Page 2 - DECLARATION OF CONFORMITY; We
2 DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (Euro) GmbH o f Werftstraße 20, D-40549 Düsseldorf, F. R. Germany Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanezawa Shinjyo-shiYamagata Japan declares under our sole responsibility that the product, Type: 42” PLASMA DISPL...
Page 3 - ENGLISH; FCC NOTICE; IMPORTANT INFORMATION; TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE; IMPORTANT SAFEGUARDS
3 ENGLISH FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment isoperated in a commercial environment...
Page 4 - SAFETY PRECAUTIONS
4 – This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. – This product is equipped with a three-wire plug. This plug will fit only into a grounded ...
Page 6 - FEATURES
6 VERTICAL INSTALLATION The dynamic vertical screen is obtained by installing the Plasmavision vertically. PLASMAVISION SUPPORTS The VGA full display and SVGA compression display suitable for personal computers A VARIETY OF INPUT TERMINALS The high quality image color difference signals such as DVD ...
Page 7 - Checking Accessories; Cable clampers; ACCESSORIES; C o n n e c t i n g t o E x t e r n a l E q u i p m e n t
7 ENGLISH Checking Accessories Cable clamper × 2 Power cord Remote controller × 1 AA battery × 2 User ’s Manual × 1 Bracket × 2 (2 type) Screw × 2 (2 type) Cable clampers • The accessory cable clampers are for fastening the connected signal cables and a power cable. When installing this display on a...
Page 8 - POINTS ABOUT USAGE; When desktop stand used; WHAT YOU SHOULD KNOW
8 POINTS ABOUT USAGE • When installing the display, use the optional desktop stand, wall-mounting unit, or ceiling mounting unit. Have the installation done by your product dealer. • When installing the display, refer to the installation manuals for the options. Further, be sure that the display doe...
Page 10 - A T TA C H I N G TO WA L L O R C O L U M N; A T TA C H I N G TO D E S K T O P S TA N D; PREVENTING EQUIPMENT FROM FALLING
1 0 To prevent accidents and to ensure safety during disasters such as earthquakes, take precautions to ensure that the equipment cannot topple over. A T TA C H I N G TO WA L L O R C O L U M N • Remove the display cover from both sides. Then, for both left and right sides, use screw A (10 mm) to att...
Page 11 - NAMES OF PARTS AND THEIR FUNCTIONS
1 1 ENGLISH Front view Bottom view NAMES OF PARTS AND THEIR FUNCTIONS Power lamp • Shows the power status, ON or OFF. • Lit (red)····Standby • Lit (green)····Power on • Blinking (red)····Internal abnormality. Be certain to unplug the power cord. Remote control receiver • Receives the signals from th...
Page 12 - Rear view
1 2 Power switch • When pressed, power lamp ➀ lights red, and the power can be turned on or off by the remote controller. When this switch is pressed again, the power is cut and power lamp ➀ goes off. Power input terminal • Firmly insert the accessory power cord as far as it will go into the power i...
Page 14 - Handling the remote controller; Reception range of remote controller
1 4 Handling the remote controller Loading the batteries Reception range of remote controller Points about usage • Use the remote controller pointed in the direction of the remote control reception section, making sure there is no obstruction. • The remote controller may not operate correctly in a r...
Page 15 - PREPARATION; Switch on the main power switch.; BASIC OPERATIONS; Press the POWER button.
1 5 ENGLISH PREPARATION Switch on the main power switch. Press the main POWER SWITCH at the rear. The power lamp lights (red). Press- ing this switch again switches off the power. BASIC OPERATIONS Mode display • COMP.VIDEO stands for component video mode. • When the speaker setting (see p.21) is OFF...
Page 16 - Press the WIDE button.; SWITCHING THE WIDE SCREEN AUTOMATICALLY
1 6 VIEWING WIDE SCREEN (VIDEO MODE) 1 Press the WIDE button. The current viewing mode is dis- played. 2 With the WIDE button,select AUTO mode. Pressing the WIDE button moves the mode to the next item as be- low. When AUTO is selected, the wide screen is automatically selected according to the conte...
Page 17 - S C R E E N S A S P E C T R AT I O
1 7 ENGLISH 1 Press the WIDE button. The current viewing mode is displayed. 2 Use the WIDE button to select the desired screen size. Pressing the WIDE button moves the mode to the next item as below. Select the wide screen size to suit the program. ∗ AUTO mode cannot be selected in COMPONENT VIDEO m...
