Page 2 - PRODUCT LABEL
2 Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. Theywill also provide a means by which to make full use ofthe features offered by your appliance. Please kee...
Page 3 - USING THE OVEN FOR THE FIRST TIME
3 IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FORUSE OF ELECTRICAL APPLIANCES Use of any electrical appliance implies the necessity to follow a series of fundamentalrules. In particular: ■ Never touch the appliance with wet hands or feet; ■ do not operate the appliance barefooted; ■ The appliance is n...
Page 4 - IMPORTANT PRECAUTIONS AND RECOMMENDATIONS; WARNING; WARNING: Taking care NOT to lift the cooker by the door handle/s.
4 IMPORTANT PRECAUTIONS AND RECOMMENDATIONS After having unpacked the appliance, check to ensure that it is not damaged.In case of doubt, do not use it and consult your supplier or a professionally qualified technician.Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc...
Page 5 - INSTALLATION; This appliance shall only be serviced by authorized personnel.; ELECTRICAL REQUIREMENTS; The power supply cable must not touch the hot parts and must be
5 INSTALLATION CAUTION: ■ This appliance must be installed in accordance with these installationinstructions. ■ This appliance shall only be serviced by authorized personnel. ■ This appliance is to be installed only by an authorised person. ■ Incorrect installation, for which the manufacturer accept...
Page 6 - CLEARANCES; Overhead Clearances
CLEARANCES Installation clearances and protection of combustible surfaces shall comply with thecurrent local regulations eg. AG 601 (AS 5601) Gas Installations code.Installation shall comply with the dimension in Fig. 1a bearing in mind that. Overhead Clearances In no case shall the clearances betwe...
Page 7 - Figure 1a; max; GAS AND ELECTRIC CONNECTION; Figure 1b
7 m m 05 7 m m 0 0 5 m m 5 7 m m 0 0 1 m m 05 4 AUTO Cooker overall dimensions [mm] • height: min 900 - max 925• width: 900• depth: 600 Figure 1a max 280 mm Dotted lineshowing theposition of thecooker wheninstalled Area for GASand ELECTRICconnection GAS AND ELECTRIC CONNECTION Figure 1b
Page 8 - LEVELLING THE COOKER; Figure 4; FITTING THE ADJUSTABLE FEET; Figure 3
8 LEVELLING THE COOKER The cooker may be levelled by screwing the lower ends of the feet IN or OUT (fig. 4). Figure 4 Figure 2 FITTING THE ADJUSTABLE FEET The adjustable feet must be fitted to the base of the cooker before use. Rest the rear of the cooker an a piece of the polystyrene packaging expo...
Page 9 - Figure 6; MOVING THE COOKER
9 WARNING When moving cooker to its final posi-tion DO NOT DRAG (fig. 7). Lift feet clear of floor (fig. 5). Figure 6 Figure 7 Figure 5 WARNINGWhen raising cooker to upright position always ensure two people carry outthis manoeuvre to prevent damage to the adjustable feet (fig. 5). MOVING THE COOKER...
Page 10 - Figure 8b; Figure 8c; Figure 8a
10 ANTI-TILT BRACKET Important! To restrain the applianceand prevent it tipping acci-dentally, fit a bracket to itsre a r t o f i x i t s e c u re l y t ot h e w a l l . M a k e s u re y o ualso fit the supplied lockpin to the anti-tilt bracket . To fit the anti-tilt bracket: 1. A f t e r y o u h a ...
Page 11 - Figure 9; BACKGUARD; The backguard “C” can be found packed at the rear of the cooker.
11 Figure 9 A B BACKGUARD Before installing the cooker, assemble the backguard “C” (fig. 9). ■ The backguard “C” can be found packed at the rear of the cooker. ■ Before assembling remove any protective film/adhesive tape. ■ Remove the two spacers “A” and the screw “B” from the rear of the cooktop. ■...
Page 12 - not cross the cooker.; Gas connection for
12 GAS SUPPLY: ■ The connection must be performed by an authorised person according to the rele- vant standards. ■ Before connecting the appliance to the gas main, mount the brass conical adaptor onto the gas inlet pipe, upon which the gasket has been placed (figures 10-11). Conical adaptor and gask...
