Cisco Version 5.2 78-11180-01 - Manual
Cisco Version 5.2 78-11180-01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Follow these steps to open a PIX 515:; Removing PIX 515 Top Panel Screws
- Page 3 – Pull the Top Panel up to Remove; Follow these steps to open a PIX 510 and PIX 520 chassis:
- Page 4 – Removing the Top Panel Screws; Remove the top panel as shown in Figure 5-5.; Removing the Top Panel
- Page 5 – Replacing the Top Panel; Follow these steps to open a PIX10000 chassis:
- Page 6 – Attach the PIX10000 Top Panel by Matching the Slots; Opening a PIX Firewall Classic; Warning
- Page 7 – Opening the Front Panel Provides Access to the Power Switch; Remove the top panel.
- Page 8 – Replacing a Lithium Battery; Note
C H A P T E R
5-1
Installation Guide for the Cisco Secure PIX Firewall Version 5.2
78-11180-01
5
Opening a PIX Firewall Chassis
The instructions in this chapter describe how to open the top of the PIX Firewall chassis so you can add
upgrade boards and system memory.
This chapter includes the following sections, which provide information for each PIX Firewall model:
•
•
•
•
Opening a PIX Firewall Classic
•
Note
The PIX 506 chassis should not be opened.The PIX 506 does not contain user-serviceable
components.
Note
The PIX 525 top panel should not be opened. If you need to open the top panel, use the
procedure in the section “Opening a PIX 515” for related information.
Note
Opening the PIX Firewall case does not affect your Cisco warranty. Upgrading the PIX
Firewall does not require any special tools and does not create any radio frequency leaks.
Note
Save the existing configuration to Flash memory with the
write memory
command.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5-2 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX 515 Opening a PIX 515 Follow these steps to open a PIX 515: Step 1 Read the Cisco PIX Firewall Regulatory Compliance and Safety Information document for your respec...
5-3 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX 510 and PIX 520 Step 5 Pull the top panel up as shown in Figure 5-3. Put the top panel in a safe place. Figure 5-3 Pull the Top Panel up to Remove Opening a PIX 510...
5-4 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX 510 and PIX 520 Step 3 Remove the three screws holding the top panel in place, as shown in Figure 5-4. Figure 5-4 Removing the Top Panel Screws Step 4 Remove the to...
