Page 2 - Preface
XG0224 Hardware Guide 2 Preface You have purchased the XG0224, a compact, 24 port 1 Gigabit Ethernet layer 2 switch that achieves unsurpassed standards of high throughput and low-latency performance. This manual explains the procedures required to install your XG0224 and should be read and understoo...
Page 3 - LICENSE AGREEMENT; Use and Copyright of the Software
XG0224 Hardware Guide 3 LICENSE AGREEMENT Thank you for purchasing the XG Series switch product ("Hardware") and accompanying software ("Software," together with Hardware, collectively, referred to as "Product") manufactured by Fujitsu Limited ("Fujitsu"). The use of ...
Page 4 - High Safety Required Use; FUJITSU LIMITED
XG0224 Hardware Guide 4 c. if in Fujitsu's sole judgment it is not commercially reasonable to perform either of the above options, subject to the limitation of liability set forth in subsection (2) above, Fujitsu shall pay for any damages Customer has incurred due to nonuse of the Software. 5) If th...
Page 5 - Contents; Chapter 1
XG0224 Hardware Guide Contents 5 Contents Preface ................................................................................................................................................................2LICENSE AGREEMENT ..........................................................................
Page 7 - Organization and Usage of This Manual; About This Manual; About the Symbols; Hint; Precautions; Warning
XG0224 Hardware Guide 7 Organization and Usage of This Manual This manual explains what you need to know before using this device. In addition, the README file on CD-ROM contains important information. You will also need to read the file. About This Manual This manual contains important information ...
Page 8 - Trademark Notification in This Manual; Abbreviated Product Names
XG0224 Hardware Guide 8 Trademark Notification in This Manual Microsoft, MS-DOS, Windows, Windows NT, Windows Server and Windows Vista are registered trademarks of the Microsoft Corporation in the USA and other countries. Adobe and Reader are trademarks or registered trademarks of Adobe Systems Inco...
Page 9 - How the Manuals for This Device Are Organized
XG0224 Hardware Guide 9 How the Manuals for This Device Are Organized The manuals for this device are organized as follows. Use these manuals as necessary. Manual Name Description Safety and Installation Guide This manual describes the safety and installation. XG0224 Hardware Guide (This manual) Thi...
Page 10 - Safety Precautions; About Warning Descriptions
XG0224 Hardware Guide 10 Safety Precautions About Warning Descriptions This manual contains precautions that must be taken in order to use this device safely and prevent personal injury or property damage. Please fully understand the meanings and contents of the following descriptions and symbols wh...
Page 12 - Caution
XG0224 Hardware Guide 12 Indicates that improper use can cause light or moderate injury. In addition, this symbol indicates a chance of damage to this device and other connected equipment. Cautions Do not touch this device for more than one minute while it is turned on.Failure to follow this may cau...
Page 14 - Safety; High Safety Required Applications
XG0224 Hardware Guide 14 Electromagnetic Compatibility (USA) FCC Part-15 Class A Electromagnetic Compatibility (CANADA) Industry Canada Interference-Causing Equipment Standard ICES-003 Class A. This Class A digital appartatus complies with Canadian ICES-003. Cet appareil numerique de la classe A est...
Page 15 - About Fujitsu's Green Products
XG0224 Hardware Guide 15 Laser Safety The XG0224 may be installed with optical transceiver modules (SFP and/or SFP+ modules), which emit invisible laser light. In the USA, these optical modules are certified as Class 1 laser products that conform to the requirements of the Department of Health and H...
Page 16 - Notes on Use
XG0224 Hardware Guide 16 Notes on Use Before using this device, please read the following. • Customers are required to store and maintain configuration information for the device, after the configuration is complete.The configuration information can be used by Fujitsu or Fujitsu’s certified support ...
Page 18 - Items in the Package, Descriptions and; Parts List
XG0224 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 18 1.1 Items in the Package, Descriptions and Functions Before proceeding, check all the items described below. 1.1.1 Parts List Please check that all of the following parts are included in the package. ...
Page 19 - Port Side
XG0224 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 19 1.1.2 Port Side • Console Port In order to set and operate the switch, use the console cable and D-SUB9pin cross cable included in this package to connect to the PC. Caution The RJ45 Console Port jack...
