Electrolux ESF 4120 - Manual

Filling with salt Only use salt specifically designed for use indishwashers.All other types of salt not specifically designed for use ina dishwasher, especially table salt, will damage the watersoftener.Only fill with salt just before starting one of the completewashing programmes. This will prevent...

4. Press the Normal 65° push button again, the "end of programme" indicator light turns off, this means that the rinse aid indicator light has been deactivated. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off push button. To reactivate the rinse aid indicator l...

Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through thebaskets. Open the door and slide out the baskets to load the dishes. The lower basket ...

* Ideal for washing a complete load of 9 place settings with normal soil. Characterised by a duration of about 80 minutes and a washing temperature of 70°C. The time value is approximate and depends on the pressure and the temperature of the water and also by the variations of the power supply. ** I...

1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the On/Off push button The On/Off indicator light will come on. 3. Check that there is rinse aid and salt The corresponding indicator lights will illuminate if refilling is necessary...

Internal cleaning Ensure that the seals around the door, the detergent and rinseaid dispensers are cleaned regularly with a damp cloth.We recommend every 3 months to run a 65°C washprogramme without dishes using detergent. Cleaning the filters The filters in the base of the washing compartment are t...

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.The dishwasher will not start or stops during op...

If after all these checks, the problem persists, contact yourlocal Service Force Centre, quoting the model and serialnumber. This information can be found on the rating plate located onthe right hand side of the dishwasher door (see picture). Service and spare parts This product should be serviced b...

Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person.Any plumbing work required to install this applianceshould be carried out by a qualified plumber or competentperson.Remove all packaging before positioning the machine.If possibl...

Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under aclose fitting sink unit or a pre-existing top, providing thedimensions of the recess correspond to those shown in thepicture. Proceed as follows: - Remove the machine’s worktop by unscrewin...