Cisco SPA 2100 - Manuals - manualsarea.com

Page 2 - Installing the NationPhone Router & Phone Adapter SPA2100; Power off your DSL or cable modem and computer.; You can now make calls!; Pick up the phone receiver and listen for a dial tone. If you do

2 Installing the NationPhone Router & Phone Adapter SPA2100 1. Power off your DSL or cable modem and computer. 2. Insert an Ethernet cable into the WAN port. Connect the other end of an Ethernet cable into your DSL or cable modem. 3. Insert an end of another Ethernet cable into the LAN port. Con...

Page 3 - light

3 Installing the NationPhone Router & Phone Adapter on Multiple Computers 1. Power of your DSL or cable modem, router, and any devices connected to the router. 2. Insert an Ethernet cable into the WAN port. Connect the other end of the Ethernet cable into your DSL or cable modem. 3. Insert an en...

Page 4 - About the NationPhone Router & Phone Adapter; BEFORE PROCEEDING

4 About the NationPhone Router & Phone Adapter The NationPhone Router & Phone Adapter enables you to connect your phones and either one or more computers to your broadband network. When connecting to a single computer, you do not need a router. BEFORE PROCEEDING : If you are using DSL that r...

Page 5 - No Dial Tone; Reboot your

5 Troubleshooting ISSUE SOLUTION No Dial Tone Check all connections to the NationPhone Router & Phone Adapter. Make sure that the green light on the NationPhone Router & Phone Adapter blinks only when the phone is off hook. If not, ensure that you have an Internet connection. Reboot your equ...

Page 6 - GO; button or hit Enter on your keyboard.

6 DSL/PPPoE Set Up Follow the steps below to setup the NationPhone Router & Phone Adapter for your DSL/PPPoE Internet connection. BEFORE YOU BEGIN : These steps are only needed if your DSL connection requires a User Login and Password entry in order to connect to your DSL service. If so, you mus...

Page 7 - the; Wan Setup; tab. The following screen will appear in the browser.; Submit All Changes; button at the bottom of the screen.; SPA is updating your configuration. Unit may reset.

7 6. Click the Wan Setup tab. The following screen will appear in the browser. 7. Select PPPOE from the drop down menu for Connection Type. 8. In the empty field to the right of "PPPoE Login Name" enter your DSL login I.D. provided to you by your DSL provider. 9. In the empty field to the ri...

Page 8 - power supply back into the Adapter.; Talk on the phone and surf the web!; PPPoE Login information to access your DSL Internet service.

8 You will be redirected to the configuration page in 5 seconds. If not, you can click HERE to return to the configuration page. 12. Close the browser. 13. Pull out the power supply plug from your NationPhone Router & Phone Adapter. Wait 10 seconds, and then plug the power supply back into the A...

Page 9 - Troubleshooting; If the yellow STAT light does not stop blinking:; 4 hours a day, 7 days a week

9 Troubleshooting If the Sipura Web Configuration page does not return to your browser after clicking the Submit All Changes button: 1. Unplug the power to the NationPhone Router and Phone Adapter. 2. Wait 10 seconds, and then plug the power back into the Adapter. 3. Repeat steps 3-15 above. If you ...