Chief MSP-DUK9000 - Manuals

Page 2 - IMPORTANT WARNINGS AND CAUTIONS!; CAUTION; TOOLS REQUIRED FOR INSTALLATION

Instruction Manual MSP-DUK9000 1 IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the cor- re...

Page 3 - Cable Wrap

2 Instruction Manual MSP-DUK9000 PARTS & DIMENSIONS Table 1: ITEM Nomenclature Qty ITEM Nomenclature Qty 10 Ceiling Column 1 160 Cable Tie 4 20 1/4”-20 Locking Nut 1 170 Cable Wrap 1 30 1/4”-20 x 1 1/2” Security Bolt 1 180 M3 X 12mm Button Head Security Screw 4 40 1” NPT Column 1 190 M4 X 12mm B...

Page 5 - INSPECT THE UNIT BEFORE INSTALLING; Read all instructions before starting installation.; PREPARE THE CEILING; • Standard fasteners secured to a wood framing member.; General Guidelines

4 Instruction Manual MSP-DUK9000 INSPECT THE UNIT BEFORE INSTALLING 1. Carefully inspect the Universal Ceiling Projector Mount for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with the installation until the carrier has reviewed the damage. NOTE: Rea...

Page 6 - WARNING: Improper installation can cause serious personal; Adjustable Column; Figure 3. Tighten Set Screw

Instruction Manual MSP-DUK9000 5 UNIVERSAL CEILING PROJECTOR MOUNT INSTALLATION PROCEDURES There are three common methods for installing the Universal Ceil-ing Projector Mount Series ceiling mount. The Universal Ceiling Projector Mount can be suspended from an adjustable column, stan-dard fasteners ...

Page 7 - Standard Fasteners Secured to a Wood Framing Member; Secure one end of the threaded rod to the structural member.

6 Instruction Manual MSP-DUK9000 Standard Fasteners Secured to a Wood Framing Member The Universal Ceiling Projector Mount can be secured to a wood framing member through four slotted holes in the Universal Ceiling Projector Mount using four 1/4” diameter lag screws or, if the area is accessible fro...

Page 8 - WARNING: You must use proper attaching hardware and

Instruction Manual MSP-DUK9000 7 PROJECTOR INTERFACE PLATEATTACHMENT PROCEDURES Attach the bottom portion of the universal projector mount to the projector as follows. 1. Loosen, but do not remove, acorn nuts securing arms of the universal projector mount (see Figure 5). 2. Adjust front and back leg...

Page 10 - SECURITY INSTALLATION; Figure 8. Adding Optional Security

Instruction Manual MSP-DUK9000 9 SECURITY INSTALLATION (OPTIONAL) 1. Using security wrench (provided), remove 5/16” standard set-screw and replace using 5/16” security screw (see Figure 8). 2. Remove two screws from bottom of Projector Interface Plate, preferably one from each corner. 3. Using secur...

Page 11 - PROJECTOR ALIGMNMENT INSTRUCTIONS; Pitch; WARNING: Do not turn the Universal Ceiling Projector Mount

10 Instruction Manual MSP-DUK9000 PROJECTOR ALIGMNMENT INSTRUCTIONS The Universal Ceiling Projector Mount can be adjusted for vertical elevation (pitch), horizontal tilt (roll), and rotation (yaw). Once the desired position is located and all the screws of the Universal Ceil-ing Projector Mount are ...