Cisco WIC-1AM-V2 - Manual
Cisco WIC-1AM-V2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Remote Router Management and Out-of-Band Access
- Page 4 – Low-Density Analog RAS Access
- Page 5 – Configuring the Asynchronous Interface; SUMMARY STEPS; DETAILED STEPS; Command or Action
- Page 6 – ip local pool
- Page 7 – Examples; Configuring the Country Code
- Page 8 – show modemcap
- Page 9 – Country Code Table
- Page 10 – Configuring the Line on the Analog Modem WIC
- Page 11 – Upgrading the Modem Firmware
- Page 12 – upgrade modem firmware all; wic
- Page 13 – Verifying the Modem Firmware Upgrade; show modem; group
- Page 14 – Debugging Call Connect
- Page 16 – Debugging Call Disconnect
- Page 17 – debug modem
- Page 18 – Configuring for Asynchronous Dial Backup: Example
- Page 19 – Additional References; Related Documents; Related Topic; Standards
- Page 20 – MIBs; Command Reference
- Page 21 – upgrade modem firmware
- Page 22 – Related Commands
- Page 23 – Glossary
Corporate Headquarters:
Copyright © 2005—2006 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog
Modem WAN Interface Card
The Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card (WIC) for
Cisco 2600XM, Cisco 2691, Cisco 3700, and Cisco 3800 series multiservice platforms provide
low-density integrated modems for remote management, dial-backup, and low-density remote-access
servers (RAS).
Feature History for the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to
. An
account on Cisco.com is not required.
Contents
•
Prerequisites for Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, page 2
•
Restrictions for Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, page 2
•
Information About Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, page 3
•
How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, page 5
•
Configuration Examples for Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, page 18
•
Additional References, page 19
•
•
Release
Modification
12.2(2)XB
This feature was introduced.
12.2(8)T
This feature was integrated into the Cisco IOS Release 12.2(8)T.
12.3(14)T
This feature was integrated into the Cisco IOS Release 12.3(14)T to support
the WIC-1AM-V2 and WIC-2AM-V2 WICs.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Information About Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 3 Cisco IOS Release 12.3(14)T Information About Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC The Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card adds...
Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Information About Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 4 Cisco IOS Release 12.3(14)T Low-Density Analog RAS Access In this application, the V.90 modem WIC enables the platform to provide the services of a typical small remot...
Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 5 Cisco IOS Release 12.3(14)T How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC To configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC,...
