Cisco OL-9558-01 - Manuals - manualsarea.com

Page 2 - Warning; Connecting the Router to Your Local Network

Chapter 2 Installation Connecting the Router to Your Local Network 2-2 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Warning Before working on equipment that is connected to power lines, remove jewelry(including rings, necklaces, and watches). Metal objects will heat up...

Page 3 - Caution; Cisco Interface Cards Hardware Installation Guide; Regulatory Compliance

2-3 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Chapter 2 Installation Connecting the Router to Your Local Network Caution Do not connect a WAN cable to the card until you have completed the installationprocedure. Note For details about specific WAN interface cards (W...

Page 4 - Connecting the Router to the Local Network; Ethernet hub or switch

Chapter 2 Installation Connecting the Router to Your Local Network 2-4 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Figure 2-1 Connecting the Router to the Local Network Step 2 Connect the other end of the cable to a network port on the hub or switch. 1 10/100 Ethernet...

Page 5 - Connecting Power to the Router; The power supply is designed to work with TN power systems.; Connect the attached power-supply cord to the power socket (; Connecting the Power Supply

2-5 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Chapter 2 Installation Connecting Power to the Router Connecting Power to the Router Read the following warnings before connecting the router to power. Warning The power supply is designed to work with TN power systems. ...

Page 6 - Connect the other end of the separate power cord to a power outlet.; Verifying Your Installation; PWR (front panel)—On when power is being supplied to the router.

Chapter 2 Installation Verifying Your Installation 2-6 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Step 2 Connect one end of the separate power cord to the socket on the power supply. Step 3 Connect the other end of the separate power cord to a power outlet. Step 4 Pr...

Page 7 - Optional Installation Procedures; Connecting a PC; Follow these steps to connect the router to a terminal or PC:

2-7 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Chapter 2 Installation Optional Installation Procedures Optional Installation Procedures This section describes some installation procedures that you might or might notuse, depending on your site and on how you are confi...

Page 8 - Connecting the Console Cable to the Router; Blue console cable

Chapter 2 Installation Optional Installation Procedures 2-8 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Figure 2-3 Connecting the Console Cable to the Router Step 2 Connect the DB-9 end of the console cable to the console port (also called theserial port) on your PC. ...

Page 9 - Connecting a Modem; Connecting a Modem to the Router; Console cable

2-9 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Chapter 2 Installation Optional Installation Procedures Connecting a Modem When a modem is connected to the auxiliary port, a remote user can dial in to therouter and configure it. You can use the console cable provided ...

Page 10 - Connect the DB-25 end of the adapter to the modem.; Stacking the Router; Note

Chapter 2 Installation Optional Installation Procedures 2-10 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Step 2 Connect the DB-9 end of the cable to the DB-9 end of the DB-9-to-DB-25 adapter. Step 3 Connect the DB-25 end of the adapter to the modem. Stacking the Route...

Page 11 - Assembling Stacking Clip and Fastener; Place the clip on top of the lower device, as shown in; Push plastic fastener

2-11 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Chapter 2 Installation Optional Installation Procedures Figure 2-5 Assembling Stacking Clip and Fastener After assembling the clip and fastener, follow these steps to stack the router withanother device: Step 1 Place th...

Page 12 - Snap the router onto the clip by pushing it down.

Chapter 2 Installation Optional Installation Procedures 2-12 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Figure 2-6 Stacking the Router (Back View) Step 2 Position the router onto the clip so that the back hooks fit over the edge of therouter. Step 3 Position the plas...

Page 13 - Follow these steps to unstack the router from another device:; Unstacking the Router; Slide the clip and router toward you.

2-13 Cisco 815 Integrated Services Router Hardware Installation Guide OL-9558-01 Chapter 2 Installation Optional Installation Procedures Unstacking the Router Follow these steps to unstack the router from another device: Step 1 Press up on the tab over the center of the lower device to release the c...