Page 18 - SETTING THE DESIRED WIDE SCREEN SIZE
1 8 SETTING THE DESIRED WIDE SCREEN SIZE VIEWING WIDE SCREEN (RGB MODE) 1 Press the WIDE button. The current viewing mode is dis- played. 2 Use the WIDE button toselect the desired screensize. Pressing the WIDE button moves the mode to the next item as be- low. NORMAL WIDE Example: NORMAL Example: W...
Page 20 - ON-SCREEN DISPLAY SETTING; HANDY FUNCTIONS; Set the desired setting.
2 0 ON-SCREEN DISPLAY SETTING HANDY FUNCTIONS 1 S e l e c t C O M M O N S E T-T I N G S f r o m t h e V I D E OMENU screen. 1) Press the MENU button. 2) With the ADJUST button, select COMMON SETTINGS. 3) Set by pressing the SET button. COMMON SETTINGS can be set in the same way from any mode menu. 2...
Page 21 - INTERNAL SPEAKER SETTING; Select COMMON SETTINGS from the VIDEO MENU screen.; Select the adjustment item.; To complete adjustments
2 1 ENGLISH INTERNAL SPEAKER SETTING 1 Select COMMON SETTINGS from the VIDEO MENU screen. 1) Press the MENU button. 2) With the ADJUST button, select COMMON SETTINGS. 3) Set by pressing the SET button. COMMON SETTINGS can be set in the same way from any mode menu. 2 Select the adjustment item. With ...
Page 22 - WHITE BALANCE SETTING
2 2 WHITE BALANCE SETTING HANDY FUNCTIONS Example: When COMMON SETTINGS is selected Example: When WHITE BALANCE is selected Example: When 0 is selected ∗ To complete adjustments Press the MENU button to return to the VIDEO MENU. Pressing the MENU button returns the display to the previous screen and...
Page 23 - DPMS AND DISPLAY LANGUAGE SETTING; DPMS SETTING; L A N G U A G E ( D I S P L AY L A N G U A G E ) S E T T I N G; The language for the display can be set.
2 3 ENGLISH DPMS AND DISPLAY LANGUAGE SETTING LANGUAGE ENGLISH-A MENU RETURN SELECT SET NEXT DPMS SETTING The time until the power conservation function operates canbe set. Select with the ADJUST button. Pressing the ADJUST button moves the selection to the next item as below. L A N G U A G E ( D I ...
Page 24 - EXAMPLE: ADJUSTING THE BRIGHTNESS
2 4 EXAMPLE: ADJUSTING THE BRIGHTNESS VIDEO ADJUSTMENTS (VIDEO MODE) 1 Select PICTURE from theVIDEO MENU screen. 1) Press the MENU button. 2) With the ADJUST button, se- lect PICTURE. 3) Set by pressing the SET button. 2 S e l e c t t h e a d j u s t m e n titem. W i t h t h e S E T b u t t o n , s ...
Page 25 - VIDEO ADJUSTMENT ITEMS; BRIGHTNESS
2 5 ENGLISH VIDEO ADJUSTMENT ITEMS BRIGHTNESS Screen brightness can be adjusted. button: Makes the picture brighter. button: Makes the picture darker. CONTRAST Screen contrast (difference between dark and light) can be adjusted. button: Makes the contrast stronger. button: Makes the contrast weaker....
Page 27 - ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA); VERTICAL POSITION
2 7 ENGLISH ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA) VERTICAL POSITION When too low····Adjust with the button. When too high····Adjust with the button. HEIGHT When too small····Adjust with the button. When too large····Adjust with the button. HORIZONTAL POSITION When too far left:····Adjust with t...
Page 28 - EXAMPLE: SETTING COMPONENT VIDEO
2 8 EXAMPLE: SETTING COMPONENT VIDEO Setting must be done when connecting a color difference signal to theCOMPONENT VIDEO terminal. INPUT SOURCE ADJUSTMENTS (VIDEO MODE) 1 Select SOURCE from theVIDEO MENU screen. 1) I n C O M P O N E N T V I D E O mode, press the MENU but-ton. 2) With the ADJUST but...
Page 29 - SETTING VIDEO SYSTEM AND CLAMP PULSE; VIDEO SYSTEM
2 9 ENGLISH SETTING VIDEO SYSTEM AND CLAMP PULSE VIDEO SYSTEM VIDEO SYSTEM can be set when the signal is connected to the VIDEO or S-VIDEO input terminal. Set by adjusting to the connected signal. In VIDEO or S-VIDEO mode, press the MENU button to select SOURCE. Select with the ADJUST button. Pressi...
Page 30 - EXAMPLE: MAKING THE GAMMA SETTING; Select the desired picture.
