Cisco OL-23421-02 - Manuals

iv Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Related Publications Note Before installing, configuring, or upgrading the switch, see the release notes on Cisco.com for the latest information. • Release Notes for Cisco 2520 Connected Grid Switch and E...

C H A P T E R 1-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 1 Product Overview This chapter describes the Cisco Connected Grid Ethernet Switch Module Interface Card, hereafter referred to as the switch module. The switch deployed together with the C...

1-2 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports Ports • Port Locations, page 1-2 • Port Labeling, page 1-3 • 10/100BASE-T Ports, page 1-4 • PoE and PoE+ Ports, page 1-4 • 10/100 Mb/s SFP Module Slots, page 1-5 • 100/10...

1-3 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports Figure 1-2 GRWIC-D-ES-2S-8PC (Copper Model) Port Labeling The port labeling for the switch modules is described in Table 1-2 and Table 1-3 . 1 10/100BASET-T ports 2 Dual-...

1-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports – power reservation – per-port power policing On the GRWIC-D-ES-2S-8PC model (Copper model), the first four 10/100BASE-T ports (FE0/1, FE0/2, FE0/3, FE0/4) are PoE+ ports...

1-6 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Ports Supported SFPs Table 1-4 describes the supported SFP modules. Note The following SFP module slot points should be noted: - The four 100 Mb/s FE SFP module slots of the Fi...

1-7 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview LEDs LEDs This section describes the location and function of the LEDs on the switch module. Figure 1-3 GRWIC-D-ES-6S Switch Module (SFP Fiber Model) LEDs Table 1-5 GRWIC-D-ES-...

1-9 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Router Compact Flash Memory Cards Router Compact Flash Memory Cards Compact flash cards can help you configure new or replacement routers, and to recover the configuration of a...

1-10 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 1 Product Overview Router Compact Flash Memory Cards For more information on the Swap Drive feature, see: http://www.cisco.com/en/US/docs/routers/connectedgrid/cgr2010/software/15_2_2_t/cgr2010_...

C H A P T E R 2-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 2 Installation This section describes how to install the switch module in Cisco CGR 2010 routers. The switch module occupies two of four slots on the I/O side of the router. This chapter in...

2-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 2 Installation Connecting to the Network Figure 2-4 Switch Module Installed in the CGR 2010 Router Connecting to the Network • Connecting the Copper Switch Module, page 2-5 • Connecting the Fiber...

2-6 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 2 Installation Connecting to the Network Figure 2-5 Connecting the Copper Model to the Network Step 2 Connect the other end of the cable to the RJ-45 connector of the target device. Connecting th...

2-7 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 2 Installation Removing the Switch Module Figure 2-6 Connecting the SFP Fiber Model to the Network Step 2 Connect the other end of the cable to the standard LC-type optical connector on the targe...

C H A P T E R 3-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 3 Express Setup You access the switch module via the host CGR 2010 router. For more information, see Accessing the Switch Module, page 4-2 . To exchange and monitor control messages between...

3-4 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 3 Express Setup Express Setup Step 3 Enter the Network Settings values: Step 4 Enter the Optional Settings now, or enter them later using the Device Manager interface. You can enter other adminis...

3-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 3 Express Setup Troubleshooting Express Setup • Confirm that the computer that you are using to access the switch module has network connectivity by connecting to a web server in your network. If...

C H A P T E R 4-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 4 Managing the Switch Module After completing Express Setup and installing the switch module in your network, you can use these options for further configuration: • Using the Device Manager...

4-2 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Other Management Options Note You must be a registered Cisco.com user, but you need no other access privileges. Step 2 Click Download Software . Step 3 Select the lat...

4-3 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Accessing the Switch Module The service-module gigabitEthernet 0/x/0 session command is the privileged EXEC mode command used to console into the Ethernet switch modu...

4-4 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module Connecting Devices to the Switch Module This section describes how to connect various devices to the switch module ports. Tip ...

4-5 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module Figure 4-1 RJ-45 Ports Step 2 Connect the cable to the RJ-45 port on the other device. Note The automatic medium-dependent int...

4-7 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module For detailed instructions on installing, removing, and connecting to SFP modules, see the SFP module documentation. Dual-Purpo...

4-9 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Chapter 4 Managing the Switch Module Connecting Devices to the Switch Module Figure 4-5 Dual-Purpose Connectors Verifying Port Connectivity After you connect the switch module port and another device, th...

A-1 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 A P P E N D I X A Cable and Connectors • Connector Specifications, page A-1 • Cables and Adapters, page A-2 Connector Specifications • 10/100BASE-T Ports, page A-1 • SFP Module Connectors, page A-1 • Dua...

A-2 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Appendix A Cable and Connectors Cables and Adapters Figure A-2 Fiber-Optic SFP Module LC Connector Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare in...

A-4 Cisco Connected Grid Ethernet Switch Module Interface Card Getting Started Guide OL-23421-02 Appendix A Cable and Connectors Cables and Adapters Note When the fiber-optic cable span is less than 15.43 miles (25 km), insert a 5-decibel (dB) or 10-dB inline optical attenuator between the fiber-opt...