Cisco SPA 2100 - Manual
Cisco SPA 2100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing the NationPhone Router & Phone Adapter SPA2100; Power off your DSL or cable modem and computer.; You can now make calls!; Pick up the phone receiver and listen for a dial tone. If you do
- Page 3 – light
- Page 4 – About the NationPhone Router & Phone Adapter; BEFORE PROCEEDING
- Page 5 – No Dial Tone; Reboot your
- Page 6 – GO; button or hit Enter on your keyboard.
- Page 7 – the; Wan Setup; tab. The following screen will appear in the browser.; Submit All Changes; button at the bottom of the screen.; SPA is updating your configuration. Unit may reset.
- Page 8 – power supply back into the Adapter.; Talk on the phone and surf the web!; PPPoE Login information to access your DSL Internet service.
- Page 9 – Troubleshooting; If the yellow STAT light does not stop blinking:; 4 hours a day, 7 days a week
1
Cisco SPA 2100 Phone Adapter Installation Manual
Installation of the Cisco SPA 2100 Phone Adapter to NationPhone
Index
P. 1 Index, before you begin, and what is included
P.2 Installing the NationPhone Router & Phone Adapter SPA2100
P.3 Installing the NationPhone Router & Phone Adapter on Multiple Computers
P.4 About the NationPhone Router & Phone Adapter
P.5 Troubleshooting
P.6 DSL/PPPoE Set Up ( most cases when you have internet through you telephone company)
P.9 Troubleshooting for DSL/PPPoE Set Up
If you are experiencing issues with your service, please review these common troubleshooting
solutions.
If you need additional assistance please contact our Technical Support Center at 24 hours a day, 7
days a week.
Americas +1 888 744 8647
Overseas +1 781 613 8647
or
e-mail us at [email protected].
Getting Started
What’s included:
NationPhone Router & Phone Adapter SPA 2100
Ethernet Cable
AC Power Adapter
Equipment you will need:
Broadband Connection: DSL, cable modem, or other high-speed Internet connection
Router
(optional)
: To share your broadband connection with more than one device. A
router is not necessary if you only use one computer.
Traditional Analog Telephone
To use enhanced features, you will need:
Computer
Web Browser
BEFORE YOU BEGIN:
If you are using DSL service that requires a User Login and Password
entry in order to connect, please
review the following information
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installing the NationPhone Router & Phone Adapter SPA2100 1. Power off your DSL or cable modem and computer. 2. Insert an Ethernet cable into the WAN port. Connect the other end of an Ethernet cable into your DSL or cable modem. 3. Insert an end of another Ethernet cable into the LAN port. Con...
3 Installing the NationPhone Router & Phone Adapter on Multiple Computers 1. Power of your DSL or cable modem, router, and any devices connected to the router. 2. Insert an Ethernet cable into the WAN port. Connect the other end of the Ethernet cable into your DSL or cable modem. 3. Insert an en...
4 About the NationPhone Router & Phone Adapter The NationPhone Router & Phone Adapter enables you to connect your phones and either one or more computers to your broadband network. When connecting to a single computer, you do not need a router. BEFORE PROCEEDING : If you are using DSL that r...
