Cisco Cisco ONS 15454 SDH - Manual

Cisco Cisco ONS 15454 SDH

Cisco Cisco ONS 15454 SDH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
Page: / 34

Table of Contents:

  • Page 2 – NTP-D24 Verify Card Installation; Purpose; Security Level
  • Page 4 – NTP-D30 Create Users and Assign Security; DLP-D74 Create a New User—Single Node
  • Page 5 – DLP-D75 Create a New User—Multiple Nodes
  • Page 7 – In the confirmation dialog box, click Yes.
  • Page 8 – NTP-D279 Set Power Monitor Thresholds
  • Page 9 – NTP-D169 Set Up CTC Network Access
  • Page 10 – DLP-D249 Provision IP Settings
  • Page 11 – Click Yes on the confirmation dialog box.
  • Page 12 – Reboot Activity
  • Page 14 – Press the Status button to choose the Save Configuration option.
  • Page 15 – DLP-D65 Create a Static Route
  • Page 16 – DLP-D250 Set Up or Change Open Shortest Path First Protocol
  • Page 18 – DLP-D251 Set Up or Change Routing Information Protocol
  • Page 19 – NTP-D27 Set Up the ONS 15454 SDH for Firewall Access
  • Page 20 – DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH
  • Page 21 – Port
  • Page 22 – DLP-D68 Provision the IIOP Listener Port on the CTC Computer; NTP-D28 Set Up Timing
  • Page 23 – DLP-D69 Set Up External or Line Timing
  • Page 25 – DLP-D70 Set Up Internal Timing
  • Page 26 – NTP-D170 Create Protection Groups
  • Page 27 – Type
  • Page 31 – DLP-D252 Create a Y-Cable Protection Group
Loading the manual

C H A P T E R

4-1

Cisco ONS 15454 SDH Procedure Guide, R4.6

January 2004

4

Turn Up Node

This chapter explains how to provision a single Cisco ONS 15454 SDH node and turn it up for service,
including node name, date and time, timing references, network attributes such as IP address and default
router, users and user security, and card protection groups.

If you are provisioning an ONS 15454 SDH for dense wavelength division multiplexing (DWDM) or as
a hybrid node (DWDM and TDM), you will not complete some procedures until directed to do so in

Chapter 5, “Turn Up a DWDM Node.”

These procedures are identified in the procedures list in the

following section.

Before You Begin

Complete the procedures applicable to your site plan from the following chapters:

•

Chapter 1, “Install the Shelf and FMECs”

•

Chapter 2, “Install Cards and Fiber-Optic Cable”

•

Chapter 3, “Connect the PC and Log into the GUI”

This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).

1.

NTP-D24 Verify Card Installation, page 4-2

—Complete this procedure first.

2.

NTP-D30 Create Users and Assign Security, page 4-4

—Complete this procedure to create Cisco

Transport Controller (CTC) users and assign their security levels.

3.

NTP-D25 Set Up Name, Date, Time, and Contact Information, page 4-6

—Continue with this

procedure to set the node name, date, time, location, and contact information.

4.

NTP-D279 Set Power Monitor Thresholds, page 4-8

—Continue with this procedure to set the node

battery power thresholds.

5.

NTP-D169 Set Up CTC Network Access, page 4-9

—Continue with this procedure to provision the

IP address, default router, subnet mask, and network configuration settings.

6.

NTP-D27 Set Up the ONS 15454 SDH for Firewall Access, page 4-19

—Continue with this

procedure if the ONS 15454 SDH will be accessed behind firewalls.

7.

NTP-D28 Set Up Timing, page 4-22

—Continue with this procedure to set up the node’s SONET

timing references. If you are turning up a DWDM or hybrid node, do not complete this procedure
until directed to do so in

Chapter 5, “Turn Up a DWDM Node.”

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - NTP-D24 Verify Card Installation; Purpose; Security Level

4-2 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D24 Verify Card Installation 8. NTP-D170 Create Protection Groups, page 4-26 —Complete this procedure, as needed, to set up 1:1, 1:N, 1+1, or Y-cable protection groups for ONS 15454 SDH electrical and optical cards...

Page 4 - NTP-D30 Create Users and Assign Security; DLP-D74 Create a New User—Single Node

4-4 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node NTP-D30 Create Users and Assign Security NTP-D30 Create Users and Assign Security Step 1 Complete the “DLP-D60 Log into CTC” task on page 3-24 at the node where you want to create users. If you are already logged in, c...

Page 5 - DLP-D75 Create a New User—Multiple Nodes

4-5 Cisco ONS 15454 SDH Procedure Guide, R4.6 January 2004 Chapter 4 Turn Up Node DLP-D75 Create a New User—Multiple Nodes • Password—Type the user password. The password must be a minimum of six and a maximum of20 alphanumeric (a-z, A-Z, 0-9) and special (+, #, %) characters, where at least two cha...

Other Cisco Models

All Cisco Other