Dishlex DSF6205X - Manuals - manualsarea.com

Page 2 - Contents; Subject to change without notice.; Safety information

Contents Safety information 2 Safety instructions 3 Control panel 4 Programs 5 Settings 6 Before first use 7 Daily use 7 Hints and tips 10 Care and cleaning 11 Troubleshooting 11 Technical information 13 Warranty 13 Subject to change without notice. Safety information Before the installation and use...

Page 3 - Safety instructions; Installation; Warning! Risk of fire and electrical; Water connection

• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or a similarly qualified persons in order to avoid a hazard. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the ap...

Page 4 - Control panel; Indicators; Indicator

• Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or ite...

Page 5 - Programs

Indicator Description End indicator. Multitab indicator. Rinse aid indicator. It is always off while the program operates. Programs Program Degree of soil Type of load Program phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 2) Normal soilCrockery andcutlery • Prewash • Wash 50 °C ...

Page 6 - Settings; Program selection mode; does not show this condition, use the Reset function.; Reset; and

Settings Program selection mode The appliance is in Program selection mode when the program duration flashes in the display. If the control panel does not show this condition, use the Reset function. Reset With Reset you can cancel the running program or the delay start. The appliance goes back to t...

Page 7 - Activating Rinse Aid with option Multi Tab activated; Press Delay again to change the setting.; Before first use; Start a program to remove any processing; Adding rinse aid; Daily use; Set the correct program for the type of load and the

Activating Rinse Aid with option Multi Tab activated 1. Make sure that the appliance is in Program selection mode.2. Turn the program knob until the program marker is aligned with . 3. Press and hold at the same time Multi Tab and Delay until the indicators , and start to flash . 4. Press Delay. The...

Page 8 - • 5 minutes after the completion of the program.; Starting a program; Press the on/off button to activate the appliance; • The duration of the program flashes in the display.

Adding detergent 2 1 20 30 A B If the program has a prewash phase, put a small quantity of detergent also in compartment B. Adding multi-tablets 20 30 A B 20 30 The Auto Off function This function decreases energy consumption by deactivating automatically the appliance when it is not operating.The f...

Page 9 - This option is not applicable to; Opening the door while the appliance operates; continues from the point of interruption.; At the end of the program

Option Delay max. 1. Set the program. 2. Press Delay again and again until the display shows the delay time you want to set. 3. Press Start. The countdown starts to decrease with steps of 1 hour.When the countdown is completed the program starts and the indicator of the running phase come on. Option...

Page 10 - Hints and tips; Start the shortest program with a rinsing phase. Do

Hints and tips General The following hints will ensure optimal cleaning and drying results in daily use and also help to protect the environment.• Remove larger residues of food from the dishes into the waste bin. • Do not pre-rinse dishes by hand. When needed, use the prewash program (if available)...

Page 11 - Care and cleaning; Cleaning the filters; Troubleshooting; With some problems, the display shows an alarm

Care and cleaning Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spay arms decrease the washing results. Make a check regularly and, if necessary, clean them. Cleaning the filters B A C • Make sure that there are no...

Page 12 - The washing and drying results are not satisfactory; Problem

Problem and alarm code Possible solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no a damage fuse in the fuse box. The program does not start. • Make sure that the appliance door is closed. • Press Start. • If the...

Page 13 - Technical information; Rating Plate; Warranty

Technical information Dimensions Width / height / depth (mm) 600 / 850 / 625 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 12 Power consumptio...

Page 15 - Important Notice; SERVICE AUSTRALIA; SERVICE NEW ZEALAND; ENVIRONMENT CONCERNS

Appliances or services to which the warranty relates. 11. At all times during the Warranty Period, Electrolux shall, at its discretion, determine whether repair, replacement or refund will apply if an Appliance has a valid warranty claim applicable to it. 12. For Appliances and services provided by ...