Cisco 8110 - Manual
Cisco 8110 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Basic Hardware Features; Power Supply and Fuses; Cable Connections; Connecting Optical Cables
- Page 3 – Connecting Electrical Signal Cables; Connecting the Terminal
- Page 4 – CIT Pinout; LIM Modules; Installing a Line Interface / Compact Subscriber Module (LIM)
- Page 5 – Replacing Modules; Connecting the External Timing
- Page 6 – Connecting the External alarms
- Page 7 – Alarms Pinout; Removable Power Supply; Unpacking the Power Supply
- Page 9 – Power Supply Installation; Installing a Power Supply
- Page 10 – Removing a Power Supply; Power Supply LEDs; General Operating Procedures
C H A P T E R
3-1
Cisco 8110 Broadband Network Termination Unit User Guide
78-11666-01
3
Installation
This chapter describes the installation procedure for the Cisco 8110 Broadband Termination Unit. It
contains the following topics:
•
Unpacking the System, page 3-1
•
Basic Hardware Features, page 3-2
•
Removable Power Supply, page 3-7
•
General Operating Procedures, page 3-10
Unpacking the System
Upon receipt of, and before opening the Cisco 8110 unit, inspect the package for any damage that might
have occurred during shipping. If the package shows any signs of external damage or rough handling,
notify your carrier's representative.
When unpacking the Cisco 8110 be sure to keep all original packing materials. They might be needed
for storing, transporting, or returning the product
Note
All products returned to Cisco , under warranty, must be packed in their original packing
materials.
A complete inventory should be carried out before any power is applied to the unit. The
Cisco 8110 package should include the following:
•
Cisco 8110 unit
•
Rack-mount brackets
•
Serial cable
•
A CDROM containing:
–
Release Notes
–
Cisco 8110 Installation Manual
–
Cisco 8110 User’s Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3-2 Cisco 8110 Broadband Network Termination Unit User Guide 78-11666-01 Chapter 3 Installation Basic Hardware Features Basic Hardware Features The unit can be fitted into a standard 19” rack or as a desktop and is 2.6” (1.5U high). For rackmounting, the unit is simply screwed to the sides of the ra...
3-3 Cisco 8110 Broadband Network Termination Unit User Guide 78-11666-01 Chapter 3 Installation Basic Hardware Features Step 3 Snap the other end of the cable into the ATM switch or other ATM equipment. Be sure that each cableconnects to Tx on one end and Rx on the other. Connecting Electrical Signa...
3-4 Cisco 8110 Broadband Network Termination Unit User Guide 78-11666-01 Chapter 3 Installation Basic Hardware Features CIT Pinout Table 3-1 shows the serial port pinout configuration. LIM Modules Caution The T1/E1 and T3/E3 connections are restricted to intra-building use only. Do not connectto exp...