Page 13 - IS NOT SUITABLE; for installation with a hose
13 1. After connecting the gas supply, check the piping and connections for leaks using a soap and water solution. The presence of bubbles indicates a leak, tighten orreplace connections as appropriate. Warning: Do not use any naked flame to check for leaks. 2. Adjust the test point pressure or supp...
Page 14 - REPLACING THE INJECTORS; To replace the injectors proceed as follows:; IMPORTANT
14 CONVERSION PROCEDURE (to convert to Natural gas or toULPG) REPLACING THE INJECTORS This appliance is suitable for use with Natural gas or ULPG (check the “gas type” stickerattached to the appliance). A label stating the type of gas used after replacing theinjectors must be attached at the rear of...
Page 15 - MINIMUM BURNER SETTING ADJUSTMENT; Turn on the burner
15 MINIMUM BURNER SETTING ADJUSTMENT Check whether the flame spreads to all burner ports when the burner is lit with the gastap set to the minimum position. If some ports do not light, increase the minimum gasrate setting. Check whether the burner remains lit even when the gas tap is turned quickly ...
Page 16 - Natural gas
16 LUBRICATION OF THE GAS TAPS If the gas tap becomes stiff, it is necessary to dismantle it carefully and clean it withpetroleum spirit. Specialist high temperature resistant grease should be used tolubricate the tap before replacing.The operations must be carried out by an authorised person/servic...
Page 17 - USE and CARE
17 USE and CARE CAUTION: ■ This appliance must be used only for the task it has explicitly been designed for, that is for domestic cooking of foodstuffs. Any other form of usage is to be con-sidered as inappropriate and therefore dangerous. ■ Do NOT place combustible materials or products on this ap...
Page 19 - GREASE FILTER; When baking pastry etc. this filter should be removed.
19 GREASE FILTER ■ A special screen is provided at the back of the multifunction main oven to catch grease particles, mainly when meat is being roasted (fig. 21). ■ When baking pastry etc. this filter should be removed. ■ Always clean the filter after cooking as any solid residues on it might advers...
Page 20 - GAS HOB; GAS BURNERS
20 Figure 22 GAS HOB 2 3 2 1 4 GAS BURNERS Natural Gas ULPG MJ/h MJ/h 1. Auxiliary burner (A) 3.6 3.6 2. Semi-rapid burner (SR) 6.3 6.3 3. Fish burner (FB) 10.6 10.6 4. Triple ring burner (TC) 13.3 11.9
Page 21 - LIGHTING GAS BURNERS; FITTED WITH SAFETY VALVE DEVICE AND ELECTRONIC IGNITION
21 Figure 23 LIGHTING GAS BURNERS FITTED WITH SAFETY VALVE DEVICE AND ELECTRONIC IGNITION ■ Check that the electricity is switched on to allow spark igni-tion. ■ Make sure that all controls are turned to zero. ■ The gas flow to the burner is controlled by taps with safetycutout device. If the burner...
Page 22 - CHOICE OF BURNER; DO NOT; Burners
22 CHOICE OF BURNER The burner must be chosen according to the diameter of the pans and energyrequired. For optimum efficiency uso a wok or pan no smaller than 230 mm diameter. Saucepans with handles which are excessively heavy, in relationship to the weightof the pan, are safer as they are less lik...
Page 23 - CORRECT USE OF TRIPLE-RING BURNER; To use the WOK, you must place the wok stand in the; CORRECT; position as; WRONG; GRATE FOR SMALL PANS
23 Figure 25a Figure 25b CORRECT USE OF TRIPLE-RING BURNER ■ The flat-bottomed pans are to be placed directly onto the pan-support. ■ To use the WOK, you must place the wok stand in the CORRECT position as shown in Fig. 25a-25b. IMPORTANT: The special grille for wok pans (fig. 25b) MUST BE PLACED ON...
Page 24 - Controls description; CONTROL PANEL; Please note
24 Controls description 1. Multifunction main oven thermostat knob2. Multifunction main oven switch knob3. Front left burner control knob4. Rear left burner control knob5. Fish burner control knob6. Rear right burner control knob7. Front right burner control knob8. Conventional oven switch knob9. Co...
