Emerson LF501EM5F - User Manual

1 Notice EMERSON and the G-CLEF logo are registered trademarks of Emerson Radio Corp. in the U.S. and Canada, used under license   by Funai Electric Co., Ltd. and Funai Corporation, Inc. Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordin...

2 Important Positioning the TV • Large screen TVs are heavy. 2 people are required to carr y and handle a large screen TV. • Make sure to hold the upper and bottom frames of the Unit firmly as illustrated. • Install the Unit in a horizontal and stable position. • Do not install the Unit in direct su...

3 Getting Started Features ● DTV / Analog TV / CATV You can use your Remote Control to select channels which are Broadcast in Digital format and conventional Analog format. Also, Cable and Satellite subscribers can access their TV channels. ● Information display You can display on the TV screen the ...

Stand Assembly × 4 Attaching the Base You must attach the base to the Unit to have it as a table top Unit.Be sure the front and rear of the base match the proper direction. Forlarge screen TVs, at least 2 people are required for these steps. 1 2 × 4 Note(s) ● Make sure to use a table which can suppo...

Remote Control a j l mn k d f h e g b i c a B (POWER) Turns the TV On from Standby or Off to Standby. b PIC/SOUND MODE Optimizes Picture and Sound quality. c FREEZE Freezes Screen image for 5 minutes. d 0 - 9 (NUMBER keys) Used to enter a Channel / Program number. • (DOT) : Use with 0-9 to select Di...

Control Panel e d c b a f g h * When seen from the front. * Keys on Rear.Control Keys are located on the Rear side of the TV a VOL J / K Adjusts the Volume. VOL J : Volume Down VOL K : Volume Up In the Menu screen, moves the Cursor Left ( J ) / Right ( K ). b CH H / I Selects a Channel in the Memori...

Connecting the Antenna, Cable or Satellite Be sure your Antenna or another Device is connected properly beforeplugging in the AC Power Cord. If connecting to an Antenna through an RF cable Any DTV Programs that are Broadcast in your area can be received forfree through an Antenna Connection. RF cabl...

Plugging in the AC Power Cord Make sure All the Necessary Connections are made before the AC PowerCord is plugged into an AC outlet. Caution(s) ● Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltageof this Unit (120V AC). ● Connecting the AC Power Cord to a Power Supp...

Connecting your Devices HDMI Digital Connection HDMI Connection offers the Highest Picture quality.HDMI (High-Definition Multimedia Interface) transports high definitionDigital Video and multi-channel Digital Audio through a single cable. IN IN IN OUT OUT OUT HD game console or Blu-ray Disc/DVD Play...

PC Connection HDMI Connection This Unit can be connected to your PC that has an HDMI terminal.Use an HDMI cable for this Digital Connection. IN IN IN OUT PC HDMI cable HDMI cable HDMI cable HDMI-DVI Connection This Unit can be connected to your PC that has a DVI Terminal.Use an HDMI-DVI Conversion C...

These Operations are accessible by Remote Control. Some may also be accessible by the Main Unit's Control Panel. Initial Setup This section will guide you through the Unit’s Initial setting which includesselecting a Language for your On-screen Menu and Autoprogram, whichAutomatically scans and memor...

4 Use your TV Switching on your TV and putting it in Standbymode * Key on Rear Remote Control TV To Turn the TV On from Standby or Off to Standby ● Press B on the Rear panel or the Remote Control. Note(s) ● Energy Consumption contributes to air and water pollution. When the AC Power Cordis plugged i...

Watching Channels from an External Device Switching Each Input Mode can easily switch with the Remote Controlbetween TV (DTV or Analog TV) and External Devices when they areconnected to the Unit. 1 Turn On the Set-top Box or the Connected Device. ● The picture from the Set-top Box or the Connected D...

Changing Picture Format Display Modes can be Selected when your TV receives a 16:9 or 4:3 VideoSignal.Three types of Display Modes can be Selected for a PC Input Signal.Press PICTURE SIZE A Repeatedly to Switch the TV Aspect Ratio. For 16:9 Video signal Full can also be selected after Wide if an HDM...

TV Screen information You can display the currently selected channel or other information suchas the aspect ratio on the TV screen.In the Digital mode, the detailed broadcasting information for the currentoff the air channel, such as Program title, are displayed. 1 Press INFO . Digital TV Operation ...

