Cisco Version 5.2 78-11180-01 - Manuals

Page 2 - Follow these steps to open a PIX 515:; Removing PIX 515 Top Panel Screws

5-2 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX 515 Opening a PIX 515 Follow these steps to open a PIX 515: Step 1 Read the Cisco PIX Firewall Regulatory Compliance and Safety Information document for your respec...

Page 3 - Pull the Top Panel up to Remove; Follow these steps to open a PIX 510 and PIX 520 chassis:

5-3 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX 510 and PIX 520 Step 5 Pull the top panel up as shown in Figure 5-3. Put the top panel in a safe place. Figure 5-3 Pull the Top Panel up to Remove Opening a PIX 510...

Page 4 - Removing the Top Panel Screws; Remove the top panel as shown in Figure 5-5.; Removing the Top Panel

5-4 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX 510 and PIX 520 Step 3 Remove the three screws holding the top panel in place, as shown in Figure 5-4. Figure 5-4 Removing the Top Panel Screws Step 4 Remove the to...

Page 5 - Replacing the Top Panel; Follow these steps to open a PIX10000 chassis:

5-5 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX10000 Closing a PIX 510 and PIX 520 Chassis Replace the top panel, as shown in Figure 5-6, and secure it with the three screws you removed in Step 3 in the previous ...

Page 6 - Attach the PIX10000 Top Panel by Matching the Slots; Opening a PIX Firewall Classic; Warning

5-6 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX Firewall Classic Closing a PIX10000 Follow these steps to close a PIX10000 chassis: Step 1 Attach the top panel as shown in Figure 5-8. The three slots in the top p...

Page 7 - Opening the Front Panel Provides Access to the Power Switch; Remove the top panel.

5-7 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Opening a PIX Firewall Classic Figure 5-9 Opening the Front Panel Provides Access to the Power Switch Step 4 At the back of the PIX Firewall unit, remove the power cord and if yo...

Page 8 - Replacing a Lithium Battery; Note

5-8 Installation Guide for the Cisco Secure PIX Firewall Version 5.2 78-11180-01 Chapter 5 Opening a PIX Firewall Chassis Replacing a Lithium Battery Replacing a Lithium Battery The PIX Firewall has a lithium battery on its main circuit board. This battery has an operating life of about 10 years. Wh...