Fujitsu FI-4220C\C2 - Manual
Fujitsu FI-4220C\C2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Fujitsu SCSI Scanner Installation Procedures
- Page 3 – Drivers and Downloads
- Page 5 – Place scanner back in its normal position
- Page 6 – Many
Fujitsu SCSI Scanner Installation Procedures
Windows 95\98\98SE\ME\2000\XP
Rev051906A
Page 1 of 7
If you are installing the following models by means of the SCSI interface then use this
document.
SP10C
M3093GX\DG
Fi-4530C
Fi-5120C
SP15C
M3096GX
Fi-4640S
Fi-5220C
SP600C M3097G\G+\DG
M4097D
Fi-5530C
SP620C M3099G\GX\GH
Fi-4750C\L
Fi-5650C
SP3091DC
FI-4120C\C2
M4099D
Fi-5750C
SP3092DC
Fi-4220C\C2
Fi-4860C
Fi-5900C
SP93GX
Fi-4340C
Fi-4990C
If you are going to use the USB interface of a dual SCSI/USB model then use the USB scanner
installation guide. For Scansnap models please use the Scansnap installation guide.
Hardware requirements.
You will need a PC system that meets our recommended specifications, an appropriate SCSI
controller, and a SCSI cable (six foot recommended maximum). For recommended PC system
specifications and SCSI controllers please reference the
You may also need your Operating System Disk.
Step A: Installing the SCSI Host Adapter (Adaptec).
1. Shut down your PC and remove the case cover.
2. Locate a free PCI slot and remove the back plate if necessary.
3. Install the SCSI controller in an open PCI slot.
Make sure that the card is seated completely in the slot and secured in the frame
Warning!
Failure to secure the SCSI controller in the PC can result in damage to the
SCSI card, scanner, and/or your system.
4
.
Boot your PC without the scanner attached
.
Step B: Installing the SCSI drivers (Adaptec).
5. When the New Hardware wizard comes up, allow Windows to finish installing the
hardware files for the SCSI controller.
6. Then either install/update the ASPI drivers from the CD or go to
,
and click on the “search” tab.
7. For
Windows 95\98
or
ME
scroll down to the “Enter key word or quoted phrase” box
and type in
“aspi32”
.
8. Next scroll down to the drivers section, click on ASPI32 and follow the prompts to
download it your desktop or a new folder.
9. Afterwards go to that location and double click on the "aspi32.exe" icon and follow
the prompts.
10. When the message “ASPI is up to date” appears, reboot and go to the next step.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP Rev051906A Page 2 of 7 11. For Windows 2000 or XP scroll down to the “Enter key word or quoted phrase” box and type in “ aspi ”. 12. Next scroll down to the drivers section, click on ASPI_v470 or higher and follow the prompts...
Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP Rev051906A Page 3 of 7 Installing ScandAll 21. 16. Back to the Scanner Setup Menu and click on Software Utility - ScandAll 21 . 17. The ScandAll 21 installation wizard will appear. Click next and follow the prompts to complet...
Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP Rev051906A Page 5 of 7 Step E: Unlocking the shipping lock. If your model scanner does not have a flatbed then proceed to Step F. The flatbed model scanners typically include a lock on the flatbed designed to protect the scan...
