Cisco Cisco 10000 ESR - Manual

Cisco Cisco 10000 ESR

Cisco Cisco 10000 ESR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 2 – Product Description; Figure 1
  • Page 3 – Prerequisites and Preparation; Safety Guidelines; Safety Warnings
  • Page 4 – Warning; Installation Guidelines; Required Tools and Equipment; You need the following tools and equipment to install an AC PEM:
  • Page 5 – Adding or Replacing an AC PEM; Removing the Front Cover, page 5; Removing the Front Cover; Figure 2
  • Page 6 – Figure 3; Continue installing or replacing the AC PEM:
  • Page 7 – Installing a Second AC PEM; Figure 4; ESD
  • Page 8 – Figure 5; Captive
  • Page 9 – Figure 6
  • Page 10 – Figure 7; Plug the facility AC input power cord into a power receptacle.
  • Page 11 – The (green) power LED on the PEM lights indicating that the PEM is on.; Figure 8; Replace the front cover.
  • Page 12 – Replacing an AC PEM; Use the following procedure to replace an AC PEM.; Figure 9
  • Page 13 – Caution; Setting the AC Power Switch to the Off Position
  • Page 14 – AC Power Cord Connectors in Canoes
  • Page 15 – Removing an AC PEM
  • Page 16 – Installing an AC PEM
  • Page 18 – Setting the AC Power Switch to the On Position
  • Page 19 – Troubleshooting the Installation; Table 1 contains troubleshooting information for the AC PEM:; Table 1; Symptom; System fails to power on
  • Page 20 – FCC Class A Compliance; Move the equipment farther away from the television or radio.; Cisco Connection Online
  • Page 21 – product
  • Page 22 – Feedback; in the toolbar and select; Documentation; to send it to Cisco.
Loading the manual

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Copyright © 20 00. Cisco Systems, Inc. All rights reserved.

78-10832-01

Cisco 10000 ESR
AC Power Entry Module Installation

This publication contains instructions for installing the AC Power Entry Module
(PEM) in the Cisco 10000 Edge Services Router (ESR). If you are not familiar
with the Cisco 10000 router, see the

Cisco 10000 ESR System Description,

and

the

Cisco 10000 ESR Hardware Installation Guide

for additional information.

Contents

The following sections are included in this configuration guide:

•

Product Description, page 2

•

Prerequisites and Preparation, page 3

•

Installation Guidelines, page 4

•

Adding or Replacing an AC PEM, page 5

•

FCC Class A Compliance, page 20

•

Cisco Connection Online, page 20

•

Documentation CD-ROM, page 22

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Product Description; Figure 1

Product Description 2 Cisco 10000 ESR AC Power Entry Module Installation 78-10832-01 Product Description The AC PEM provides power conversion directly from the facility VAC input power (100 VAC to 240 VAC) to the –48V VDC used internally by the system (see Figure 1). AC power is delivered to the AC ...

Page 3 - Prerequisites and Preparation; Safety Guidelines; Safety Warnings

3 Cisco 10000 ESR AC Power Entry Module Installation 78-10832-01 Prerequisites and Preparation Prerequisites and Preparation Before you perform any of the procedures in this guide, Cisco recommends that you: • Read the safety guidelines in the next section and review the electrical safety and ESD-pr...

Page 4 - Warning; Installation Guidelines; Required Tools and Equipment; You need the following tools and equipment to install an AC PEM:

Installation Guidelines 4 Cisco 10000 ESR AC Power Entry Module Installation 78-10832-01 Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with ...

Other Cisco Models

All Cisco Other