Press the CHART DETAILS soft key to open the CHART DETAILS menu. DGPS 3D CHARTDETAIL RETURN EDIT DEPTH INFO LAT/...

Page 34 - Mark

4. MARK 4-4 4.5 Displaying Track and Mark Points Number of track and mark points used appears in the TRACK STATUS window on the TRACK CONTROL display. DGPS 3D TRACKCONTROL DISPLAY TRACK ONTRACK COLOR WHITEPLOT TIME TIME INTERVAL 01m00sDIST INTERVAL 00.10 nmTRACK MEMORY 2000 POINTS (MARK MEMORY) (300...

Page 35 - Waypoints; Entering waypoints at MOB position; MOB message; Entering waypoints by the cursor; Waypoint & route menu

5-1 5. WAYPOINTS 5.1 Entering Waypoints In navigation terminology, a waypoint is a particular location on a voyage whether it be a starting, intermediate or destination point. A waypoint is the simplest piece of information your equipment requires to get you to a destination, in the shortest distanc...

Page 36 - Waypoints menu; Waypoint window; Mark shape selection window; Mark color selection window

5. WAYPOINTS 5-2 2. Press the WAYPOINTS soft key to display the WAYPOINTS menu. WPT DGPS 3D LOCAL LIST WAYPOINT BY CURSOR ALPHA/NUMERIC LIST WAYPOINT BY RANGE & BEARING RETURN ADD/EDIT/MOVE WAYPOINTS Waypoints menu 3. Press the WAYPOINT BY CURSOR soft key. The plotter display appears. 4. Operate...

Page 37 - Changing waypoint position; Plotter display, range and bearing selected

5. WAYPOINTS 5-3 Changing waypoint name, comment, proximity alarm radius 1. If necessary, you can change the name (up to 6 characters), comment (up to 13 characters), L/L position and the proximity alarm radius (explained in detail in Chapter 8) as follows: a) Select the NAME, COMMENT or PROXIMITY A...

Page 38 - Local list; ABCDEF; Search window; Alphanumeric list; Individual; Erasing waypoints by the cursor

5. WAYPOINTS 5-4 Entering waypoints by latitude and longitude position 1. Press the [WPT/RTE] key to open the WAYPOINT & ROUTE menu. 2. Press the WAYPOINTS soft key to open the WAYPOINT menu. 3. Press the LOCAL LIST (lists waypoints in order from nearest to furthest) or ALPHA/NUMERIC LIST (lists...

Page 41 - Routes; Entering routes through the route list; Press the ROUTES soft key to open the; Route menu; New route entry window

6-1 6. ROUTES Often a trip from one place to another involves several course changes, requiring a series of route points (waypoints) which you navigate to, one after another. The sequence of waypoints leading to the ultimate destination is called a route. Your unit can automatically advance to the n...

Page 42 - Entering routes by the cursor; Connect route window

6. ROUTES 6-2 4. If desired you can change the route name shown and/or add a comment. To change route name, press the [CLEAR] key to clear the route name. Use the cursor pad to position the cursor and then press appropriate alphanumeric key. To enter a comment, place the cursor in the COMMENT window...

Page 43 - Edit route menu; Waypoint list for editing a route (Local list); Changing waypoints through the list

6. ROUTES 6-3 6.3 Inserting, Removing Waypoints Inserting waypoints through the route list Waypoints can be inserted in routes as follows: 1. Press the [WPT/RTE] key followed by the ROUTES soft key to open the ROUTE menu. 2. Select a route by pressing ▲ or ▼ . 3. Press the EDIT ROUTE soft key. The r...

Page 44 - Removing waypoints from routes

6. ROUTES 6-4 Inserting waypoints on the plotter display Inserting waypoints before the first waypoint or after the last waypoint 1. Press the [WPT/RTE] key followed by the ROUTES soft key to open the ROUTE menu. 2. Press ▲ or ▼ to select the route desired. 3. Press the EDIT ROUTE soft key. 4. Press...

