Dishlex DSF6305W - User Manual

Page 2 - Contents; Subject to change without notice.; Safety information

Contents Safety information 2 Safety instructions 3 Control panel 4 Programs 5 Settings 6 Before first use 7 Daily use 7 Hints and tips 10 Care and cleaning 11 Troubleshooting 12 Technical information 13 Warranty 14 Subject to change without notice. Safety information Before the installation and use...

Page 3 - Safety instructions; Installation; Warning! Risk of fire and electrical; Water connection

• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or a similarly qualified persons in order to avoid a hazard. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the ap...

Page 4 - Control panel; Indicators; Indicator

• Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or ite...

Page 5 - Programs; Information for test institutes; For all the necessary information for test performance,

Programs Program Degree of soil Type of load Program phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 2) Normal soilCrockery andcutlery • Prewash • Wash 50 °C • Rinses • Dry 128 0.75 10.3 3) AllCrockery, cut-lery, pots andpans • Prewash • Wash from 45 °Cto 70 °C • Rinses • Dry 40 -...

Page 6 - Settings; Program selection mode; and; Activating Rinse Aid with option Multi Tab activated

Settings Program selection mode The appliance is in Program selection mode when all the program indicators come on and the display shows 2 horizontal status bar.When the appliance is in Program selection mode it is possible to set a program. If the control panel does not show this condition, use the...

Page 7 - Before first use; Start a program to remove any processing; Adding rinse aid; Daily use; Set the correct program for the type of load and the

1. Make sure that the appliance is in Program selection mode.2. Press and hold at the same time and until the indicators , and start to flash. 3. Press . and go off. continues to flash. The display shows the current setting of the rinse aid dispenser. • = rinse aid dispenser deactivated. • = rinse a...

Page 8 - • 5 minutes after the completion of the program.; Starting a program

Adding detergent 2 1 20 30 A B If the program has a prewash phase, put a small quantity of detergent also in compartment B. Adding multi-tablets 20 30 A B 20 30 The Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating.The f...

Page 9 - Option Delay; Press Delay until the display shows the delay time you want to set.; Option Multi Tab

1. Press the on/off button to activate the appliance. Make sure that the appliance is in program selection mode. 2. Press the button related to the program you want to start. • The related program indicator starts to flash. • The display shows the program duration. 3. Close the appliance door to sta...

Page 10 - At the end of the program; Hints and tips; General; Start the shortest program with a rinsing phase. Do; Loading the baskets

At the end of the program 5 min Press the on/off button to deactivate the appliance. If you don't press the on/off button, the Auto Off function automatically deactivates the appliance a few minutes after the end of the program. Hints and tips General The following hints will ensure optimal cleaning...

Page 11 - Let the tableware cool down before you remove it; Care and cleaning; Cleaning the filters

• Remove remaining food from the items. • Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses....

Page 12 - Troubleshooting; With some problems, the display shows an alarm; Problem and alarm code

Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleani...

Page 13 - The washing and drying results are not satisfactory; Problem; Technical information; Rating Plate

The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks or bluish lay-ers on glasses and dishes. • The release quantity of rinse aid is too much. Adjust the rinse aid selec-tor to a lower position. • The quantity of detergent is too much. There are sta...

Page 14 - Warranty

Warranty FOR SALES IN AUSTRALIA AND NEW ZEALANDAPPLIANCE: DISHWASHERThis document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you r...

Page 15 - Important Notice; SERVICE AUSTRALIA; SERVICE NEW ZEALAND

– failure to comply with any additional instructions supplied with the Appliance; b) the Appliance is modified without authority from Electrolux in writing; c) the Appliance’s serial number or warranty seal has been removed or defaced; d) the Appliance was serviced or repaired by anyone other than E...

Page 16 - ENVIRONMENT CONCERNS

ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste...

Dishlex DSF6305W - User Manual

Table of Contents:

Summary

Other Dishlex Dishwashers Models