Furuno GP-1610C - Manual
Furuno GP-1610C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Electrical shock can result.; Keep heater away from equipment.; WARNING; SAFETY INSTRUCTIONS
- Page 3 – Inserting a Chart Card; Open the chart card drive cover at the bottom of the display unit.; Insert chart card label side up, arrow forward.; Close the chart card drive cover.; To eject a chart card:; Open the chart card drive cover.; Note: If no chart card is inserted a general world map appears.
- Page 4 – Displaying the Plotter Picture
- Page 5 – Adjusting Tone and Brilliance; Press
- Page 6 – How to Use the Cursor
- Page 7 – Registering Your Harbor; Date and time of
- Page 8 – Setting Destination; Press the ZOOM OUT key.
- Page 9 – Own ship’s
- Page 10 – Sailing for Destination; Steer towards destination.
- Page 11 – Arriving at Destination; When nearing your destination, expand the range scale.; Press the ZOOM IN key.
- Page 12 – Entering Marks
- Page 13 – Changing Mark Shape, Color
- Page 15 – Returning to Harbor
- Page 16 – After arriving, press the
1
The purpose of this Operator's Guide is to provide the basic operating procedures for this
equipment. For more detailed information see the operator's manual.
Course bar
01
Position-fixing mode
Time
Position
CSE 350.0
°
SPD 16.8kt 2D
DEP 110 m
TMP 1 6 . 0
°
C 13:42
POS 34
°
26.345’N 135
°
41.232’E
Ship’s track
Waypoint
(Marks important
point (buoy, etc.);
can be set as
destination.)
Mark
(Marks point
of interest,
reef, etc.)
Chart
(Requires chart
card.)
Depth
(Requires
sensor.)
Course
Water temperature
(Requires sensor.)
Speed
Own ship mark
(Shows current
position.)
Sample plotter display
The GP-1610C is a fully integrated color video plotter and GPS receiver. To find position,
simply turn on the power. As your boat moves its track is inscribed on the display.
GP-1610C
Color GPS Plotter
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Do not disassemble or modify theequipment. Fire, electrical shock or serious injurycan result. Turn off the power immediately if waterleaks into the equipment or the equip-ment is emitting smoke or fire. Continued use of the equipment can causefire or electrical shock. Do not place liquid-filled c...
3 Inserting a Chart Card 1 Turn off the power. 2 Open the chart card drive cover at the bottom of the display unit. Screws Cover 3 Insert chart card label side up, arrow forward. EJECTbutton Chartcard Arrow forward 4 Close the chart card drive cover. To eject a chart card: 1 Open the chart card driv...
4 Displaying the Plotter Picture Press the POWER key to turn on the equipment. A beep sounds and shortly thereafter theplotter display appears. Results of self-test;displayed for aboutone second. Warning on chartcard usage; appearsfor about one minute. ACQ means acquiringsatellite; position isnot re...
