Emerson 1F85-0422- User Manual
Emerson 1F85-0422– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Remove Old Thermostat; WIRING CONNECTIONS
- Page 3 – THERMOSTAT QUICK REFERENCE; Set; Change; ” indicates; Home Screen Description
- Page 4 – INSTALLER/CONFIGURATION MENU; On
- Page 6 – OPERATING YOUR THERMOSTAT; Choose the System Setting
- Page 7 – Set Current Time and Date; Enter the Heating Program; PROGRAMMING (For Programmable Model Only); Energy Saving ENERGY STAR
- Page 8 – Planning Your Program – Important
- Page 9 – TROUBLESHOOTING; Reset Operation; Symptom
- Page 10 – NOTES
1
Blue Universal Thermostat with
Automatic Heat/Cool Changeover Option
Single Stage, Multi-Stage or Heat Pump
Installation and Operating Instructions for Models:
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING
THIS CONTROL COULD CAUSE PERSONAL INJURY
AND/OR PROPERTY DAMAGE.
Save these instructions for future use!
APPLICATIONS
www.white-rodgers.com
www.emersonclimate.com
1F83-0422 Thermostat
Model
Programming Choices
1F85-0422
5/1/1 Day 5/2 Day
Non-Programmable
1F83-0422
Non-Programmable
THERMOSTAT APPLICATION GUIDE
Description
Heat Pump (No Aux. or Emergency Heat)
Yes
Heat Pump (with Aux. or Emergency Heat)
Yes
Systems with up to 2 Stages Heat, 2 Stages Cool
Yes
Heat Only Systems (with optional fan switch)
Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces
Yes
Cool Only Systems
Yes
Gas or Oil Heat
Yes
Electric Furnace
Yes
Hydronic (Hot Water) Zone Heat – 2 Wires
Yes
Hydronic (Hot Water) Zone Heat – 3 Wires
Yes
PART NO. 37-7136A
1007
SPECIFICATIONS
Electrical Rating:
Battery Power .................................................... mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire ................................................... 20 to 30 VAC
Terminal Load ........................................................... 1.5 A per terminal, 2.5A maximum all terminals combined
Setpoint Range ......................................................... 45° to 90°F (7° to 32°C)
Differential (Single Stage) ......................................... Heat 0.6°F; Cool 1.2°F (adjustable)
Differential (Heat Pump) ........................................... Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient .................................................... 32° to +105°F (0° to +41°C)
Operating Humidity ................................................... 90% non-condensing max.
Shipping Temperature Range ................................... -4° to +150°F (-20° to +65°C)
Dimensions Thermostat ............................................ 3-7/8”H x 5-1/8”W x 1-1/4”D
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this
product may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For
proper disposal of a product containing mercury or a
sealed container of spilled mercury, place it in a suitable
shipping container. Refer to
www.white-rodgers.com
for
location to send product containing mercury.
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
Index
Page
Installation
2
Wiring Connections
2
Thermostat Quick Reference
3
Installer Configuration Menu
4
Operating Your Thermostat
6
Programming
7
Troubleshooting
8
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Emerson 1F85-0422
Summary
2 INSTALLATION Thermostat installation and all components of the control system shall conform to Class II circuits per the NEC code. WARNING ! Remove Old Thermostat A standard heat/cool thermostat consists of three basic parts:1) The cover, which may be either a snap-on or hinge type.2) The base, wh...
3 THERMOSTAT QUICK REFERENCE Set SYSTEM Heat FAN Auto Menu RoomTemperature SettingTemperature SystemIndicator FanIndicator Displays the power level ofthe 2 “AA” batteries: indicates good power level indicates batteries at about half power. “ Change ” indicates batteries are low and should be replace...
4 INSTALLER/CONFIGURATION MENU With thermostat in Heat, Cool or Auto, in normal operation, press the Menu button for at least 5 seconds. The display will show item #1 in the table below. Press Menu to advance to the next menu, Press or to change an item option. Shaded items are not available to 1F86...