Page 45 - Press the CREATE VOYAGE BASED; Save route menu; New route window; SAVE icon appearance on the plotter display

6. ROUTES 6-5 6.4 Creating Track-based Routes You can create routes based on your ship’s track by entering waypoints at own ship’s position. This feature is useful when you wish to retrace a track. 1. Press the [WPT/RTE] key to open the WAYPOINT & ROUTE menu. 2. Press the CREATE VOYAGE BASED ROU...

Page 46 - or

6. ROUTES 6-6 7. Press the [SAVE/MOB] key with a touch-and-release action to enter a waypoint mark at own ship position. A new waypoint is created under the next consecutive waypoint number and that waypoint is added to the route. 8. Repeat step 7 whenever you change course. 35 waypoints can be ente...

Page 47 - Selecting quick point entry method; SET GOTO METHOD window; Navigating to a single quick point

7-1 7. NAVIGATION 7.1 Navigating to “Quick Points” The “quick point” feature allows you to navigate to point(s) without retaining the data indefinitely in your unit’s memory. Each time a quick point is entered previous quick points have the same numbers as newly entered ones are written over. Select...

Page 49 - Sample port service list; If you selected PORT at step 7,; use the; Sample filling station locations

7. NAVIGATION 7-3 ▼ SELECT PORT SERVICE Sample port service list 8. If you selected PORT at step 7, use the cursor pad to select a port and press the [ENTER] key. Make a route using the soft keys and press the [ENTER] key. (If you want to go directly to that port, simply press the soft key ADD QP fo...

Page 50 - Following a Route; ROUTE soft key to open the route list.; Plotter display, route selected as destination; Navigate directly to a route waypoint; Example of when to restart navigation; Log display

7. NAVIGATION 7-4 7.4 Following a Route 1. Press the [WPT/RTE] key followed by the ROUTE soft key to open the route list. 2. Press ▲ or ▼ to select a route. 3. Press the GO TO soft key to show the plotter display. DGPS 3D RETURN WPT FROMOS FISH 1.3 nm208.5 ° ZOOM IN ZOOM OUT GO TO WPT RVSE ROUTE GO ...

Page 51 - Setting speed for ETA calculation; Select speed for ETA window; Switching waypoints; Own Ship; Waypoint; Waypoint SW window

7. NAVIGATION 7-5 Setting speed for ETA calculation Speed, which may be input manually or automatically, is required to calculate ETA (Estimated Time of Arrival) to a waypoint. 1. Press the [WPT/RTE] key to display the WAYPOINT & ROUTE menu. 2. Press the LOG soft key. 3. Press the SPEED soft key...

Page 52 - Navigation

7. NAVIGATION 7-6 7.5 Canceling Navigation 1. Press the [WPT/RTE] key. 2. Press the LOG soft key. 3. Press the STOP soft key. 4. Press the [ENTER] key to go stand by. 5. Press the RELEASE soft key. 6. Press the [ENTER] key.

Page 53 - ALARMS; Alarm; Alarm menu; Audio alarm window

8-1 8. PLOTTER ALARMS 8.1 Introduction There are five plotter-related alarms which generate both audible and visual alarms: Arrival alarm, Anchor Watch alarm, XTE (Cross Track Error) alarm, Proximity alarm, and Speed alarm. When an alarm setting is violated the buzzer sounds, and the speaker icon ( ...

Page 54 - Own ship; How the arrival alarm works; Arrival alarm window; Watch; How the anchor watch alarm works; Anchor watch alarm window

8. PLOTTER ALARMS 8-2 8.3 Arrival Alarm The arrival alarm informs you that your boat is approaching a destination waypoint. The area that defines an arrival zone is that of a circle which you approach from the outside of the circle. The alarm will be released if your boat enters the circle. When the...

Page 55 - How the XTE alarm works; XTE alarm window; Speed alarm window; Proximity alarm window

8. PLOTTER ALARMS 8-3 8.5 XTE (Cross Track Error) Alarm The XTE alarm warns you when your boat is off its intended course. When the XTE alarm is active, two red dashed lines mark the XTE alarm area. : Alarm Destination waypoint Own ship'sposition Alarmsetting How the XTE alarm works 1. Press the [AL...

