Page 7 - Contents
S26361-K841-V150-1-5E19 English Contents Introduction ........................................................................................................................................ 1 Notational conventions .......................................................................................
Page 9 - Introduction
S26361-K841-V150-1-5E19 English - 1 Introduction Your new LCD (Liquid Crystal Display) monitor 4312 FA offers numerous features and functions, forexample: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim housing • height adjustment and ability to turn (...
Page 10 - Notational conventions; Safety
Colour monitor 4312 FA 2 - English S26361-K841-V150-1-5E19 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to text marked with this symbol. Failure to observe this warningendangers your life, destroys the device, or may lead...
Page 11 - Cleaning notes; Transport notes
Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 3 • Lay all cables so that nobody can stand on them or trip over them. When attaching the device,observe the relevant notes in the chapter " Connecting the monitor ". • No data transmission cable should be connected or disconnected dur...
Page 12 - Manufacturer’s notes; FCC Class B Compliance Statement
Colour monitor 4312 FA 4 - English S26361-K841-V150-1-5E19 Manufacturer’s notes Energy Star The Fujitsu Siemens LCD colour monitor 4312 FA is designed to conserveelectricity by dropping to less than 5 W when it goes into standby,suspend and OFF mode. With this new power management the 4312 FAqualifi...
Page 14 - Disposal and recycling; Checking the contents of the consignment
Colour monitor 4312 FA 6 - English S26361-K841-V150-1-5E19 Disposal and recycling This device has been manufactured to the highest possible degree from materials which can berecycled or disposed of in a manner that is not environmentally damaging.The device may be taken back after use to be recycled...
Page 15 - Installing an ergonomic video workstation
Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 7 Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor.Please observe the following advises when installing a video workstation. W ind ow edge of desk perm...
Page 16 - Height adjustment and ability to turn
Colour monitor 4312 FA 8 - English S26361-K841-V150-1-5E19 Height adjustment and ability to turn 3 2 1 You can conveniently adjust the height of your monitor by first removing the transport lock (1) andthen slightly lifting the display (2). In addition, you can also turn the display by 90° into the ...
Page 17 - Connecting the monitor
Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 9 Connecting the monitor See your system unit's operating manual for details of the connectors and interfaces on the systemunit. ! Please note the information provided in the " Safety " section in the chapter " Important notes "...
Page 18 - Operation of the monitor
Colour monitor 4312 FA 10 - English S26361-K841-V150-1-5E19 i If your system unit has two monitor ports ("onboard" screen controller and separategraphics card), the monitor port for the separate graphics card is usually active. Ê Plug the power adapter cable into the power connector (3) of t...
Page 19 - Switching the monitor on/off; Notes on power management
Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 11 Switching the monitor on/off The ON/OFF switch (2) is used for switching the monitor on and off. The power indicator (1) glows green when the monitor and system unit are switched on. The powerindicator glows green and flashes when the monit...
Page 20 - Basic monitor settings with the floppy disk supplied; Monitor settings using the OSD menu
Colour monitor 4312 FA 12 - English S26361-K841-V150-1-5E19 Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimallyadapted to the screen controller used and adjusted in accordance with your needs. Basic monitor settings with th...
Page 21 - Brightness
Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 13 Carry out auto-adjustment of the monitor for the current resolution With the AUTO button you can start the auto-adjustment for the current resolution. During the auto-adjustment the display Auto adjustment is shown. During auto-adjustment t...
Page 25 - Notes on ergonomic colour adjustment
Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 17 Locking menu items of OSD menu All menu items of the OSD menu except brightness and contrast can be locked to preventaccidental or unauthorised changes to the monitor settings. Ê Press the MENU button of the control panel for at least 5 sec...
Page 27 - Preset operating modes; Power supply plug
Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 19 VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (VideoElectronics Standard Association, Display Data Channel) is used as the communications interfacebetween the monitor and the P...
Page 28 - Trouble shooting
Colour monitor 4312 FA 20 - English S26361-K841-V150-1-5E19 Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 no pin 2 Video input green 10 Sync. ground 3 Video input blue 11 Ground 4 Ground 12 DDC-Data 5 DDC ground 13 H. sync 6 Red video ground 14 V. sync 7 Green video...