Cisco WIC-1AM-V2 - Manuals

Cisco WIC-1AM-V2 – Manual in PDF format online.

Manuals:

Manual

Manual Cisco WIC-1AM-V2

Summary

Page 3 - Remote Router Management and Out-of-Band Access

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Information About Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 3 Cisco IOS Release 12.3(14)T Information About Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC The Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card adds...

Page 4 - Low-Density Analog RAS Access

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Information About Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 4 Cisco IOS Release 12.3(14)T Low-Density Analog RAS Access In this application, the V.90 modem WIC enables the platform to provide the services of a typical small remot...

Page 5 - Configuring the Asynchronous Interface; SUMMARY STEPS; DETAILED STEPS; Command or Action

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 5 Cisco IOS Release 12.3(14)T How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC To configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC,...

Page 6 - ip local pool

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 6 Cisco IOS Release 12.3(14)T Step 3 interface async number Example: Router(config)# interface async 2 Enters the interface configuration mode for the asynchronous se...

Page 7 - Examples; Configuring the Country Code

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 7 Cisco IOS Release 12.3(14)T Examples The following provides an example configuration. Router(config)# interface async 33 Router(config-if)# ip unnumbered f0/0 Route...

Page 8 - show modemcap

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 8 Cisco IOS Release 12.3(14)T DETAILED STEPS Command or Action Purpose Step 1 enable Example: Router> enable Enables privileged EXEC mode. • Enter your password if...

Page 9 - Country Code Table

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 9 Cisco IOS Release 12.3(14)T Country Code Table Use the codes in this table to set the country code. Step 6 clear modem slot / port Example: Router(config-line)# cle...

Page 10 - Configuring the Line on the Analog Modem WIC

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 10 Cisco IOS Release 12.3(14)T Configuring the Line on the Analog Modem WIC Use these steps to configure the line on the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem ...

Page 11 - Upgrading the Modem Firmware

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 11 Cisco IOS Release 12.3(14)T Upgrading the Modem Firmware Complete these steps to upgrade the firmware in the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC. SUMM...

Page 12 - upgrade modem firmware all; wic

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 12 Cisco IOS Release 12.3(14)T DETAILED STEPS Examples This example shows the output of the upgrade modem firmware all command with a 1-port Cisco WIC-1AM-V2 modem in...

Page 13 - Verifying the Modem Firmware Upgrade; show modem; group

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 13 Cisco IOS Release 12.3(14)T ....................................................................................... ................................. TTY1: WIC-AM:...

Page 14 - Debugging Call Connect

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 14 Cisco IOS Release 12.3(14)T The show modem [ slot / port | group number ] command shows various performance statistics for a modem or group of modems. Example: Rou...

Page 16 - Debugging Call Disconnect

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 16 Cisco IOS Release 12.3(14)T Feb 10 20:34:20: As1 DDR: Dialer statechange to up Feb 10 20:34:20: As1 DDR: Dialer call has been placed Feb 10 20:34:20: Modem 0/0: PP...

Page 17 - debug modem

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 17 Cisco IOS Release 12.3(14)T Examples The debug modem command shows the state of the TTY lines. Example: This command will disconnect any active calls. Clear (reset...

Page 18 - Configuring for Asynchronous Dial Backup: Example

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Configuration Examples for Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC 18 Cisco IOS Release 12.3(14)T Configuration Examples for Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC This section contains the following examples: • Confi...

Page 19 - Additional References; Related Documents; Related Topic; Standards

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Additional References 19 Cisco IOS Release 12.3(14)T Additional References The following sections provide references related to the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC. Related Documents Standards Related Topic Document Tit...

Page 20 - MIBs; Command Reference

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Command Reference 20 Cisco IOS Release 12.3(14)T MIBs RFCs Technical Assistance Command Reference This section documents new and modified commands. All other commands used with this feature are documented in the Cisco IOS Release 12.3 c...

Page 21 - upgrade modem firmware

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card upgrade modem firmware 21 Cisco IOS Release 12.3(14)T upgrade modem firmware To upgrade the modem firmware, use the upgrade modem firmware command in global configuration mode. upgrade modem firmware [ all | slot slot | wic nm-slot / wi...

Page 22 - Related Commands

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card upgrade modem firmware 22 Cisco IOS Release 12.3(14)T It is best to copy the modem firmware file to Flash: or Slot0: before trying to upgrade the modems. After selecting the source, specify the filename. For example, tftp://192.168.100....

Page 23 - Glossary

Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card Glossary 23 Cisco IOS Release 12.3(14)T Glossary baud —bits per second data rate of an asynchronous interface. The term is not used as baud rate , as that is redundant. DDR —dial-on-demand routing. Also known as direct data routing or d...