Page 2 - Visit our website for:; CUSTOMER CARE AND SERVICE
CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . . . . . . . . . ...
Page 3 - SAFETY INSTRUCTIONS; Children and vulnerable
1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...
Page 5 - PRODUCT DESCRIPTION
2. PRODUCT DESCRIPTION 1 2 3 4 5 8 6 7 12 9 10 11 1 Worktop 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Air vent 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket ENGLISH 5
Page 6 - CONTROL PANEL; Indicators; Salt indicator. It is always off while the program operates.
3. CONTROL PANEL Rinse & Hold Hygiene Save MyFavourite 3 sec Multitab AutoFlex 45º-70º 55º 1 Hour Intensive 70º 50º Auto Off Quick Plus 60º FlexiWash 50º-65º 1 2 3 6 7 4 5 8 9 13 14 11 10 12 1 On/off button 2 Program touchpad 3 MyFavourite touchpad 4 Program indicators 5 Indicators 6 Delay touch...
Page 7 - Program bar; Start and progress of the program
3.1 Program bar The program bar shows you informationthat is related to the program and to theoption TimeSaver. Start and progress of the program When the program starts, the 2 lateral segments ofthe program bar flash. As the program is in progress, the middle seg-ments come on with fixed light, whi...
Page 8 - PROGRAMS; Program
4. PROGRAMS Program Degree of soilType of load Programphases Options 1) Normal soilCrockery and cut-lery PrewashWash 50 °CRinsesDry TimeSaverHygiene 2) EnergySaver 2) Multitab 3) AllCrockery, cutlery,pots and pans PrewashWash from 45 °C to70 °CRinsesDry Hygiene 2) EnergySaver 2) Multitab 4) Mixed so...
Page 9 - Information for test institutes
Consumption values Program 1) Duration(min) Energy(kWh) Water(l) 147 - 161 0.79 - 0.96 10.4 - 12.6 40 - 150 0.5 - 1.7 7 - 14 130 - 140 1.3 - 1.5 14 - 15 150 - 160 1.4 - 1.6 13 - 14 55 - 65 1.0 - 1.2 9 - 10 30 0.9 9 14 0.1 4 1) The pressure and the temperature of the water, the variations of the main...
Page 10 - OPTIONS; TimeSaver; EnergySaver; Hygiene; Option; Multitab; Acoustic signals
5. OPTIONS Activate or deactivate the optionsbefore the start of a program. Youcannot activate or deactivate theoptions while a program operates. If one or more options are set,make sure that the related indica-tors are on before the programstarts. 5.1 TimeSaver This option increases the pressure an...
Page 11 - BEFORE FIRST USE; Adjusting the water softener
How to activate the acoustic signalfor the end of program1. Press the on/off button to activate theappliance. Make sure that the appli-ance is in setting mode, refer to “Set-ting and starting a program”. 2. Press and hold, at the same time, De- lay and EnergySaver until the indica- tors , and start ...
Page 12 - Electronic adjustment; lay; Filling the salt container
Electronic adjustment 1. Press the on/off button to activate theappliance. Make sure that the appli-ance is in setting mode, refer to “Set-ting and starting a program”. 2. Press and hold, at the same time, De- lay and EnergySaver until the indica- tors , and start to flash. 3. Press MyFavourite , • ...
Page 13 - DAILY USE; Using the detergent; Setting and starting a; Start; Setting mode; Reset
7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate theappliance. Make sure that the appli-ance is in setting mode, refer to “Set-ting and starting a program”.• If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispens...
Page 14 - Cancelling the program; At the end of the program; Important; HINTS AND TIPS; The water softener
• The program duration starts to de- crease with steps of 1 minute. Starting a program with delaystart 1. Set the program. 2. Press Delay again and again until the display shows the delay time you wantto set (from 1 to 24 hours). The Delayindicator comes on. The program indi-cator, the program bar a...
Page 15 - CARE AND CLEANING; Cleaning the filters
water hardness in your area. Refer tothe instructions on the packaging of theproducts. • Detergent tablets do not fully dissolve with short programs. To prevent deter-gent residues on the tableware, we rec-ommend that you use the tablets withlong programs. Do not use more than the correctquantity of...
Page 16 - TROUBLESHOOTING; Problem
A1 A2 2. To disassemble the filter ( A ), pull apart ( A1 ) and ( A2 ). 3. Remove the filter ( B ). 4. Wash the filters with water. 5. Before you put the filter ( B ) back, make sure that there are no residuesof food or soil in or around the edgeof the sump. 6. Make sure that the filter ( B ) is cor...
Page 17 - If the washing and drying; Dishes are wet; How to activate the rinse
Problem Possible solution The program does not start. Make sure that the appliance door is closed. Press Start . If the delay start is set, cancel the setting orwait for the end of the countdown. The appliance does not fill withwater. Make sure that the water tap is open. Make sure that the pressure...
Page 18 - TECHNICAL INFORMATION
• The indicators and go off. • The indicator continues to flash. • The display shows the current set- ting. Rinse aid dispenser off Rinse aid dispenser on 4. Press TimeSaver to change the set- ting. 5. Press the on/off button to deactivatethe appliance and to confirm the set-ting. 6. Adjust the rele...
Page 19 - INSTALLATION; Fitting under a kitchen
12. INSTALLATION 12.1 Fitting under a kitchen counter The plinth of a freestanding appliance isnot adjustable.Do not remove the appliance worktop ifyou want to use it as a freestanding unit. It is not necessary to remove the worktopwhen installing under a standard kitchencounter.Only remove the appl...
Page 20 - Inlet water supply; Water drain hose; Remove
Energy savings can be made by connect-ing the appliance to a Solar water systemand using economy options, however thewater temperature must not exceed 60°C. Inlet water supply • Water pressure: 800 kPa max - 50 kPa min. • Water flow rate 10 L / minute min.• If water pressure is in excess of 800 kPa,...
Page 21 - WARRANTY
13. WARRANTY FOR SALES IN AUSTRALIA AND NEWZEALANDAPPLIANCE: DISHWASHER This document sets out the terms andconditions of the product warrantiesfor Electrolux Appliances. It is an im-portant document. Please keep it withyour proof of purchase documents ina safe place for future referenceshould you r...
Page 22 - Important Notice
owner’s cost and risk while in transitto and from Electrolux or its ASC. 6. Proof of purchase is required beforeyou can make a claim under this war-ranty. 7. You may not make a claim under thiswarranty unless the defect claimed isdue to faulty or defective parts orworkmanship. Electrolux is not liab...
Page 23 - ENVIRONMENT CONCERNS
Before calling for service, please ensure that the steps listed in point 13 above have been followed. FOR SERVICE or to find the address ofyour nearest state servicecentre in Australia Please call 13 13 4 9 For the cost of a local call (Aus- tralia only) SERVICE AUSTRALIA ELECTROLUX HOMEPRODUCTS www...
