Page 3 - C O N T E N T S; Preface; Product Overview; Installation; Express Setup
1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 C O N T E N T S Preface iii Purpose iii Document Conventions iii Related Publications iv Obtaining Documentation and Submitting a Service Request iv C H A P T E R 1 Product Overview 1-1 Switch Models 1-1 P...
Page 4 - Managing the Switch Module; Cable and Connectors
Contents 2 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Troubleshooting Express Setup 3-5 Resetting the Switch Module 3-5 C H A P T E R 4 Managing the Switch Module 4-1 Using the Device Manager 4-1 Cisco Configuration Professional 4-1 Other Management ...
Page 5 - Purpose
iii Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Preface Purpose This guide describes the hardware features of the Cisco Connected Grid Ethernet Switch Module Interface Card (switch module). It describes how to install the switch module in the Cisco 20...
Page 6 - iv; Related Publications; Obtaining Documentation and Submitting a Service Request
iv Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Related Publications Note Before installing, configuring, or upgrading the switch, see the release notes on Cisco.com for the latest information. • Release Notes for Cisco 2520 Connected Grid Switch and E...
Page 7 - Switch Models; Mode
C H A P T E R 1-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 1 Product Overview This chapter describes the Cisco Connected Grid Ethernet Switch Module Interface Card, hereafter referred to as the switch module. The switch deployed together with the C...
Page 8 - Ports; Port Locations
1-2 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports Ports • Port Locations, page 1-2 • Port Labeling, page 1-3 • 10/100BASE-T Ports, page 1-4 • PoE and PoE+ Ports, page 1-4 • 10/100 Mb/s SFP Module Slots, page 1-5 • 100/10...
Page 9 - Port Labeling; Port
1-3 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports Figure 1-2 GRWIC-D-ES-2S-8PC (Copper Model) Port Labeling The port labeling for the switch modules is described in Table 1-2 and Table 1-3 . 1 10/100BASET-T ports 2 Dual-...
Page 11 - Dual-Purpose Gigabit Ethernet Ports
1-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports – power reservation – per-port power policing On the GRWIC-D-ES-2S-8PC model (Copper model), the first four 10/100BASE-T ports (FE0/1, FE0/2, FE0/3, FE0/4) are PoE+ ports...
Page 12 - Supported SFPs; show inventory; Type of SFP Module
1-6 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports Supported SFPs Table 1-4 describes the supported SFP modules. Note The following SFP module slot points should be noted: - The four 100 Mb/s FE SFP module slots of the Fi...
Page 13 - LEDs; LED
1-7 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview LEDs LEDs This section describes the location and function of the LEDs on the switch module. Figure 1-3 GRWIC-D-ES-6S Switch Module (SFP Fiber Model) LEDs Table 1-5 GRWIC-D-ES-...
Page 15 - Router Compact Flash Memory Cards
1-9 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Router Compact Flash Memory Cards Router Compact Flash Memory Cards Compact flash cards can help you configure new or replacement routers, and to recover the configuration of a...
Page 16 - Item
1-10 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Router Compact Flash Memory Cards For more information on the Swap Drive feature, see: http://www.cisco.com/en/US/docs/routers/connectedgrid/cgr2010/software/15_2_2_t/cgr2010_...
Page 17 - Installation Warning Statements
C H A P T E R 2-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 2 Installation This section describes how to install the switch module in Cisco CGR 2010 routers. The switch module occupies two of four slots on the I/O side of the router. This chapter in...
Page 21 - Connecting to the Network; Connecting the Copper Switch Module
2-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 2 Installation Connecting to the Network Figure 2-4 Switch Module Installed in the CGR 2010 Router Connecting to the Network • Connecting the Copper Switch Module, page 2-5 • Connecting the Fiber...
Page 22 - Connecting the Fiber Switch Module
2-6 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 2 Installation Connecting to the Network Figure 2-5 Connecting the Copper Model to the Network Step 2 Connect the other end of the cable to the RJ-45 connector of the target device. Connecting th...
Page 23 - Removing the Switch Module
2-7 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 2 Installation Removing the Switch Module Figure 2-6 Connecting the SFP Fiber Model to the Network Step 2 Connect the other end of the cable to the standard LC-type optical connector on the targe...
Page 25 - System Requirements
C H A P T E R 3-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 3 Express Setup You access the switch module via the host CGR 2010 router. For more information, see Accessing the Switch Module, page 4-2 . To exchange and monitor control messages between...
Page 28 - Submit; Field; Static
3-4 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 3 Express Setup Express Setup Step 3 Enter the Network Settings values: Step 4 Enter the Optional Settings now, or enter them later using the Device Manager interface. You can enter other adminis...
Page 29 - Problem
3-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 3 Express Setup Troubleshooting Express Setup • Confirm that the computer that you are using to access the switch module has network connectivity by connecting to a web server in your network. If...
Page 31 - Using the Device Manager; Enter; Cisco Configuration Professional
C H A P T E R 4-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 4 Managing the Switch Module After completing Express Setup and installing the switch module in your network, you can use these options for further configuration: • Using the Device Manager...
Page 32 - Download Software; Finish; Other Management Options; Interface
4-2 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Other Management Options Note You must be a registered Cisco.com user, but you need no other access privileges. Step 2 Click Download Software . Step 3 Select the lat...
Page 33 - Disconnecting from the Switch Module; Command; session
4-3 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Accessing the Switch Module The service-module gigabitEthernet 0/x/0 session command is the privileged EXEC mode command used to console into the Ethernet switch modu...
Page 34 - Connecting Devices to the Switch Module
4-4 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module Connecting Devices to the Switch Module This section describes how to connect various devices to the switch module ports. Tip ...
Page 35 - SFP Module Slots
4-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module Figure 4-1 RJ-45 Ports Step 2 Connect the cable to the RJ-45 port on the other device. Note The automatic medium-dependent int...
Page 37 - Dual-Purpose Port with RJ-45 and SFP Connectors; system mtu jumbo
4-7 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module For detailed instructions on installing, removing, and connecting to SFP modules, see the SFP module documentation. Dual-Purpo...
Page 39 - Verifying Port Connectivity
4-9 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module Figure 4-5 Dual-Purpose Connectors Verifying Port Connectivity After you connect the switch module port and another device, th...
Page 41 - Connector Specifications; SFP Module Connectors
A-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 A P P E N D I X A Cable and Connectors • Connector Specifications, page A-1 • Cables and Adapters, page A-2 Connector Specifications • 10/100BASE-T Ports, page A-1 • SFP Module Connectors, page A-1 • Dua...
Page 42 - Cables and Adapters; SFP Module Cables
A-2 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Appendix A Cable and Connectors Cables and Adapters Figure A-2 Fiber-Optic SFP Module LC Connector Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare in...
Page 44 - Cable Pinouts
A-4 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Appendix A Cable and Connectors Cables and Adapters Note When the fiber-optic cable span is less than 15.43 miles (25 km), insert a 5-decibel (dB) or 10-dB inline optical attenuator between the fiber-opt...
