Page 2 - All Rights Reserved, Copyright
I Declaration of Conformity Model Number : FD-1000 ATseries Trade Name : Console Drawer Responsible party : FUJITSU COMPONENT AMERICA, INC. Address : 250 East Caribbean Drive, Sunnyvale,CA94089 Telephone number : (408) 745-4900 This device complies with Part 15 of the FCC Rules. Operation Is subject...
Page 4 - Contents
1 Contents PREFACE ...................................................................................................................................................... 2 Conventions .....................................................................................................................
Page 5 - Preface; Conventions; This symbol indicates the possibility of physical damage (to this; Packing List; KVM Switch Integrated Console Drawer; CAUTION
2 Preface Congratulations on your purchase of a server rack-mountable KVM Switch Integrated Console Drawer. Using this product will greatly improve the efficiency and server switching functionality of the workspace around your racks. Space that was used in previous layouts can now be used more freel...
Page 7 - Important Notices; Safety
4 Important Notices This chapter contains cautions that must be taken when operating the Console Drawer and information related to safety. Carefully read this chapter to use the Console Drawer correctly. Safety Precautions This device adheres to the safety regulations related to information processi...
Page 8 - Safety Instructions
5 ● Only licensed personal can uncouple, remove or switch parts (such as electro-magnetic wave devices) which bear a warning mark (such as a lightening bolt). ● Only the resolution and refresh rate specified in the monitor explanation in [Technical Specifications] can be used as incorrect settings m...
Page 9 - correctly they will not operate normally.; Disposal
6 ● When using a mouse with a scroll function such as a mouse with PS/2 wheel, scrolling outside of the support sometimes does not function properly. Also, the scroll mice may fail to function properly depending on the software used. ● The keyboard and mouse connectors are the same shape. Be sure th...
Page 10 - Installation; Installing the Guide Rails (when using a tapped guide rail)
7 Installation Please note the safety information in [Important Notices]. Maintain the area around the equipment when using the Console Drawer (See [Technical Specifications] for more information). Avoid dust, humidity and extreme temperatures. Installation may re-quire more than two people in some ...
Page 11 - Installing tapped guide rails diagram
Page 12 - Installing Console Drawer; Be careful that the latch lever; Installing the Console Drawer diagram
9 Installing Console Drawer Be careful that the latch lever ( see page 17) does not come loose. If the latch lever becomes loose, the Console Drawer may slide open. When installing the Console Drawer on the guide rails, make sure that at least two personnel are holding the Console Drawer. Do not con...
Page 13 - Names and Functions of Parts
1 0 Names and Functions of Parts ● Overview ● Console switches The five buttons and two LEDs on the monitor are explained in order from left to right. Power button: Push this button to turn on the power to the monitor. Also, pushing this button while the monitor is on cuts the power to the monitor. ...
Page 16 - Connecting and Removing Cables
1 3 Connecting and Removing Cables Read the Console Drawer manual before connecting the cables. Do not connect or remove the cables during a thunderstorm. When unplugging cables hold them by the plug, not the cable. Connect and remove cables in the following order. Connecting Cables ● Getting starte...
Page 17 - hook up a maximum of 64 servers.
1 4 5. In the case of a cascaded connection (when KVM Switch is connected in a two-level connection) By using cascaded connections (maximum 1 master and 8 slaves) it is possible to hook up a maximum of 64 servers. 1) Connect the master switch device's ports one through eight to the second level of s...
Page 18 - Removing Cables
1 5 Removing Cables Unplug the power cords, from the power outlets, of all the equipment that are effected, then remove each cable.
Page 19 - Operation; Operating the Console Drawer
1 6 Operation Pull the Console Drawer toward slowly until the slide rails lock. If they do not lock, the weight of the Console Drawer may cause it to move. Be careful not to pinch your hand when doing such activities as pulling or pushing the slide module and opening and closing the LCD. Operating t...
Page 21 - Adjusting the Monitor
1 8 Adjusting the Monitor The five buttons and two LEDs on the monitor are explained in order from left to right. Power button: Push this button to turn on the power to the monitor. Also, pushing this button while the monitor is on cuts the power to the monitor. Power lamp (green): This lamp lights ...
Page 22 - Basic Adjustment Procedure
1 9 Basic Adjustment Procedure 1. Push the menu button to open the menu. Example of menu screen display 2. Select the item to be adjusted with the ▼ button and the ▲ button. 3. Switch to the various adjustment screens with the button. 4. Change setting values with the ▼ button and the ▲ button. 5. A...
Page 24 - Resolution and Refresh Rate; Horizontal
2 1 Resolution and Refresh Rate Mode Resolution Horizontal frequency (KHz) Vertical frequency (Hz) 31.47 60.0 37.86 72.0 600 × 480 37.5 75.0 37.9 60.0 48.1 72.0 800 × 600 46.9 75.0 48.4 60.0 56.5 70.0 VESA 1024 × 768 60.0 75.0
Page 26 - Pointing Device Operation; The pointing device has been designed to be operated with one
2 3 Pointing Device Operation Lightly touch or tap the operation surface to operate the pointing device. Moving the pointer: Just lightly touch the operation surface in the direction you want to move the cursor. Single click: Lightly tap the operation surface once, or click the left button once. Dou...