Page 56 - Information; Alarm messages; Alarm messages and their meanings; Message Meaning

8. PLOTTER ALARMS 8-4 8.8 Alarm Information When an alarm setting has been violated the buzzer sounds and the speaker icon (shown in red) appears. You can see which alarm has been violated, as well as silence the buzzer, on the alarm menu display. 1. Press the [ALARM] key. DGPS 3D ALARM EDIT CLEAR A...

Page 57 - Memory; format into the slot.; Download/upload menu; Save data display

9-1 9. MEMORY CARD OPERATIONS The following data can be saved to memory cards: • Mark/line • Waypoints/routes • Track • Configuration (menu settings) 9.1 Formatting Memory Cards Before you can use a memory card it must be formatted. Note that formatting a used card erases all saved data. 1. Turn the...

Page 58 - Saving data; SAVE DATA message

9. MEMORY CARD OPERATIONS 9-2 7. Press the [ENTER] key to format (or press the [CLEAR] key to escape). Now FORMATTING MEMORY CARD appears. Do not remove the card while it is being formatting. When the formatting is completed, FORMAT COMPLETED appears. 8. Press the [ENTER] key to finish. Now you can ...

Page 59 - MEMORY CARD OPERATIONS; Error messages; Memory card not inserted; Data overwrite; Overwrite message; Load data display

9. MEMORY CARD OPERATIONS 9-3 Error messages Memory card not inserted Press the [ENTER] key to return to the SAVE DATA display. MEMORY CARD NOT INSERTED. INSERT CARDPRESS "ENTER" key TO CONTINUE. Not inserted message Unformatted memory card Press the [ENTER] key to return to the SAVE DATA di...

Page 60 - Notes on loading data; Configuration

9. MEMORY CARD OPERATIONS 9-4 NOW LOADING DATA FROMMEMORY CARD. DO NOT TURN OFF THE POWER UNTILLOADING COMPLETE. Load data message After loading is completed, the following message appears. COMPLETE LOADING DATA.PRESS "ENTER" KEYTO CONTINUE. Complete message 7. Press the [ENTER] key. Notes o...

Page 61 - CUSTOMIZING YOUR UNIT; SETUP; Press the CHART SETUP OPTIONS soft; Chart setup options menu; CHART OFFSET menu; Plotter display, chart offset selected; TRACK CONTROL menu

10-1 10. CUSTOMIZING YOUR UNIT This section describes the various options which allow you to set up your unit to suit your needs. 10.1 CHART SETUP OPTIONS menu The chart offset options menu provides three menus: chart offset, track control, and chart details. 1. Press the [MENU] key to open the main...

Page 62 - CHART DETAILS menu; Chart details menu description

10. CUSTOMIZING YOUR UNIT 10-2 CHART DETAILS menu 1. Press the [MENU] key followed by the CHART SETUP OPTIONS and CHART DETAILS soft keys. DGPS 3D CHARTDETAIL RETURN EDIT DEPTH INFO LAT/LON GRIDTEXT INFOWAYPOINTWAYPOINT NAMEINDEXLANDMASSBACKGROUNDNAV AIDSSECTOR INFOOTHER SYMBOLSMARK SIZE GREENON LAR...

Page 63 - OPTIONS; The display setup1 menu appears.; DISPLAY SETUP menu description

10. CUSTOMIZING YOUR UNIT 10-3 10.2 DISPLAY OPTIONS menu This menu contains items for setting up the plotter displays. 1. Press the [MENU] key. 2. Press the DISPLAY OPTIONS soft key. The display setup1 menu appears. DGPS 3D DISPLAY SETUP RETURN EDIT RNG & BRG MODERANGE/SPEED UNITDEPTH UNITTEMP U...

Page 64 - Mag variation window

10. CUSTOMIZING YOUR UNIT 10-4 MAG VARIATION The magnetic variations for all areas of the earth are preprogrammed into this unit. The preprogrammed variation is accurate for most instances, however you may wish to manually enter a updated variation referring to the latest navigation chart. 1. Select...