Page 20 - LED Details
XG0224 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 20 LED Details • Ready LED Indicates the operational state of the switch. • Error LED Indicates a compact flash mount/access error occurred. • PSU LED Indicates the switch power supply status. • Check LE...
Page 21 - LED Functions / Behaviors
XG0224 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 21 LED Functions / Behaviors *) During system POST, the Ready LED blinks green at a 0.5 second interval. When the switch is operating from the backup firmware image, the Ready LED blinks at a 1 second in...
Page 22 - Power Inlet Side
XG0224 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 22 1.1.3 Power Inlet Side • Power Inlet AC power inlet for the power cable provided. • Product Manufacturing Label This indicates the model name, serial number, manufacturing date and Class 1 Laser Produ...
Page 23 - Top Surface
XG0224 Hardware Guide Chapter 1 Getting Started Items in the Package, Descriptions and Functions 23 1.1.4 Top Surface • Warning Label This label describes the safety measures you should take when using this product. Warning Label
Page 24 - SFP Modules; Compact Flash
XG0224 Hardware Guide Chapter 1 Getting Started Options 24 1.2 Options 1.2.1 SFP Modules SFP modules (100BASE-FX/1000BASE-SX/1000BASE-LX/1000BASE-ZX/1000BASE-BX-D/1000BASE-BX-U) can be used. Precautions • Turn the switch power off to install a SFP module.• SFP modules can not be installed in the opt...
Page 25 - Expansion Card; LED Display Content
XG0224 Hardware Guide Chapter 1 Getting Started Options 25 1.2.4 Expansion Card The following describes the available expansion card options. The optional expansion card is installed in the expansion slot on the port side of the switch. The following details the functions/behaviors of each type of e...
Page 26 - CX4 Expansion Card
XG0224 Hardware Guide Chapter 1 Getting Started Options 26 CX4 Expansion Card • CX4 Link/Act LEDs Indicates CX4 port link status / communication status. • CX4 Ports Connect to 10G Ethernet NW equipment using CX4 cable. LED Display Content LED Name State Status CX4 Link/Act Green Link is established ...
Page 28 - Requirements for Installation; Installation Requirements; Temperature and Humidity Requirements; Power Requirements
XG0224 Hardware Guide Chapter 2 Installation Requirements for Installation Environment 28 2.1 Requirements for Installation Environment Before installing the switch, please check the following: • Make sure that the switch and all the other options shown in this document are available for installatio...
Page 29 - Installation Condition; Check List
XG0224 Hardware Guide Chapter 2 Installation Requirements for Installation Environment 29 Installation Condition Check List Check the following items. Check Item Check Result Nothing is put on the switch. Vents are not obstructed. The switch is not located on the table or not stuck on another switch...
Page 30 - Space Requirements; Ensuring the Space for Installation (Maintenance) of the Switch
XG0224 Hardware Guide Chapter 2 Installation Requirements for Installation Environment 30 2.1.2 Space Requirements When installing the switch and providing maintenance, ensure the space below is maintained. Ensuring the Space for Installation (Maintenance) of the Switch When installing the switch an...
Page 31 - Installation of the Switch; Installation on 19” Rack; Place the switch on the flat place.
XG0224 Hardware Guide Chapter 2 Installation Installation 31 2.2 Installation This section describes how to install the switch. 2.2.1 Installation of the Switch The following describes how to install. Installation on 19” Rack The switch can be installed and operated in the EIA standard 19” rack. Pre...
Page 33 - Installation of Extension Card; Installation of SFP+ Extension Card / CX4 Extension Card; Turn off the power of the switch.; Loosen the screws on the extension slot and remove the cover panel.; Firmly fix the extension card in the switch with the screw.
XG0224 Hardware Guide Chapter 2 Installation Installation 33 2.2.2 Installation of Extension Card The extension cards can be installed to the switch as optional. Below describes how to install each extension card. Installation of SFP+ Extension Card / CX4 Extension Card Below describes the case of S...
Page 34 - Removing SFP+ Extension Card / CX4 Extension Card
XG0224 Hardware Guide Chapter 2 Installation Installation 34 Removing SFP+ Extension Card / CX4 Extension Card 1. Turn off the power of the switch. Caution If the extension card is removed when the power is on, the Check LED will light up and the switch will go into trouble state. 2. Loosen the scre...
