DeLonghi DEDW60W- User Manual

SITE WORKS AND
FOUNDATIONS

Earthwork allowance:

for cut and

compacted fill up to a 600mm fall
across the site to create a level building
platform.
• Excess soil is left on site for clients

use, all construction rubbish is

removed from site.

• Concrete pump is allowed for if
required.

STANDARD CONTRACT
INCLUSIONS

Lodgement of building application,
including fees, contract works policy,
builder’s structural insurance and
portable long service levy fees.
•

6 month maintenance period

•

6 year structural warranty

•

Construction to suit “S” type soil

and up to C1 wind rating.

• Home shall be constructed

complying with the Building Code of

Australia housing provisions, with

wind rating, soil test, concrete slab,

block work, trusses and frame

design being engineer certified,

• Construction stages are inspected

by a registered engineer, building

inspector or building surveyor.

• Rheem 325Lt Electric heat pump

Hot Water System (or equivalent)

ROOF

Ceiling Height:

2600mm.

Cornice:

90mm coved.

Ceiling Insulation:

Energy efficient R3.5

ceiling batts to all living areas including
the garage, patio and porch ceilings
(excluding only the eaves).

ROOF COVER

Roof Pitch:

21 degrees.

Roof Trusses:

Engineer designed and

certified, using termite treated pine,
spaced at 1200mm centres with metal
ceiling battens spaced at 450 centres.

Roof Sheeting:

BHP Colorbond metal.

Guttering:

Colorbond square or quad.

Fascia:

Choice of Colorbond colours.

Eaves:

600mm.

Downpipes:

90mm PVC.

TERMITE PROTECTION

House Perimeter:

Protected by vertical

exposed concrete slab edges.

Slab Penetration and Control Joints:

Are protected by physical termite barriers.

Wall Studs and Trusses:

termite treated

pine framing, Internal architraves and
skirting boards.
* Items not protected are internal wall
coverings, doors, floating timber flooring,
joinery cupboards and tops.
* Supplementary termite control systems
are available at additional costs

GARAGE DOOR

Garage Door:

B’n’D Colourbond

Panelift Garage door, approximately
2100mm high x 5000mm wide, in choice
of standard colorbond colours and
models on woodgrained finish panels
with remote control and two handsets.

EXTERNAL WALLS AND FINISH

Block Walls:

200mm series concrete

masonry block.

Render:

A TWO coat render system up

to 2mm thick to outside walls (with swirl,
vertical scratch or granite finish).
• Inside garage and gables when flush

with masonry block walls to have 2

coats of render system as per

external finish.

• All sheeted Dutch gables are to be

painted cement sheet with painted

feature timber when shown, all other

sheeted gables are to be painted 2

coat render on 8mm thick

compressed cement, blue board

sheeting.

INTERNAL WALLS

Timber Framing:

70mm and 90mm

termite treated pine.

Internal Wall and Ceiling Linings:

10mm gyprock to walls and ceilings.
10mm water resistant plasterboard to
wet area walls, patio ceilings and garage
base sheet. Villa board to shower and
bath walls.

ALUMINIUM FRAMED
WINDOWS AND DOORS

Key lockable, powder coated aluminium
windows and external sliding doors.
• E.E. grey tinted glass up to 2000mm

high in full builder’s frame colour

range.
• Choice of clear or obscure glass

to bathroom, ensuite and toilet

windows.

HINGED DOORS

Corinthian Front Doors:

•

Urban

PURB 04, 101 or 104, or

•

Madison

PMAD 04, 101, 104 or

•

Windsor

WIN 5, 7, 7G with clear or

translucent glass, when applicable (all
paint finish).

Rear External Doors:

Duracoat

tempered hard board external rear door
(paint grade finish).

Internal Doors:

Corinthian Woodgrain

Gold Inclusions

www.mystylehomes.com.au

PAGE 1

Gold 1:5