Page 27 - Hot Key Mode B
2 4 Switching the Server A server can be selected from the OSD menu (Hot Key Mode). When a currently selected server is turned OFF, that state will be maintained. In this case, switch the desired server in the Hot Key Mode. Keyboard/mouse operations are enabled only on the server currently connected...
Page 28 - The mark shows the currently selected server.
2 5 1) OSD in a non-cascaded connection (Hot Key Mode A) (Different from actual server name display) 2) OSD screen in a cascaded connection (Hot Key Mode A) Example OSD Screen with cascaded channel selected [Screen Details] 1. Numbers 1 to 8 and function keys F1 to F8 (for a cascaded connection) ind...
Page 29 - Hot Key Mode; the switch is completed.
2 6 3) Changing the master/slave display when there is a cascaded connection (Hot Key Mode A) Cascade-connected master channel selected Slave channel selected [Screen Details] 1. If a cascade-connected master channel or any slave channel is selected, while the <Shift> key is pressed the OSD sc...
Page 31 - master side was made.
2 8 b. [Direct Switching Via Keyboard] 8-port KVM Switch 1) Use the number keys <1>~<8>. For a cascaded setup, first use the number keys <1>~<8> to select a master-side channel, then use the function keys <F1>~<F8> to select a slave-side port. 16-port KVM Switch 1...
Page 32 - Switching in Hot Key Mode B; twice and Hot Key Mode B is entered.
2 9 Switching in Hot Key Mode B The OSD menu is displayed at the top left of the screen when the <Ctrl> key is pressed twice and Hot Key Mode B is entered. (Press the <Ctrl> key quickly in succession.) When the text background is displayed in red, the screen is switched by pressing the k...
Page 33 - Console switches to the currently displayed screen; Setting/Changing Server Names; Changing a master-side name
3 0 <Enter> key: Console switches to the currently displayed screen <Esc> key: Console reverts to the server active before Auto Scan Mode was entered Setting/Changing Server Names Changing a master-side name Changing a slave-side name (Single KVM setup has no blue area) [Screen Details] ...
Page 34 - Constant Server Name Display Function; key twice will not cause the host name to be shown/hidden.
3 1 Constant Server Name Display Function When the device is operating in normal Console Mode, holding the <Shift> key down and pressing the <Scroll Lock> key twice causes the server name for the currently selected channel to be shown in the top-left of the screen. If the server name is ...
Page 35 - EDID Setting Mode
3 2 EDID Setting Mode After pressing the Hot-Key SW, the <Ctrl>+<Alt>+<Shift> keys or double pressing the <Scroll Lock> to activate the Hot Key Mode, pressing the <N> key causes the display to switch to the Customer Mode A: The top line accesses the EDID Setting Mode. T...
Page 36 - Storing Console Drawer; Push the monitor power button to turn off the power to the monitor.
3 3 The EDID Setting Mode may be ended as follows: Press the <P> key to return to the Server Selection screen. Press the <Esc> key to escape the Hot Key Mode and return to the normal console screen. EDID for 15" LCDs (Console Drawer) is set before the Console Drawer is shipped from t...
Page 37 - Inserting the slide module diagram; Cleaning Console Drawer; Wipe the Console; Drawer and monitor; with a dry cloth. If the dirt is excessive, wipe it off; the keyboard and pointing device; with a sterile cloth.
3 4 Inserting the slide module diagram Cleaning Console Drawer Turn off the power and unplug the power cable from the power socket. Do not use cleansers that contain abrasives; or such organic solvents as benzene or thinner; or disinfectant alcohol. Do not apply water and cleanser or spray type clea...
Page 38 - Technical Specifications; Item Specification
3 5 Technical Specifications Item Specification Product ID (KVM Switch Integrated Console Drawer) FD-1008AT FD-1016AT Number of Connected Servers Max. 8 (more if connections are cascaded) Max. 16 (more if connections are cascaded) Selection Method OSD Display (Hot Key Mode) Hot Key Mode Manual (key ...
Page 40 - Troubleshooting; Symptom
3 7 Troubleshooting Symptom Cause Action The AC cord is not connected to the electric outlet or to the switch device. Connect the AC cord. The AC power is off. Turn on the AC power. POWER button was turned OFF. Power lamp (green) is out. Turn POWER button ON. No monitor display No image signal from ...
Page 43 - Printed in Japan
KVM Switch Integrated Console Drawer [FD-10XXAT Series] User’s Manual Published Nov 2003 Published by FUJITSU COMPONENT LIMITED Printed in Japan ● The contents of this manual may be modified for improvements without prior notice. ● Fujitsu bears no responsibility for infringement of patent or othe...
Page 44 - This manual is made of recycled paper.
This manual is made of recycled paper. 031222 NC14004-L525 01
