Page 2 - Contents; Subject to change without notice.; Safety information
Contents Safety information 2 Safety instructions 3 Control panel 4 Programs 5 Before first use 5 Daily use 6 Hints and tips 9 Care and cleaning 10 Troubleshooting 11 Technical information 12 Warranty 12 Subject to change without notice. Safety information Before the installation and use of the appl...
Page 3 - Safety instructions; Installation; Warning! Risk of fire and electrical; Water connection
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or a similarly qualified persons in order to avoid a hazard. • Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the ap...
Page 4 - Control panel; Indicators; Indicator
• Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or ite...
Page 5 - Programs; Information for test institutes; For all the necessary information for test performance,; Before first use
Indicator Description Rinse aid indicator. It is always off while the program operates. Half Load indicator. Programs Program Degree of soil Type of load Program phases Consumption values 1) Duration (min) Energy (kWh) Water (l) 2) Normal soilCrockery andcutlery • Prewash • Wash 50 °C • Rinses • Dry...
Page 6 - Start a program to remove any processing; residuals that can still be inside the appliance. Do; Adding rinse aid; Daily use; Set the correct program for the type of load and the; Make sure that the appliance is in Program selection; Adding detergent; • Set the rinse aid dispenser to the lowest position.
3. Start a program to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not load the baskets. Adding rinse aid 2 1 4 3 2 1 The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. Dail...
Page 8 - Option Half load; the related indicator comes on.; Opening the door while the appliance operates; continues from the point of interruption.; At the end of the program
Option Half load 1. Set the program.2. Press the related indicator comes on. 3. Press to start the program. This option is available with , and . With this option you can wash a small load of tableware and cookware. The option decreases the program duration and the consumption of water and energy. L...
Page 9 - Hints and tips; General; Start the shortest program with a rinsing phase. Do; Loading the baskets
The indicator comes on. If you do not deactivate the appliance within 5 minutes all indicators goes off. This helps to decrease energy consumption. Turn the knob to . Close the tap. For the better drying results keep the appliance door ajar for some minutes before you remove the dishes. Let the dish...
Page 10 - Unloading the baskets; Let the tableware cool down before you remove it; Care and cleaning; Cleaning the filters
Unloading the baskets 1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged. 2. First remove items from the lower basket, then from the upper basket. At the end of the program water can still remain on the sides and on the door of the appliance. For ...
Page 11 - Troubleshooting; Problem and alarm code; The washing and drying results are not satisfactory; Problem
run long duration program at least 2 times per month. Troubleshooting If the appliance does not start or it stops during operation, before you contact the Service, check if you can solve the problem by yourself with the help of the information in the table. With some problems different indicators fl...
Page 12 - Technical information; Rating Plate; Warranty; the product warranties for Electrolux Appliances. It; of this warranty has the same meaning
Problem Possible solution The dishes are wet. • The program does not have a drying phase or has a drying phase withlow temperature. • The rinse aid dispenser is empty. • The quality of the rinse aid can be the cause. • Keep the dishwasher door ajar for some time before removing table-ware. Refer to ...
Page 14 - Important Notice; SERVICE AUSTRALIA; SERVICE NEW ZEALAND; ENVIRONMENT CONCERNS
replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. The benefits to you given by this warranty are in addition to your other rights and remedies under a law in relation to the Appliances or services to which the warranty relates. 11. At all...