Page 25 - LEFT MULTIFUNCTION MAIN OVEN; GENERAL FEATURES; Heating and cooking in the; a. by normal convection; The heat is produced by the upper and lower heating elements.; b. by forced convection; The food is grilled by the infra red grill element.; e. by radiant heat and ventilation; The food is defrosted by using the fan only function without heat.
25 LEFT MULTIFUNCTION MAIN OVEN GENERAL FEATURES With your new Multi-Function oven it is possible to cook a variety of food using the 6different cooking functions.These 6 functions are obtained using a combination of the 4 different heating elementsplus a defrost function using the fan only. OPERATI...
Page 27 - DEFROST; Only the oven fan comes on. Use with the thermostat knob set to “; GRILLING; oven door closed; and the thermostat knob to position; FAN GRILL; closed; FAN FORCED
27 DEFROST Only the oven fan comes on. Use with the thermostat knob set to “ ” - other temper- ature have no effect. The food is thawed by ventilation without heating. Ideal for: Quick thawing of frozen foods; one kg requires approximately 1 hour. Thawing times vary according to the quantity and typ...
Page 28 - COOKING ADVICE; STERILIZATION; the door and set the thermostat knob to position 135 °C.; WARMING BREAD; Set the switch to position
28 MAINTAINING TEMPERATURE AFTER COOKING OR SLOWLY HEATING FOODS The upper element, the circular element and the fan come on. The heat is circulated by forced convection with greater intensity in the upper part. The temperature can be set to between 50 °C and 140 °C via the thermostat knob. Ideal fo...
Page 29 - USE OF THE GRILL; Preheat the oven for about 5 minutes with the door closed.; Do not grill for longer than 30 minutes at any one time.; ROASTING; To obtain classical roasting, it is necessary to remember:; GRILLING AND COOKING AU GRATIN; SIMULTANEOUS COOKING OF DIFFERENT FOODS; The oven set on position
29 USE OF THE GRILL Preheat the oven for about 5 minutes with the door closed. Introduce the food to be cooked, positioning the rack as close to the grill as possible.The dripping pan should be placed under the rack to catch the cooking juices andfats. Do not grill for longer than 30 minutes at any ...
Page 30 - RIGHT CONVENTIONAL OVEN; OPERATING PRINCIPLES; CONVENTIONAL; oven are obtained in the following
30 Figure 28 GENERAL FEATURES This is a conventional oven with 4 cooking positions, thermostatically controlled, obtainedby 3 heating elements (top, bottom and grill). This oven is equipped with a special dish rack for use with the special function “ ”. In this setting you can use your conventional ...
Page 31 - “Plate warming” to obtain the plates
31 OVEN LIGHT By setting the knob to this position, only the oven light comes on. It remains on in all the cooking modes. FUNCTION SELECTOR KNOB Rotate the knob clockwise to set the oven for one of the following functions. THERMOSTAT KNOB This only sets the cooking temperature and does not switch th...
Page 32 - OVEN COOKING; door closed
32 COOKING ADVICE OVEN COOKING Before introducing the food, preheat the oven to the desired temperature. For a correct preheating operation, it is advisable to remove the tray from the oven andintroduce it together with the food, when the oven has reached the desired tempera-ture.Check the cooking t...
Page 34 - USE OF SPECIAL DISH RACK; USING THE SPECIAL SHELF AS A DISH RACK
34 USE OF SPECIAL DISH RACK This special shelf can be used as dish rack or turning over, as normal shelf for ovencooking. It must be inserted between the guides of the lateral racks. USING THE SPECIAL SHELF AS A DISH RACK Slide in the shelf on the guides, on the lower level of the lateral raks. The ...
Page 35 - RECOMMENDED COOKING TEMPERATURE
35 N.B. For fan ovens reduce the temperature by 10-20 °C. For any dish taking one houror over to cook, reduce the cooking time by10 minutes per hour. * Shelf positions have been counted from the top of the oven to the base.A fan oven creates more even temperaturethroughout, therefore the shelf posit...
