Chief PNR - Manual
Chief PNR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – IMPORTANT WARNINGS AND CAUTIONS!; corresponding instructions.; CONTENTS
- Page 3 – DIMENSIONAL DRAWING
- Page 4 – Inspect The Unit Before Installing; INTERFACES; PARTS LIST; Table 2: PNR Interfaces
- Page 5 – INSTALLATION; Figure 1; Install the Mount; Mounting the top bracket
- Page 6 – Figure 2; Adjust Height on the PNR; Height adjustment range up to 1.08 inches.; Install Cover Plates and End Caps; The cover plates and end caps have pressure; Figure 4; Adjustment Nut
- Page 7 – Mount the Display; Watch for pinch points. Do not put your; Figure 6; Holes are provided in the faceplate for use with a; Figure 7; CABLE MANAGEMENT; Make sure your cables do not run through
- Page 8 – Figure 8; ADJUSTMENTS; TENSION ADJUSTMENTS; Lateral Tilt Tension Adjustment; Overtightening lateral adjustment will; Rotational Tilt Tension Adjustment; Management Channel
- Page 9 – Swing Arm Adjustments; Adjusting the Swing Arms Off Center
- Page 10 – Swing Arm Tension Adjustment
- Page 11 – Removing Display from Mount; Increase
I N S T A L L A T I O N I N S T R U C T I O N S
C hief Manuf act uring, a divis ion of Milestone AV T echnologi es
8401 Eagle C reek Parkw ay, Sav age, M N 55378
P: 800.582.6480 / 9 52.894. 6280 F: 877. 894.6 918 / 952.894.6918
Large Flat Panel Dual Arm Wall Mount
Model PNR™
The PNR is wall-mounted, rugged, versatile, and
installer-friendly. The PNR is compatible with the
standard (14” x 14”) PSB interface bracket in which a
display can be mounted in either the landscape or
portrait position on the PNR.
The dual arms on the PNR:
Extend from the wall 25” in length
Pivot up to 90º left or right of center
The standard PNR is shipped with the support posts for
the dual arms centered in the mount. The support posts
can be moved laterally right or left of center to readily
accommodate sites with limited wall space. The mount
also has over an inch of height adjustment. The tilt range
for the display is 5º up and 15º down.
The PNR was designed for fast installation. After drawing
the plumb line and installing the two top lag bolts into the
dual wall studs, the installer hangs the PNR on its top
bracket and installs two lag bolts in the bottom bracket.
Next, the installer makes the height adjustment, mounts
the display, and connects the power/audio/video cables,
which are diverted into the built-in path in the swing-out
arms. After making the lateral, rotational, and tilt
adjustments, the installation process is complete.
BEFORE YOU BEGIN
CAUTION:
To prevent damage to the PNR, which could affect or void the Factory warranty, and to the equipment that
will be attached to it, thoroughly study all instructions and illustrations before you begin the installation. Pay particular
attention to the “Important Warnings and Cautions” on Page 2.
•
The combined weight of the components installed on the PNR must not exceed 200 lbs. (90.72kg).
•
The PNR wall mount must be installed on dual wall studs or supporting framework. The wall to which the PNR is
anchored must be capable of supporting
five times
the total weight of the mount and all attached equipment.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
8831-000007 Rev I
©2008 Milestone Technologies
11/08
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model PNR™ Installation Instructions 2 IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the c...
Installation Instructions Model PNR™ 3 DIMENSIONAL DRAWING
Model PNR™ Installation Instructions 4 Inspect The Unit Before Installing WARNING: Watch for pinch points. Do not put your fingers between movable parts. 1. Carefully inspect the PNR for shipping damage. If anydamage is apparent, call your carrier claims agentand do not continue with the installatio...