Page 65 - GPS SETUP options menu; Geodetic datum window

10. CUSTOMIZING YOUR UNIT 10-5 GPS SETUP OPTIONS menu description This menu provides items for setting up the GPS receiver. To display it, display the menu shown above, and then press the GPS SETUP OPTIONS soft key. GPS OPTION DGPS 3D RETURN LOCAL TIME OFFSET +00:00 GEODETIC DATUMS WGS-84 POS SMOOTH...

Page 66 - DGPS/WAAS SETUP OPTIONS menu

10. CUSTOMIZING YOUR UNIT 10-6 GPS SPEED AVE Calculation of ETA is based on average ship’s speed over a given period. If the period is too long or too short calculation error will result. Change this setting if calculation error occurs. The default setting is 60 seconds, which is suitable for most c...

Page 67 - Longitude Range Satellite; TD SETUP menu; TD setup menu; Displaying LORAN C TDs

10. CUSTOMIZING YOUR UNIT 10-7 search, select MANUAL here, and use the cursor pad to select frequency of DGPS reference station. The default setting is AUTO. BEACON BAUD RATE (for DGPS) Selects the transmission rate of the DGPS reference station nearest you, among AUTO (default setting), 50, 100 or ...

Page 68 - Displaying DECCA TDs; Chain sta. pair window; menu; Configuration menu

10. CUSTOMIZING YOUR UNIT 10-8 Displaying DECCA TDs 1. Select DEC CHAIN and press the EDIT soft key to show the chain sta. pair window. CHAIN STA. PAIR ▲ 20 P-R ▼ FRENCH ▲ Chain sta. pair window 2. Press ▲ or ▼ to select Decca chain number. Press ► to enable selection of lane, and then press ▲ or ▼ ...

Page 69 - UPLOAD/DOWNLOAD DATA menu; Upload/download menu; Display unit, rear view

10. CUSTOMIZING YOUR UNIT 10-9 FORMAT Selects NMEA0183 version 1.5 or 2.0. If you are unsure of the version number, try both equipment and choose the one which outputs data correctly. LAT/LON FORMAT (GGA only) Selects the minutes of latitude and longitude positions in hundredths, thousandths or ten ...

Page 71 - Waypoint data format

10. CUSTOMIZING YOUR UNIT 10-11 Waypoint data format 1 2 3 4 5 6 7 7 P F E C , G P w p l , l l l l . l l l , a , y y y y y . y y y , a , c - - - - c , c , c - - - - c , A < C R > < L F > 8 Waypoint data format 1: Waypoint latitude 2: N/S 3: Waypoint longitude 4: E/W 5: Waypoint name (Num...

Page 73 - Inserting Chart Card; Push down the lid catch to open the chart; Card slot; Location of chart card slot cover

11-1 11. USING C-MAP NT MODEL The GP-1850WD/1850W C-MAP NT series uses FURUNO mini chart cards and C-MAP NT-FP chart cards. These charts show accurate coastlines, depth contours, place names, aids to navigation such as buoys and lighthouses, and other navigational marks. 11.1 Inserting Chart Card 1....

Page 74 - Cursor and Data Display; Objects window

11. USING C-MAP NT MODEL 11-2 11.2 Cursor and Data Display Besides its fundamental functions of providing position data, the cursor can also show caution area, depth area, source of data, etc. Further, you can display information about an icon by placing the cursor on it. 1. Press the cursor pad to ...

Page 75 - Object windows; Tide icon; Port Info; HORTEN; Sunrise; TIDE window

11. USING C-MAP NT MODEL 11-3 R G W R Objects Navigation mark, fixed Extended navigational aid, geLightLightLightLight Depth contourLand areaSource of data Object windows 3. Press ▲ or ▼ to select the item desired. 4. Press the [ENTER] key to display detailed information. Color whiteHeight 7. 00 Met...

Page 76 - DATE; DATE window; Services; SET GO TO METHOD window

11. USING C-MAP NT MODEL 11-4 5. Press the DATE soft key to open the DATE window. DATE DD/MM/YYYY 0 1 / 01 / 2000 DATE window 6. Use ◄ or ► to position the cursor where desired and then press the appropriate numeric keys to enter a date. 7. Press the ENTER soft key or the [ENTER] key to show the tid...

