Page 2 - Visit our website for:; CUSTOMER CARE AND SERVICE; Always use original spare parts.
CONTENTS 1. SAFETY INFORMATION....................................................................................3 2. SAFETY INSTRUCTIONS.................................................................................. 4 3. PRODUCT DESCRIPTION..........................................................
Page 3 - SAFETY INFORMATION
General information and tips Environmental information Subject to change without notice. 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect i...
Page 4 - SAFETY INSTRUCTIONS
– farm houses; staff kitchen areas in shops, offices and other working environments; – by clients in hotels, motels, bed & breakfast and other residential type environments. • Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be between ...
Page 5 - Electrical connection
• Follow the installation instructions supplied with the appliance. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Do not install or use the appliance where the temperature is less than 0 °C. • Install the appliance in a safe and suitab...
Page 6 - PRODUCT DESCRIPTION
consequences and might void the guarantee. • Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information abo...
Page 7 - Indicator
The Beam-on-Floor is off when the appliance is deactivated. 4. CONTROL PANEL 1 2 3 4 5 6 1 On/Off button / Reset button 2 Delay Start button 3 Display 4 MY TIME selection bar 5 EXTRAS buttons 6 AUTO Sense program button 4.1 Display A C B B A. ECOMETER B. Indicators C. Time indicator 4.2 ECOMETER The...
Page 8 - PROGRAMME SELECTION; A. • Quick is the shortest programme; SprayZone
5. PROGRAMME SELECTION 5.1 MY TIME Using MY TIME selection bar, you can select a suitable wash cycle based on programme duration. C A B D E A. • Quick is the shortest programme (30min) suitable for washing a load with fresh and light soil. • Pre-rinse (15min) is a programme for rinsing off food rema...
Page 9 - Programmes overview
5.4 Programmes overview Programme Dishwasher load Degree of soil Programme phases EXTRAS Quick Crockery, cutlery Fresh • Dishwashing 50 °C • Intermediate rinse • Final rinse 50 °C• AirDry 1) • ExtraPower • GlassCare • SprayZone Pre-rinse All All • Prewash Not applicable 1h Crockery, cutlery Fresh, l...
Page 10 - Consumption values; Programme; Information for test institutes; Settings
Consumption values Programme 1) 2) Water (l) Energy (kWh) Duration (min) Quick 10.4 0.61 30 Pre-rinse 4.7 0.01 15 1h 12.6 0.92 60 1h 30min 13.1 1.07 90 2h 40min 12.5 1.13 160 ECO 12.2 0.665 180 AUTO Sense 12.5 1.15 170 Machine Care 11.4 0.87 60 1) The pressure and the temperature of the water, the v...
Page 11 - How to navigate in setting; Use Previous or Next to select the
No Settings Values Description 1) 5 Latest pro‐ gramme selec‐ tion On Off (default) Enable or disable the automatic selection of the most recently used programme and options. 1) For more details, refer to the information provided in this chapter. You can change the basic settings in setting mode.Whe...
Page 12 - Start the Quick programme to
6.2 The rinse aid level The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. It is possible to set the released quantity of rinse aid.When rinse aid chamber is empty, the rinse aid indicator is on notifying to refill rinse aid. If...
Page 13 - How to fill the rinse aid; dispenser; Remove the spilled rinse aid with an; Fill the rinse aid dispenser if it is; Using the detergent; If the programme has a prewash
detergent and do not put dishes in the baskets. 7.1 How to fill the rinse aid dispenser A B C CAUTION! The compartment (B) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the...
Page 14 - How to select and start a; programme using MY TIME; How to select and start the; programme Pre-rinse; How to activate EXTRAS; How to start the AUTO; Sense program; How to delay the start of a; programme
The upper ends of the two vertical ribs inside the compartment (B) indicate the maximum level for filling the dispenser with gel (max. 30ml). 8.2 How to select and start a programme using MY TIME selection bar 1. Slide your finger across MY TIME selection bar to choose a suitable programme. • The li...
Page 15 - appliance operates
8.7 How to cancel the delay start while the countdown operates Press and hold for about 3 seconds. The appliance returns to the programme selection. If you cancel the delay start, you have to select the programme again. 8.8 How to cancel a running programme Press and hold for about 3 seconds. The ap...
Page 16 - Unloading the baskets; First remove items from the lower; CARE AND CLEANING; How to start the Machine Care
9.3 Loading the baskets • Always use the whole space of the baskets. • Use the appliance to wash dishwasher-safe items only. • Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper as they could crack, warp, get discoloured or pitted. • Do not wash in the appliance item...
Page 17 - Use a descaler or a cleaning product; Press and hold simultaneously; Close the appliance door to start the; Internal cleaning
1. Use a descaler or a cleaning product designed specifically for dishwashers. Follow the instructions on the packaging. Do not put dishes in the baskets. 2. Press and hold simultaneously and for about 3 seconds. The indicators and flash. The display shows the programme duration. 3. Close the applia...
Page 18 - Make sure that there are no residues; Cleaning the lower spray; arm; Wash the spray arm under running; To install the spray arm back, press it
5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwi...
Page 19 - Cleaning the upper spray; To detach the spray arm from the; Cleaning the ceiling spray; Release the stoppers on the sides of
10.6 Cleaning the upper spray arm We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes.Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To detach the spray arm from the basket, press the spray arm upwards and simultaneous...
Page 22 - The product number code; Press and hold simultaneously; The dishwashing and drying results are not satisfactory; Problem
Problem and alarm code Possible cause and solutionThe appliance trips the cir‐ cuit-beaker. • The amperage is insufficient to supply simultaneous‐ ly all the appliances in use. Check the socket amper‐ age and the capacity of the meter or turn off one of the appliances in use. • Internal electrical f...
Page 24 - TECHNICAL INFORMATION
Problem Possible cause and solution Dull, discoloured or chipped tableware. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket carefully. Refer to the basket loading leaflet. • Place delicate items in the upper basket. • Activate the GlassCare optio...
Page 25 - Adjusting the height of the; To adjust the front height, turn the 2; Adjusting the level of the; appliance; Water inlet hose
13. INSTALLATION If floor is not level, adjustlevelling legs to suit The hose should not beextended by more than2 metres or water pump-out problems ma y occur Remove entire plasticmembrane from sink trapspigot & fit drain hose to spigotwith clamp There should be a minimum2mm gap between the top ...
Page 26 - Water drain hose
Inlet water supply • Water pressure: 1000 kPa max - 50 kPa min. • Water flow rate 10 L / minute min. • If water pressure is in excess of 1000 kPa, a pressure reducing valve should be used. Check for leaks. • If water temperature is in excess of 60° C, a tempering valve should be used. Check for leak...
Page 29 - ENVIRONMENTAL CONCERNS
EDish_Warr_Jul19 15. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with t...