Page 35 - Connecting the Equipment; Discharging Twisted Pair Cable; Blow dust away with cleanly dry air or nitrogen.; Insert and slowly wheel a new cleaning stick, and dry the SFP module.
XG0224 Hardware Guide Chapter 2 Installation Connecting the Equipment 35 2.3 Connecting the Equipment We recommend discharging static electricity of twisted pair cable before connecting it to the switch. Also see below for how to install the compact flash card. 2.3.1 Discharging Twisted Pair Cable D...
Page 36 - Cleaning of Optical Connector; Take thumb holder off, and close a cap of a fiber cleaner.; Removal of Micro Dust; Wipe the optical fiber part with ethanol or cleaning fluid.
XG0224 Hardware Guide Chapter 2 Installation Connecting the Equipment 36 Cleaning of Optical Connector 1. Remove the connector guard cap of optical fiber part, and check the connector end face. If the end face is not clean, clean it with a reel type fiber cleaner. 2. Push thumb holder of a fiber cle...
Page 37 - Connecting Twisted Pair Cable
XG0224 Hardware Guide Chapter 2 Installation Connecting the Equipment 37 2.3.3 Connecting Twisted Pair Cable / SFP Module / SFP+ Module / CX4 Cable The following describes how to connect twisted pair cable, SFP module, SFP+ module, and CX4 cable. Use straight cable when connecting with routers and t...
Page 38 - Connecting SFP Module
XG0224 Hardware Guide Chapter 2 Installation Connecting the Equipment 38 Connecting SFP Module Firmly install SFP module to SFP slot and lock module to the switch. Caution Make sure to turn off the power when inserting and pulling out the SFP module. Precautions • Port 21 to 24 of 10/100/1000 BASE-T...
Page 39 - Connecting SFP+ Module
XG0224 Hardware Guide Chapter 2 Installation Connecting the Equipment 39 Connecting SFP+ Module Firmly install SFP+ module to SFP+ slot and lock module to the switch. Caution Make sure to turn off the power when inserting and pulling out the SFP+ module. Precautions • Safely keep a guard cap of SFP+...
Page 40 - Connecting CX4 Cable; Installing Compact Flash Card
XG0224 Hardware Guide Chapter 2 Installation Connecting the Equipment 40 Connecting CX4 Cable Firmly install CX4 cable to CX4 expansion card port and lock the cable. Precautions • Make sure to firmly insert the cable straight from behind.• When bending the cable, make sure that the diameter of the b...
Page 41 - Connecting to a Setup PC; Necessary Hardware / Software; Confirm power of both the PC and the switch are off.
XG0224 Hardware Guide Chapter 2 Installation Connecting to a Setup PC 41 2.4 Connecting to a Setup PC This is to connect a set up PC to the console port of the switch using RS232C cable. Necessary Hardware / Software Please prepare the hardware & software specified below to connect to the switch...
Page 42 - Turn on the Power; Connect the power cable to the electrical outlet.
XG0224 Hardware Guide Chapter 2 Installation Connecting to a Setup PC 42 Turn on the Power Caution • Please use the power cable included in this product. Also, please do NOT use this power cable on other products. • If the power outlet does not match with the power cable plug, please use the change ...
Page 43 - Prepare a Setup PC; Log on using the terminal software.; Start up the terminal software by using the set up PC.; Confirm “#” is shown on screen
XG0224 Hardware Guide Chapter 2 Installation Connecting to a Setup PC 43 Prepare a Setup PC Log on using the terminal software. 1. Start up the terminal software by using the set up PC. 2. Set the setting conditions to the following; Please refer to the terminal software manual for instructions on s...
Page 44 - Command
XG0224 Hardware Guide Chapter 2 Installation Time Setting 44 2.5 Time Setting Make sure to set up the time before you do other settings of the switch. The time is not set at the initial timing of purchase. Please refer below command for setting up time manually using console or telnet. z Command Whe...
Page 45 - Set up IP address
XG0224 Hardware Guide Chapter 2 Installation Set up IP address 45 2.6 Set up IP address Please set the IP address at times when it is required. Eg. When setting the switch through www browser or installing a firmware from the initial state of the purchase. The following commands show how to set up t...
Page 46 - Index; Number
XG0224 Hardware Guide Index 46 Index Number 10/100/1000BASE-T Port ........................................ 19 C CD-ROM .................................................................. 18Check LED ............................................................... 20Communication Software ...............
