Chief MSS6000 - Manuals - manualsarea.com

Page 2 - Installation Instructions; DISCLAIMER

MSS6000 Installation Instructions 2 DISCLAIMER Milestone AV Technologies, Inc., and its affiliated corporationsand subsidiaries (collectively, "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all deta...

Page 3 - LEGEND

Installation Instructions MSS6000 3 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allentare il f...

Page 4 - TOOLS REQUIRED FOR INSTALLATION

MSS6000 Installation Instructions 4 TOOLS REQUIRED FOR INSTALLATION PARTS #2 5/32"(Provided) 3/16"(Provided) 3/8" A (1) B (5).5x.5x.203 C (1)5/32" D (1)3/16"

Page 5 - INSTALLATION; Mount Installation

Installation Instructions MSS6000 5 INSTALLATION Mount Installation Free Standing (not anchored) Applications Only: NOTE: Do not perform this step if you are going to anchor the stand to a surface. 1. Install five rubber bumpers (B) on bottom of stand. (SeeFigure 1) Figure 1 Display 24 Inches High o...

Page 6 - Display Installation; If the display being mounted has a height of more; Display More Than 24 Inches High; on; Figure 5; Figure 6; Removing Display from Mount

MSS6000 Installation Instructions 6 Display Installation The following procedure assumes that the properinterface bracket for the display being mounted hasalready been installed on the display. If no interface bracket is present on display, installbracket to display using the instructions included w...

Page 7 - Figure 7; ADJUSTMENTS; Display Height Adjustment; Figure 8; Display Roll Adjustment

Installation Instructions MSS6000 7 Figure 7 ADJUSTMENTS Display Height Adjustment CAUTION: Displays are fragile. Allowing the display to drop to bottom of stand may result in damage to thedisplay. 1. While holding the display, loosen the four heightadjustment screws. (See Figure 8) CAUTION: Make su...

Page 8 - Figure 9; Display Swivel Tension Adjustment; Display Swivel Stop Location Adjustment; Display Swivel Tension

MSS6000 Installation Instructions 8 Figure 9 Display Swivel Tension Adjustment Display swivel tension is pre-set at the factory. Swiveltension will vary depending on the weight of display beingmounted. If swivel tension adjustment is required: 1. Disconnect all cords and cables from display. 2. Foll...

Page 9 - Cable Management; Option A

Installation Instructions MSS6000 9 Cable Management The MSS-6000 has been designed to provide multiplecable management/routing options. Option A Option A does not use the cable access features of theMSS-600 and simply routes the cables away from thedisplay and mount. (See Figure 12) Figure 12 Optio...

Page 10 - Europe; Asia Pacific

MSS6000 Installation Instructions 8800-000057 Rev. B 2008 Chief Manufacturing www.chiefmfg.com 03/08 USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 26686...