Cisco DC-145 - Manuals - manualsarea.com

Page 2 - Automatically Configuring an External Modem; default—Generic Hayes interface external modem

Configuring and Managing External Modems Automatically Configuring an External Modem DC-146 Cisco IOS Dial Technologies Configuration Guide Figure 23 Cisco AS2511-RJ Access Server When you configure modems to function with your access server, you must provide initialization strings and other setting...

Page 3 - modemcap entry; Using the Modem Autoconfigure; Using the; modemcap edit; modem autoconfigure discovery

Configuring and Managing External Modems Automatically Configuring an External Modem DC-147 Cisco IOS Dial Technologies Configuration Guide Enter these modemcap names with the modemcap entry command. If your modem is not on this list and if you know what modem initialization string you need to use w...

Page 4 - Manually Configuring an External Modem; Timesaver; at

Configuring and Managing External Modems Manually Configuring an External Modem DC-148 Cisco IOS Dial Technologies Configuration Guide Jan 16 18:16:18.324: TTY33: Detected modem speed 115200 Jan 16 18:16:18.324: TTY33: Done with modem configuration Jan 16 18:16:18.324: TTY34: Modem configuration suc...

Page 5 - Supporting Dial-In Modems

Configuring and Managing External Modems Supporting Dial-In Modems DC-149 Cisco IOS Dial Technologies Configuration Guide Modems differ in the method that they use to lock the EIA/TIA-232 (serial) port speed. In the modem documentation, vendors use terms such as port-rate adjust, speed conversion, o...

Page 6 - Note; and; line configuration command with newer modems, the; modem

Configuring and Managing External Modems Supporting Dial-In Modems DC-150 Cisco IOS Dial Technologies Configuration Guide Figure 24 EXEC Creation on a Line Configured for Modem Dial-In Note The modem callin and modem cts-required line configuration commands are useful for SLIP operation. These comma...

Page 7 - Testing the Modem Connection

Configuring and Managing External Modems Testing the Modem Connection DC-151 Cisco IOS Dial Technologies Configuration Guide Testing the Modem Connection To test the connection, send the modem the AT command to request its attention. The modem should respond with “OK.” For example: at OK If the mode...

Page 8 - Managing Telnet Sessions; reverse; ip host; “Configuring Asynchronous Rotary Line Queueing”

Configuring and Managing External Modems Managing Telnet Sessions DC-152 Cisco IOS Dial Technologies Configuration Guide Step 4 The speeds of the modem and the access server are likely to be different. If so, switch off the modem, and then switch it back on. This action should change the speed of th...

Page 9 - Suspending Telnet Sessions:; show users; value; disconnect

Configuring and Managing External Modems Managing Telnet Sessions DC-153 Cisco IOS Dial Technologies Configuration Guide Suspending Telnet Sessions: When you are connected to an external modem, the direct Telnet session must be terminated before the line can accept incoming calls. If you do not term...

Page 10 - Problem

Configuring and Managing External Modems Modem Troubleshooting Tips DC-154 Cisco IOS Dial Technologies Configuration Guide Modem Troubleshooting Tips Table 14 contains troubleshooting tips on modem access and control. Table 14 Modem Troubleshooting Tips Problem Likely Cause Connection refused. Someo...

Page 11 - Checking Other Modem Settings; bis

Configuring and Managing External Modems Checking Other Modem Settings DC-155 Cisco IOS Dial Technologies Configuration Guide Checking Other Modem Settings This section defines other settings that might be needed or desirable, depending on your modem. Error correction can be negotiated between two m...