Emerson 16E09-101- User Manual
Emerson 16E09-101– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Circuit Board; Refrigeration; INSTALLATION
- Page 3 – WIRING; Wiring Instruction Notes; Fig. 4 Line Voltage Application; Fig. 3 Line Voltage Application
- Page 4 – USER MENU
- Page 5 – HEAT
- Page 6 – OPERATION; Temperature out of range; Multiple Sensors; NOTE; SPECIAL
- Page 7 – SPECIFICATIONS
- Page 8 – Display indicates “CaL” on power up.; Control was not calibrated. Return control for replacement.; TROUBLESHOOTING; Temperature differential is wider than set:
- Page 9 – odger; SOLUCIÓN DE PROBLEMAS
- Page 10 – ESPECIFICACIONES
- Page 11 – Varios sensores; FUNCIONAMIENTO; Entrada binaria (bIn) y Reducción de la; NOT
- Page 13 – MENÚ DEL USUARIO
- Page 14 – CONEXIONES ELÉCTRICAS; Notas de instrucciones de conexión eléctrica; aplicaciones como se indica a continuación:; Fig. 3 Aplicación de voltaje de línea; Fig. 5 Aplicaciones de 24 VC; * NTC – Coeficiente de temperatura negativo
- Page 15 – INST ALACIÓN; Fig. 1 Vista frontal del control y descripción; El control ofrece al usuario una opción para definir la tem
- Page 16 – Control electrónico universal de temperatura; INSTRUCCIONES DE; DESCRIPCIÓN; (coeficiente de temperatura negativo) y puede usarse con; CONTENIDOS; Especificaciones
CONTENTS
Basic Description ........................................................ 1
Precautions ................................................................. 1
Installation ................................................................... 2
Wiring .......................................................................... 3
User Menu .................................................................. 4
Operation .................................................................... 5
Specifications .............................................................. 7
Troubleshooting ........................................................... 8
www.white-rodgers.com
www.emerson.com
PRECAUTIONS
16E09-101
Universal Electronic Temperature Control
PART NO. 37-6857G
Replaces 37-6857F
1016
INSTALLATION AND
OPERATION INSTRUCTIONS
DESCRIPTION
The 16E09-101 is a single stage electronic temperature con-
trol, with a Nema 1 rated enclosure, and can be used for most
applications within the temperature control range of -40° to
220°F, (-40° to 104°C). The control has an SPDT (Single Pole
Double Throw) output load relay.
The control has user options to control differential, anti-short
cycle delay, set back, offset, alarms and more. It includes an
NTC (Negative Temperature Coefficient) thermistor tempera-
ture sensor, and can be used with certain other NTC or PTC
(Positive Temperature Coefficient) thermistors that meet the
specified resistance vs. temperature specifications. See the
tables on page 7.
The control can fit many applications, which range from
refrigeration to heating due to the wide temperature range of
the control stated above. Typical applications include walk-
in freezers, beverage coolers, supermarket display cases
for flowers, produce, meats, convenience store refrigerated
cases, food warmers, boiler control, and certain industrial
applications.
Save these instructions for future use!
WARNING
!
16E09-101 Optional Accessories / Service Items:
Immerson Well .................................................... F89-0286
Replacement 7.5' NTC Remote Sensor .............. F136-0114
Well Heat Transfer Compound ............................. F145-0163
•
Failure to read and follow all instructions carefully before
installing or operating this control could cause personal
injury and/or property damage.
•
To prevent electrical shock, personal injury and/or
equipment damage, disconnect electric power to system
at main fuse or circuit breaker box prior to installation
or service.
•
To prevent scald injury, do not use this control to
heat water for bathing, washing, hot tub or similar
applications.
•
Where failure of this control may result in personal
injury and/or property damage, additional alarms or limit
controls must be installed.
•
This control is a temperature control and is not to be
used as a temperature limit control.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Emerson 16E09-101
Summary
2 Fig. 1 Control Front View and Description Fig. 2 Control Dimensions and Mounting Information FRONT VIEW BOTTOM VIEW RIGHT SIDE VIEW REAR VIEW 6.73 ” 2.8 ” .76 ” 5.59 ” .85 ” 2.54 ” 1.54 ” 2.91 ” 4.19 ” 1.58 ” LEFT SIDE VIEW .85 ” 5.59 ” The control has a user selection for changing the setpoint to...
3 WIRING Wiring Instruction Notes Switch Settings Switch SW2 must be set for applications as shown: SW2 Line Voltage (Power Stealing) PS Line Voltage (Non Power Stealing) Non PS 24 VAC (Non Power Stealing) Non PS Fig. 4 Line Voltage Application (Non-Power Stealing) SW2 PTC BIN GND ALAR M NTC PS NC N...
4 USER MENU OPERATION SETTINGS: The control has user Menu settings that will determine how the control operates. The unit is shipped with factory de-fault settings. The user must change any of the settings as required for the application. To reset all settings to factory defaults, press and hold all...
