Page 2 - IMPORTANT WARNINGS AND CAUTIONS!; CAUTION; sponding instructions.; TOOLS REQUIRED FOR INSTALLATION; Socket set with extension; CONTENTS
Instruction Manual TPP 1 IMPORTANT WARNINGS AND CAUTIONS! • WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. • CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- spon...
Page 3 - PARTS
2 Instruction Manual TPP (1) PLATE, back (1) SCREW, pan head, 10-24 (1) PLATE, assembly, pitch-adjustable (4) SCREW, cap, hex head, 5/16-18 X 1/2” (1) PLATE, face (2) NUT, Stover locknut, 3/8-16 (1) FLAG, latching (1) SPACER, Nylon, .38 X .194 X .032” (1) NUT, Nylock, 10-24 (2) WASHER, flat, 3/8” (3...
Page 4 - TPP INSTALLATION; Assembly; WARNING: It is the responsibility of the installer to verify that
Instruction Manual TPP 3 INSPECT THE MOUNT BEFORE INSTALLING IMPORTANT: Before installing the mount, make sure it has not been damaged during shipping. 1. Carefully inspect the mount for shipping damage. If any dam-age is apparent, call your carrier claims agent and do not con-tinue with the install...
Page 5 - Figure 4. Vertical Tilt Shown without Back Plate for Clarity
4 Instruction Manual TPP 6. Install the face plate in the desired position (see Figure 4, Fig-ure 5, Figure 6 and Figure 7) on the pitch-adjustable plate and secure using two 3/8-16 Nylock nuts and washers in any matching set of radial holes slotted to allow slight roll adjust-ment. Figure 4. Vertic...
Page 6 - Mount the Display; WARNING: Make sure the flag securing the display is com-; If the flag; WARNING: Watch for pinch points. Do not put your fingers
Instruction Manual TPP 5 Mount the Display 1. Attach included PSB brackets to your display using the instruc-tions included with the PSB package. 2. Make sure no power is supplied to the display and the flag is in the down position before attempting to mount the display. 3. Using two people, slide t...
Page 7 - Remove the Display; Using two people, slide the display up and out of the TPP.
6 Instruction Manual TPP Remove the Display WARNING: Make sure the flag securing the display is com- pletely raised at all times except when removing or installing the display. The flag must be all the way up when installing/removing cables. WARNING: Watch for pinch points. Do not put your fingers b...