Cisco OL-9558-01 - Manual
Cisco OL-9558-01 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warning; Connecting the Router to Your Local Network
- Page 3 – Caution; Cisco Interface Cards Hardware Installation Guide; Regulatory Compliance
- Page 4 – Connecting the Router to the Local Network; Ethernet hub or switch
- Page 5 – Connecting Power to the Router; The power supply is designed to work with TN power systems.; Connect the attached power-supply cord to the power socket (; Connecting the Power Supply
- Page 6 – Connect the other end of the separate power cord to a power outlet.; Verifying Your Installation; PWR (front panel)—On when power is being supplied to the router.
- Page 7 – Optional Installation Procedures; Connecting a PC; Follow these steps to connect the router to a terminal or PC:
- Page 8 – Connecting the Console Cable to the Router; Blue console cable
- Page 9 – Connecting a Modem; Connecting a Modem to the Router; Console cable
- Page 10 – Connect the DB-25 end of the adapter to the modem.; Stacking the Router; Note
- Page 11 – Assembling Stacking Clip and Fastener; Place the clip on top of the lower device, as shown in; Push plastic fastener
- Page 12 – Snap the router onto the clip by pushing it down.
- Page 13 – Follow these steps to unstack the router from another device:; Unstacking the Router; Slide the clip and router toward you.
C H A P T E R
2-1
Cisco 815 Integrated Services Router Hardware Installation Guide
OL-9558-01
2
Installation
This chapter provides procedures for installing the Cisco 815 integrated services
router and includes the following sections:
•
•
Connecting the Router to Your Local Network
•
Connecting Power to the Router
•
•
Optional Installation Procedures
Before Installing the Router
The Cisco 815 integrated services router is shipped ready for desktop mounting.
Before you connect it to the power and network, simply set the router on a
desktop, shelf, or other flat surface.
Be sure to read the safety information in the
Regulatory Compliance and Safety
Information for Cisco 800 Series and SOHO Series Routers
Warning
Read the installation instructions before you connect the system to its power
source.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Chapter 2 Installation Connecting the Router to Your Local Network 2-2 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Warning Before working on equipment that is connected to power lines, remove jewelry(including rings, necklaces, and watches). Metal objects will heat up...
2-3 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Chapter 2 Installation Connecting the Router to Your Local Network Caution Do not connect a WAN cable to the card until you have completed the installationprocedure. Note For details about specific WAN interface cards (W...
Chapter 2 Installation Connecting the Router to Your Local Network 2-4 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Figure 2-1 Connecting the Router to the Local Network Step 2 Connect the other end of the cable to a network port on the hub or switch. 1 10/100 Ethernet...
