Cisco DC-145 - Manual
Cisco DC-145 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Automatically Configuring an External Modem; default—Generic Hayes interface external modem
- Page 3 – modemcap entry; Using the Modem Autoconfigure; Using the; modemcap edit; modem autoconfigure discovery
- Page 4 – Manually Configuring an External Modem; Timesaver; at
- Page 5 – Supporting Dial-In Modems
- Page 6 – Note; and; line configuration command with newer modems, the; modem
- Page 7 – Testing the Modem Connection
- Page 8 – Managing Telnet Sessions; reverse; ip host; “Configuring Asynchronous Rotary Line Queueing”
- Page 9 – Suspending Telnet Sessions:; show users; value; disconnect
- Page 10 – Problem
- Page 11 – Checking Other Modem Settings; bis
DC-145
Cisco IOS Dial Technologies Configuration Guide
Configuring and Managing External Modems
This chapter describes how to configure externally connected modems. These tasks are presented in the
following main sections:
•
External Modems on Low-End Access Servers
•
Automatically Configuring an External Modem
•
Manually Configuring an External Modem
•
•
•
•
•
To identify the hardware platform or software image information associated with a feature, use the
Feature Navigator on Cisco.com to search for information about the feature or refer to the software
release notes for a specific release. For more information, see the “Identifying Supported Platforms”
section in the “Using Cisco IOS Software” chapter.
For a complete description of the modem support commands in this chapter, refer to the
Cisco IOS Dial
Technologies Command Reference
. To locate documentation of other commands that appear in this
chapter, use the command reference master index or search online.
External Modems on Low-End Access Servers
Some of the Cisco lower-end access servers, such as the Cisco AS2511-RJ shown in
, have
cable connections to external modems. The asynchronous interfaces and lines are inside the access
server.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Configuring and Managing External Modems Automatically Configuring an External Modem DC-146 Cisco IOS Dial Technologies Configuration Guide Figure 23 Cisco AS2511-RJ Access Server When you configure modems to function with your access server, you must provide initialization strings and other setting...
Configuring and Managing External Modems Automatically Configuring an External Modem DC-147 Cisco IOS Dial Technologies Configuration Guide Enter these modemcap names with the modemcap entry command. If your modem is not on this list and if you know what modem initialization string you need to use w...
Configuring and Managing External Modems Manually Configuring an External Modem DC-148 Cisco IOS Dial Technologies Configuration Guide Jan 16 18:16:18.324: TTY33: Detected modem speed 115200 Jan 16 18:16:18.324: TTY33: Done with modem configuration Jan 16 18:16:18.324: TTY34: Modem configuration suc...