Page 77 - SELECT PORT SERVICE; SELECT PORT SERVICE window; Make route window; Go directly to port service selected:; Press the ADD QP soft key.; Destination is automatically cancelled

11. USING C-MAP NT MODEL 11-5 7. Press the NEAR SRVICE soft key. The SELECT PORT SERVICE window appears. Currently selected icon SELECT PORT SERVICE Health emergency SELECT PORT SERVICE window 8. Use the cursor pad to select service mark desired. Currently selected icon is circumscribed. The name of...

Page 78 - Lighthouse; Lighthouse appearance when sector info

11. USING C-MAP NT MODEL 11-6 11.5 Setting Chart Setup Options CHART DETAILS menu 1. Press the [MENU] key followed by the CHART SETUP OPTIONS and CHART DETAILS soft key. DGPS 3D CHART DETAIL RETURN EDIT DEPTH INFO LAT/LON GRIDTEXT INFOWAYPOINTWAYPOINT NAMEINDEXLANDMASSBACKGROUNDNAV AIDSSECTOR INFOOT...

Page 79 - FOR FURUNO CHART; Depth info display; Chart

11. USING C-MAP NT MODEL 11-7 1. With the CHART DETAILS menu displayed, press the DEPTH INFO soft key to show the following display. DGPS 3D RETURN DEPTH INFO EDIT DEPTH < 10 mDEPTH = 10 mDEPTH > 10 mDEPTH INFO REDYELLOWLIGHT BLUERED FOR FURUNO CHART 10 m : APPROX. 30 ft or 5 fa FOR C-MAP CHAR...

Page 80 - Press the CONFIGURATION soft key to; Program Number

11. USING C-MAP NT MODEL 11-8 11.7 Displaying Program Number 1. Press the [MENU] key to open the main menu. 2. Press the CONFIGURATION soft key to show the CONFIGURATION n menu. 3. Press the SYSTEM MENU soft key to open the SYSTEM MENU. 4. Press the SELF TEST soft key to open the TEST menu. 5. Press...

Page 81 - TROUBLESHOOTING; Recommended maintenance program; Item Check

12-1 12. MAINTENANCE & TROUBLESHOOTING 12.1 Maintenance Regular maintenance is essential for good performance. A maintenance program should be established and should at least include the items listed in below. Do not open the equipment. Hazardous voltage which cancause electrical shock, burn or ...

Page 82 - Battery; Use the correct fuse.; CAUTION; Type; Troubleshooting

12. MAINTENANCE & TROUBLESHOOTING 12-2 12.2 Replacement of Fuse, Battery The fuse on the power cable protects the system from reverse polarity of the ship’s mains and equipment fault. If the fuse blows, find the cause before replacing it. Use only a 5 A fuse. Using the wrong fuse will damage the...

Page 83 - Messages; NO GPXS FIX; Tests; System menu

12. MAINTENANCE & TROUBLESHOOTING 12-3 12.4 Error Messages This GP-1850W/1850WD displays the following error messages on the alarm menu to alert you to possible trouble. Error messages Error Message Meaning, remedy NO GPXS FIX No GPS signal. Check antenna cable. NO DIFFERENTIAL GPS CORRECTION. (...

Page 84 - Test menu; The test runs continuously. To return to; Keyboard test; Press the KEYBOARD TEST soft key to

12. MAINTENANCE & TROUBLESHOOTING 12-4 PROGRAM: OK No.14518260** RETURN TEST SRAM: OK DRAM: OK PORT1: OK* PORT2: OK * INTERNALBATTERY: OK GPSRECEIVER: OK No.48502060** BEACONRECEIVER: OK No.08501820**No. * : Special connections are required to check these ports. Otherwise, "--" appears.*...

Page 85 - Display test; Press the TEST PATTERN soft key to; Display test pattern; Remote controller test; Press the REMOTE CONTROLLER

12. MAINTENANCE & TROUBLESHOOTING 12-5 Display test 1. Press the [MENU] key followed by the CONFIGURATION, SYSTEM MENU and SELF TEST soft keys to display the TEST menu. 2. Press the TEST PATTERN soft key to open the test pattern display. 3. Press the [ENTER] key to change the test pattern. TEST ...

