Cisco WS-X4516 - Manual
Cisco WS-X4516 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Overview
- Page 7 – Supervisor Engine V
- Page 9 – Features of the Supervisor Engine Front Panel; LEDs; LED
- Page 10 – Gigabit Ethernet Uplink Ports; Ethernet Management Port; Reset Button
- Page 11 – Flash Port; Port Cabling Specifications; Maximum Cable Distances; Cable Type
- Page 12 – Using a Patch Cord; GBIC
- Page 13 – Installing and Removing the Supervisor Engine; Required Tools; Preventing Electrostatic Discharge Damage
- Page 14 – Installing the Supervisor Engine
- Page 15 – show module
- Page 16 – Removing the Supervisor Engine
- Page 17 – Attaching Module Interface Cables
- Page 18 – Configuring Your Supervisor Engine; GBIC Handling Guidelines and Installation
- Page 19 – Installing a GBIC
- Page 20 – Removing a GBIC
- Page 21 – GBIC Maintenance Guidelines; Related Documentation; Obtaining Documentation and Submitting a Service Request
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installation and Configuration Note for the
Catalyst 4500 Series Supervisor Engine V
Product Numbers: WS-X4516 = Catalyst 4500 Series Supervisor Engine V
This publication describes how to install and verify the operation of the Catalyst 4500 series
Supervisor Engine V. Refer to the software configuration guide for your switch for configuration
information for the supervisor engines and switching modules.
Contents
This document contains these sections:
•
•
•
Port Cabling Specifications, page 11
•
Installing and Removing the Supervisor Engine, page 13
•
Attaching Module Interface Cables, page 17
•
Configuring Your Supervisor Engine, page 18
•
GBIC Handling Guidelines and Installation, page 18
•
Related Documentation, page 21
•
OObtaining Documentation and Submitting a Service Request, page 21
•
Obtaining Technical Assistance, page 20
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installation and Configuration Note for the Catalyst 4500 Series Supervisor Engine V 78-15590-02 Safety Overview Safety Overview Throughout this publication, safety warnings appear in procedures that can harm you if performed incorrectly. A warning symbol precedes each warning statement. Warning I...
7 Installation and Configuration Note for the Catalyst 4500 Series Supervisor Engine V 78-15590-02 Supervisor Engine V Supervisor Engine V This section describes the Catalyst 4500 series Supervisor Engine V (WS-X4516). See Figure 1 . This supervisor engine provides data path and data control for all...
9 Installation and Configuration Note for the Catalyst 4500 Series Supervisor Engine V 78-15590-02 Supervisor Engine V • Supervisor engine redundancy between primary and standby supervisor engines in Catalyst 4510R and Catalyst 4507R • 802.1Q tunneling • Storm control in hardware • Support for the C...