Page 36 - ELECTRONIC PROGRAMMER; Description of the buttons:; Description of the lighted symbols:
36 ELECTRONIC PROGRAMMER (Main left oven only) The electronic programmer is a device which groups together the following functions: ■ 24 hours clock with illuminated display ■ Timer (up to 23 hours and 59 minutes) ■ Program for automatic oven cooking (main oven only) ■ Program for semi-automatic ove...
Page 37 - ELECTRONIC CLOCK; N o t e; ELECTRONIC TIMER; AUTO
37 ELECTRONIC CLOCK (fig. 33) The programmer is equipped with anelectronic clock with lighted numberswhich indicate hours and minutes. U p o n i m m e d i a t e c o n n e c t i o n o f t h eoven or after a blackout, three zeroeswill flash on the programmer panel. To set the hour it is necessary to p...
Page 40 - GENERAL ADVICE; ENAMELLED PARTS; Cleaning and Maintenance
40 GENERAL ADVICE ■ Before you begin cleaning, you must ensure that the appliance is switched off. ■ It is advisable to clean when the appliance is cold and especially when cleaning the enamelled parts. ■ Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces. ■ Avo...
Page 41 - INSIDE OF OVEN; The oven should always be cleaned after use when it has cooled down.; Do not store flammable material in the oven.; ADVICE FOR USE AND MAINTENANCE OF CATALYTIC; Switch the cooker off at the mains; Oven bulb replacement is not covered by your guarantee.; GRILL HEATING ELEMENT
41 INSIDE OF OVEN ■ The oven should always be cleaned after use when it has cooled down. The cavity should be cleaned using a mild detergent solution and warm water.Suitable proprietary chemical cleaners may be used after first consulting with themanufacturers recommendations and testing a small sam...
Page 42 - BURNERS; CORRECTLY; and the cap; TRIPLE RING BURNER; and the ring
42 BURNERS They can be removed and washed only with soapywater. Detergents can be used but must not beabrasive or corrosive.Do not use abrasive sponges or pads.Do not put in dishwasher.After each cleaning, make sure that theburner-caps, as well as the burners, havebeen well wiped off and CORRECTLY P...
Page 43 - CORRECT POSITION OF THE FISH BURNER; This burner must be correctly positioned as shown in the figure 43.; Both the probe and ignition plug must be very carefully cleaned.
43 Figure 43 CORRECT POSITION OF THE FISH BURNER This burner must be correctly positioned as shown in the figure 43. Both the probe and ignition plug must be very carefully cleaned.
Page 44 - not over tighten the screws.
44 STORAGE COMPARTMENT ■ The storage compartment is accessible through the pivoting panel. Attention: Do not store flammable material in the ovens, or the storage com-partment. REMOVAL OF THE INNER GLASS DOOR PANEL ■ The inner glass door panel can easily be removed for cleaning by unscrew- ing the t...
Page 45 - Please operate as follows:
45 DOOR ASSEMBLY ■ Grip the door (as indicated in fig- u re 4 6 ) a n d re f i t i t i n re v e r s eorder of removal procedure. DISMANTLING THE DOOR Please operate as follows: ■ Open the door completely. ■ The swivel retainers of the rh a n d l h h i n g e s ( f i g . 4 6 a ) a r eh o o k e d o n t...
Page 46 - Service and Maintenance
46 If the ignition spark fails to ignite or does not light the gas, check the followingitems before calling our Customer Service Centre to obtain the nearest AuthorisedService Agent: ■ Burner is reassembled and located correctly. ■ Spark electrode and white ceramic are clean and dry. ■ 240 VAC power...
Page 47 - WIRING DIAGRAM; ELECTRIC DIAGRAM KEY; LEFT OVEN; RIGHT OVEN
47 WIRING DIAGRAM ELECTRIC DIAGRAM KEY A Ignition coil PA Ignition switches TL1/2 Cooling fan with thermolimitators CF Cooling fan M Terminal block T Hearth plant LEFT OVEN F1 Oven switch TM Oven thermostat PR Programmer TL Thermal overload LF Oven Lamp S1 Thermostat pilot lamp C Top element G Grill...
