Chief TPP - Manual
Chief TPP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT WARNINGS AND CAUTIONS!; CAUTION; sponding instructions.; TOOLS REQUIRED FOR INSTALLATION; Socket set with extension; CONTENTS
- Page 3 – PARTS
- Page 4 – TPP INSTALLATION; Assembly; WARNING: It is the responsibility of the installer to verify that
- Page 5 – Figure 4. Vertical Tilt Shown without Back Plate for Clarity
- Page 6 – Mount the Display; WARNING: Make sure the flag securing the display is com-; If the flag; WARNING: Watch for pinch points. Do not put your fingers
- Page 7 – Remove the Display; Using two people, slide the display up and out of the TPP.
Truss
Pitch-Adjustable (TPP) Mount
BEFORE YOU BEGIN
•
WARNING: TO PREVENT PERSONAL INJURY, THOROUGHLY STUDY ALL INSTRUCTIONS AND ILLUS-
TRATIONS BEFORE YOU BEGIN TO INSTALL THE UNIT. PAY PARTICULAR ATTENTION TO THE “IMPOR-
TANT WARNINGS AND CAUTIONS” ON PAGE 1.
•
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the unit. Pay particular attention to the
“IMPORTANT WARNINGS AND CAUTIONS” on Page 1.
•
The maximum weight to be installed on the TPP is 150 pounds (68.04 Kg).
•
If you have any questions about this assembly, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
I N S T R U C T I O N M A N U A L
The Truss Pitch-Adjustable (TPP) mount is a perfect
solution exhibit, retail and digital signage applications.
The mount is quick, easy and versatile.
The TPP accommodates a large range of truss dimen-
sions (up to 14” O.D.), includes security options and pro-
vides flexible feature to achieve a custom installation
installation. The exclusive Q-Latch™ Mounting System
secures the LArge Flat Panel Display with a lockable
latch to confirm mount stability and integrated security
allows the display to be locked to the mount by adding a
padlock.
Your display can be mounted portrait or landscape and
four pitch adjustments, up or down, are available as pre-
set, locking positions (0, 5, 10 or 15 degrees).
LOGO
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY
SAVAGE, MINNESOTA 55378 USA
PART NO. 8804-000010 (Rev. B)
©
2003 Chief Manufacturing
www.chiefmfg.com
Printed in USA 05-04
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Instruction Manual TPP 1 IMPORTANT WARNINGS AND CAUTIONS! • WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. • CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- spon...
2 Instruction Manual TPP (1) PLATE, back (1) SCREW, pan head, 10-24 (1) PLATE, assembly, pitch-adjustable (4) SCREW, cap, hex head, 5/16-18 X 1/2” (1) PLATE, face (2) NUT, Stover locknut, 3/8-16 (1) FLAG, latching (1) SPACER, Nylon, .38 X .194 X .032” (1) NUT, Nylock, 10-24 (2) WASHER, flat, 3/8” (3...
Instruction Manual TPP 3 INSPECT THE MOUNT BEFORE INSTALLING IMPORTANT: Before installing the mount, make sure it has not been damaged during shipping. 1. Carefully inspect the mount for shipping damage. If any dam-age is apparent, call your carrier claims agent and do not con-tinue with the install...