3 0 EXAMPLE: MAKING THE GAMMA SETTING OTHER ADJUSTMENTS (VIDEO MODE) 1 Select OTHERS from theVIDEO MENU screen. 1) Press the MENU button. 2) With the ADJUST button, se- lect OTHERS. 3) Press the SET button to fix the OTHER setting. 2 S e l e c t t h e a d j u s t m e n titem. W i t h t h e S E T b u...
Page 31 - OTHER ADJUSTMENT ITEMS; GRADATION
3 1 ENGLISH OTHER ADJUSTMENT ITEMS GRADATION Gradation display can be selected to suit still or moving images. MODE1···· Carries out automatic correction so that the video is optimum for viewing moving images. MODE2···· Carries out automatic correction so that the video is optimum for viewing still ...
Page 32 - EXAMPLE: ADJUSTING THE CONTRAST
3 2 EXAMPLE: ADJUSTING THE CONTRAST VIDEO ADJUSTMENTS (RGB MODE) 1 Select PICTURE from theRGB MENU screen. 1) Press the MENU button. 2) With the ADJUST button, se- lect PICTURE. 3) Set by pressing the SET button. 2 S e l e c t t h e a d j u s t m e n titem. With the SET button, select CON- TRAST. Pr...
Page 36 - EXAMPLE: SETTING MACINTOSH MODE
3 6 1 Select SOURCE from theRGB MENU screen. 1) Press the MENU button. 2) With the ADJUST button, se- lect SOURCE. 3) Set by pressing the SET button. 2 S e l e c t t h e a d j u s t m e n titem. With the SET button, select MAC MODE. Pressing the SET button moves the selection to the next item as bel...
Page 37 - OTHER ADJUSTMENTS AND CHECK ITEMS; CLAMP PULSE
3 7 ENGLISH OTHER ADJUSTMENTS AND CHECK ITEMS CLAMP PULSE CLAMP PULSE must be set when the signal is connected to the RGB input terminal. This setting switches the phase of the clamp pulse. The ADJUST button can be adjusted in the range from 0 through 4. Select so tha optimum picture is attained. SI...
Page 38 - EXAMPLE: SETTING THE GRADATION
3 8 EXAMPLE: SETTING THE GRADATION OTHER ADJUSTMENTS (RGB MODE) 1 Select OTHERS from theRGB MENU screen. 1) Press the MENU button. 2) With the ADJUST button, select OTHERS. 3) Set by pressing the SET button. 2 S e l e c t t h e a d j u s t m e n titem. With the SET button, select GRA- DATION. Pressi...
Page 39 - OTHER ADJUSTMENT ITEMS (ADJUSTMENT CRITERIA); GAMMA
3 9 ENGLISH OTHER ADJUSTMENT ITEMS (ADJUSTMENT CRITERIA) GAMMA Dynamic GAMMA correction can be set. MOTION: Set for viewing moving images. STILL: Set for viewing still images. GRADATION Gradation can be set. MODE 1: Set for viewing moving images. MODE 2: Set for viewing still images. DOT CLOCK Depen...
Page 40 - PERSONAL COMPUTERS THAT CAN BE CONNECTED
4 0 PERSONAL COMPUTERS THAT CAN BE CONNECTED The Plasmavision is set at the factory with adjustment values for 11 types of signals. (See the table below.) When any of these signals is input, it is automatically discriminated. For these signals, the desired screen can be adjusted according to the ins...
Page 41 - OPTIONAL PRODUCTS; WARNING
4 1 ENGLISH OPTIONAL PRODUCTS • Wall-mounting unit (horizontal) For 0 ° installation angle P-42WB01-B For 5 ° installation angle P-42WB02-B For 10 ° installation angle P-42WB03-B For 15 ° installation angle P-42WB04-B • Wall-mounting unit (vertical) For 0 ° installation angle P-42WB50-B • Ceiling-mo...
Page 42 - SPECIFICATIONS
4 2 • Specifications and external appearance may be changed for the sake of improvement. Model name PDS4203W-H/PDS4203E-H Screen size 42 inches---92.0 cm (W) x 51.8 cm (H) x 105.6 cm (width across corners) Aspect ratio 16:9 Weight 38.5 kg External dimensions 103.5 (W) × 64.0 (H) × 15.0 (D) cm Power ...
Page 44 - BEFORE REQUESTING REPAIR; BEFORE CLEANING; Always unplug the power cord from the; CARE AND MAINTENANCE; Cleaning the screen
4 4 BEFORE REQUESTING REPAIR If you think a malfunction may have occurred, check the following items. When this happens Check • The power does not come on. • Is the power cord disconnected? • The picture dose not appear. • Is a cable to other equipment disconnected? • The remote controller does not ...
