Chief KSA-1004 - Manual
Chief KSA-1004 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS; follow the corresponding instructions.
- Page 3 – PARTS; Figure 1. Lift Arm Installation Drawing; PARTS LIST; Table 1. Lift Arm Parts
- Page 4 – INSTALLATION; Removing the Display from the Mount; Display Mount Parts — Typical
- Page 5 – Installing the Lift Arm; To install the lift arm, perform the following procedures:; Installing base end of lift arm; Locate the tension adjustment bolt on the lift arm; Installing display end of lift arm; Figure 3. Installing Lift Arm
- Page 6 – Adjusting Lateral Movement
CHIEF MANUFACTURING INC.
8832-000041 Rev . F
1-800-582-6480
952-894-6280 FAX 952-894-6918
©2007 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
03/07
I N S T A L L A T I O N I N S T R U C T I O N S
Small Flat Panel
Lift Arm
FSA-1004 and KSA-1004
BEFORE YOU BEGIN
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Precautions” on Page 2.
If you hav e any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
The Lift Arm FSA/KSA-1004 is an accessory that can be
used with a broad range of Small Flat Panel Displays.
The FSA/KSA-1004 allows the user to move a display
vertically up or down in a 13 inch radius. The lift arm can
be moved v ertically 6-1/2” up from center and 6-1/2”
down from center.
The FSA/KSA-1004 is designed to safely hold a display
weighing up to 25 lbs. (11.3kg). The display can be up to
30 inches wide.
The FSA/KSA-1004 accommodates all VESA®
75mm/100mm compliant displays.
Lift Arm
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installation Instructions FSA/KSA-1004 2 CONTENTS PARTS.......................................................................3PARTS LIST ..............................................................3INSTALLATION..........................................................4 Removing the Display from t...
Installation Instructions FSA/KSA-1004 3 PARTS Figure 1. Lift Arm Installation Drawing PARTS LIST Table 1. Lift Arm Parts PART DESCRIPTION QTY 10 LIFT ARM 1 20 W ASHER , UHMW , .640 ID X .845 OD 2 30 W ASHER , UHMW PE , .318 ID X .031 OD 2 40 PIVOT PIN , SPF 1 50 CAPSCREW , BUTTON HEAD 2 60 LOCK NUT...
Installation Instructions FSA/KSA-1004 4 INSTALLATION Adding a lift arm modifies your mount configuration. Thisprocedure applies to most small flat panel displays,particularly those with a pivot or swing arm, whether wallmount or desk mount. Removing the Display from the Mount To remove the display ...
