Epson XP 6000 - Installation Manual

Start Here

4

Load paper

See the instructions below to load paper.

Output tray

Cassette 1

Cassette 2/
front cover

You can load the following paper sizes:

• Cassette 1: 3.5 × 5-, 4 × 6-, or 5 × 7-inch photo paper
• Cassette 2: Letter-, A4-, legal-size, or 8 × 10-inch paper

See the online User’s Guide for information about available
paper types and sizes, loading capacities, and printing on
CD/DVD/Blu-ray

®

discs.

1

Lower the front cover and raise the control panel.

2

Pull out a paper cassette.

Cassette 1

Cassette 2

3

Slide the side edge guides outward.

Cassette 1

Cassette 2

4

Insert the paper with the glossy or printable side
facedown.

Cassette 1

Cassette 2

Note:

Make sure the paper is loaded against the back of the

cassette and not sticking out from the front of the cassette.

Read these instructions before using your product.

Note for Spanish speakers/Nota para hispanohablantes:

Para

obtener instrucciones de configuración en español, consulte la

Guía

de instalación en

www.epson.com/support/xp6000sp (requiere

una

conexión a Internet).

1

Unpack

Protective
material

Note:

• Do not open ink cartridge packages until you are ready to install the

ink. Cartridges are vacuum packed to maintain reliability.

• Do not throw away the protective material shown above. Tape this

piece to the top of the ink cartridge holder when transporting your
product. For more information, see the online User’s Guide.

• The CD/DVD tray is stored underneath cassette 2.

1

Remove all protective materials from the product.

2

Lift up the scanner unit. Remove all protective materials
from inside the product.

3

Lower the scanner unit.

2

Turn on and configure

1

Connect the power cord to the back of the printer and to
an electrical outlet.

Caution:

Do not connect to your computer yet.

2

Turn on the product, then adjust the control panel.

3

Select your language.

Note:

• You can change this setting later using the product’s control

panel. For more information, see the online User’s Guide.

• If an error message appears, turn off the product and check

that no protective material has been left inside the product.

3

Install ink cartridges

1

Lift up the scanner unit.

Caution:

Do not touch the flat, white cable or the print head

path.

2

Gently shake the Black (BK) ink cartridge. Do not shake
the Photo Black (PB) or other ink cartridges.

3

Unpack the ink cartridges.

Caution:

Do not touch the areas shown below. Doing so may

prevent normal operation and printing.

4

Remove the cap from each ink cartridge.

Note:

Save the caps and use them to recap the ink cartridges

after removing them for storage or disposal.

5

Insert the cartridges at an angle in the holder for each
color. Press each cartridge down until it clicks.

6

Lower the scanner unit.

7

Select

Installed and press the OK button to start charging

the ink. Ink charging takes approximately 10 minutes.
When you see a completion message on the printer’s LCD
screen, charging is complete.

Caution:

Don’t turn off the printer or raise the scanner unit while

the printer is charging or you’ll waste ink.

Note:

• The printer is designed for use with Epson

®

cartridges only, not

third-party cartridges or ink.

• The cartridges included with the printer are designed for

printer set up and not for resale. After some ink is used for
charging, the rest is available for printing.

8

Follow the on-screen instructions to adjust the print
quality of your product.

Note:

• You need to load paper before you can adjust the print quality.

See “Load paper” below for details.

• Select

Adjust Later on the printer’s LCD screen if you want

to adjust the print quality later. For more information, see the
online User’s Guide.

XP-6000 Small-in-One

®

Printer

4135095 Rev.0

1-F

C

4135095 Rev.0

1-F

M

4135095 Rev.0

1-F

Y

4135095 Rev.0

1-F

K