5 Making more use with your TV This section describes the overview of the Main Menu displayed whenyou press MENU . The Main Menu consists of the function setting items below. Displaying the Main Menu1 Press MENU to display the Main Menu. 18503030 02 USB Language Features Setup Sound Picture Personal...

Picture Before you begin: You must set Home in Location . L p. 30 Otherwise, personalized Picture and Sound settings will not bememorized after the Unit goes into Standby Mode. 1 Press MENU and use H I to select Picture , then press OK . 18503030 02 USB Language Features Setup Sound Picture Personal...

Sound Before you begin: You must set Location to Home . L p. 30 Otherwise, personalized Picture and Sound settings will not bememorized after the Unit goes into Standby Mode. 1 Press MENU and use H I to select Sound , then press OK . USB Language Features Setup Sound Picture Stereo Multichannel On O...

Setup Before you begin: Make sure the Unit is connected to Antenna or Cable. 1 Press MENU and use H I to select Setup , then press OK . Antenna Add channels Channel list Autoprogram USB Language Features Setup Sound Picture 2 Adjust the following items. Autoprogram Be sure the RF cable is correctly ...

Add channels This function lets you add the off the air Analog TV or Analog Cablechannels that were not added by the Autoprogram due to receptionconditions during the Initial Setting. 1 Use H I to select Add channels , then press OK . 2 Use the NUMBER keys to enter the number of the channel you want...

Child and Ratings Lock You can prevent your children from watching certain Programs or certainChannels by locking the TV Controls and by using Ratings. 1 Use H I to select Child lock , then press OK . - - Home Software upgrade E-sticker Location fun-Link (HDMI CEC) PC settings Child lock Caption set...

Setting US Movie and TV Ratings US Movie Ratings Lock is the Rating System created by MPAA.US TV Ratings Lock has Controlled Access to Individual Programs basedon their Age and Content rating. 3 Use H I to Select US movie ratings lock or US TV ratings lock , then press OK . 4 Use H I to Select the D...

Canadian English or Canadian French Ratings You can select the Rating for Canadian English or Canadian Frenchbroadcasting. 3 Use H I to Select Canadian English rating or Canadian French rating , then press OK . 4 Use H I to Select the Desired Rating, then press OK Repeatedly to Switch between Block ...

fun-Link (HDMI CEC) This function allows you to operate the linked functions between ourbrand Devices with a fun-Link feature and this Unit connecting throughan HDMI cable. You must connect this Unit to our brand fun-Link devicesand be sure it's fun-Link (HDMI CEC) setting is also set to On. 1 Use H...

Setting your Location to Home You can set the Location of your TV to Home or Retail . Choosing Home gives you full flexibility to change predefined settings for Picture andSound. 1 Use H I to Select Location , then press OK . - - Home Software upgrade E-sticker Location fun-Link (HDMI CEC) PC settin...

6 Upgrade your TV Software Emerson continuously tries to improve its products and we stronglyrecommend that you Upgrade the TV Software when Upgrades areavailable.New Software can be Downloaded from our website at http://emersonaudiovideo.com/support/download using the model number of your TV to fin...

7 Useful tips FAQ Question Answer My Remote Control doesnot work.What should I do? ● Check the Antenna or Cable Connection to the Main Unit. ● Check the Batteries on the Remote Control. ● Re-insert the Batteries with their Polarities (+/–) as indicated. ● Check if there is an obstacle between the in...

Troubleshooting If the Unit does not perform properly when operated as instructed in this Owner’s Manual, check the following Troubleshooting Tips and All Connections Once before calling for Service. Power No Power ● Make sure the AC Power Cord is plugged in. ● Make sure that the AC outlet supplies ...

8 Information Glossary Analog TV (NTSC) Acronym that stands for National Television Systems Committee and thename of Analog broadcasting standards.Off the air Analog TV signals are no longer being sent by majorbroadcasting stations in the USA. Aspect ratio The width of a TV screen relative to its he...

9 Specifications Model # LF501EM5F Picture Type FHD (1920 x 1080 pixels 60Hz) Aspect Ratio 16:9 Viewing Angles 176° (V) by 176° (H) Built-in Digital / Analog Tuner ATSC (Digital) / NTSC (Analog) Sound Mono / Stereo Mono, Stereo, Virtual surround sound Power Output (RMS watts) 10W x 2 Equalizer 5 Ban...

10 Warranty WARRANTY COVERAGE:This warranty obligation is limited to the terms as set forth below. WHO IS COVERED:This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purc...