Page 86 - Memories; key to open the clear memory menu.

12. MAINTENANCE & TROUBLESHOOTING 12-6 12.6 Clearing Memories The memory, which stores marks, tracks and initial settings, can be cleared to start afresh. When this done all default settings are restored. 1. Press the [MENU] key followed by the CONFIGURATION and SYSTEM MENU soft key. 2. Press th...

Page 87 - MENU TREE

A-1 MENU TREE DISPLAY OPTIONS RNG & BRG MODE (GREAT CIRCLE, RHUMB LINE) RANGE/SPEED UNIT ( nm/kt, km/km/h, sm/sm/h) DEPTH UNIT (m, ft, fa) TEMP UNIT ( ° C, ° F) LAT/LON DISPLAY (DD ° MM.MM', DD ° MM.MMM', DD ° MM.MMMM') TIME DISPLAY (12HOUR, 24HOUR) WAYPOINTS SW (AUTO1, AUTO2, MANUAL) COURSE VEC...

Page 89 - LORAN C CHAINS

A-3 LORAN C CHAINS n i a h C I R G 1 S 2 S 3 S 4 S 5 S c i f i c a P l a r t n e C 0 9 9 4 1 1 9 2 – – – t s a o C t s a E n a i d a n a C 0 3 9 5 1 1 5 2 8 3 – – ) a e r o K ( n o i L o d n a m m o C 0 7 9 5 1 1 1 3 2 4 – – t s a o C t s e W n a i d a n a C 0 9 9 5 1 1 7 2 1 4 – – a i b a r A i d u...

Page 90 - DECCA CHAINS

A-4 DECCA CHAINS n i a h C . o N n i a h C n i a h C e d o c n o i t a c o L n i a h C . o n n i a h C n i a h C e d o c n o i t a c o L 1 0 c i t l a B h t u o S A 0 e p o r u E 4 3 o t n a K C 8 n a p a J 2 0 t e d n a l t s e V E 0 " 5 3 u k o k i h S C 4 " 3 0 h s i t i r B t s e w h t u...

Page 91 - WORLD TIME

Page 92 - GEODETIC CHART LIST

A-6 GEODETIC CHART LIST 001: W GS84 002: W GS72 003: TOKYO : Mean Value (Japan, Korea & Okinawa) 004: NORTH AMERICAN 1927 : Mean Value (CONUS) 005: EUROPEAN 1950 : Mean Value 006: AUSTRALIAN GEODETIC 1984 : Australia & Tasmania 007: ADINDAN- MN : Mean Value (Ethiopia & Sudan) 008: ADINDA...

Page 93 - SPECIFICATIONS OF; GENERAL

SP - 1 E4425S01A -M SPECIFICATIONS OF COLOR GPS/ PLOTTER: GP-1850W COLOR DGPS/ PLOTTER: GP-1850WD 1 GENERAL 1.1 Display 6.5-inch high resolution color LCD 1.2 Projection Mercator 1.3 Usable Area 85° latitude or below 1.4 Display Mode Plotter, Video pilot, Highway display, Waypoint display 1.5 Alarms...

Page 95 - INDEX; See

Index-1 INDEX A Alarm information window 8-4 ALARM key 8-1 Alarm messages 8-4 Alarms alarm information window 8-4 alarm message 8-4 anchor watch alarm 8-2 arrival alarm 8-1-8-2 audio alarm 8-1 DGPS alarm 10-7-10-8 proximity alarm 8-3 speed alarm 8-3 XTE alarm 8-2-8-3 Anchor watch alarm 8-2 Arrival a...

Page 96 - Memory card

INDEX Index-2 M Magnetic bearing 10-3 Magnetic variation 10-4 Maintenance 12-1 Mark color 4-3 number used 4-4 entering 4-1 erasing 4-4 line 4-3 displaying 4-4 shape 4-2 Memory card formatting 9-1 loading data 9-3 saving data 9-2 Memory clear 12-5 Memory, I/O port test 12-3 MENU key 1-5 Menu tree A-1...

Furuno GP-1850WD, GP-1850W - Manual

Table of Contents:

Summary

Other Furuno Models