CDA CI931 - Manual
CDA CI931 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Contents
- Page 3 – Important; Appliance information:; Appliance Model; CE Declarations of Conformity:
- Page 5 – Remove the screws holding the plastic covers to the back of the; Do not throw the transit bolts away. If you need to move the washing
- Page 7 – Levelling; To reduce the noise level from the washing machine and to prevent; Electrical Connection; Check the rating plate located on the porthole door of the washing
- Page 8 – Electrical information; follow the steps below:; How to connect an alternative plug; supply cable, the appliance may require removing for servicing.
- Page 9 – Before First Use; any wash programmes are run (see the operating instructions on the
- Page 10 – Sort the clothes according to fabric and how they are made:
- Page 11 – Detergents and Additives; Liquid detergents may also be used in this washing machine.; The level of liquid must never be higher than the MAX mark printed; The amount of clothes to be washed.; We recommend the use of a decalcifying product if the water; Eco Note
- Page 13 – Washing Machine Programmes; There are five types of programme:
- Page 16 – Spin Speed Selection and Anti-Crease; Spin speed
- Page 17 – Delay Timer
- Page 18 – Lock function selection
- Page 20 – Pull outwards on the detergent dispenser to remove it completely; The washing machine should be disconnected from the mains
- Page 21 – Cleaning the Filter; Clean the accessible filter if the drain pump is blocked by any; To avoid risk of scalding, do not carry out this operation when the; Cleaning the Outside of the Washing Machine; or; Wipe any detergent spills immediately to minimise the risk of
- Page 22 – Why won’t the washing machine start?
- Page 23 – Problems; Why doesn’t the washing machine drain or spin-dry?; If this failure is detected, F02 will appear on the display.; Why doesn’t the washing machine spin-dry?; This may be due to the following:; Why can’t I see any water in the drum during the wash?; the; Other indications
*\Z[VTLY*HYL+LWHY[TLU[;OL.YV\W3[K/HYI`9VHK3HUNHY5V[[PUNOHTZOPYL5. /@
;
: 01949 862 012
F
: 01949 862 003
E
W
: www.cda.eu
CI931 Integrated Washing Machine
Manual for Installation, Use and Maintenance
allat
or Inst
Manual ffo
e
at
egrra
1 Int
CI93
enanc
tion, Use and Maint
hine
ashing Mac
ed W
Wa
e
c
e
: 0194
;
L+LWHY[TLU[
*\Z[VTLY*HY
: service@
E
: 01949 862 003
F
49 862 012
V\W3[K/HYI`9VHK
;OL.Y
.cda.eu
: www
W
@cda.eu
L5.
K3HUNHY5V[[PUNOHTZOPY
/@
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Contents Page 1 Important information Page 2 Warnings Page 3 Washing machine specifications Page 4 Unpacking the washing machine and removing the transit bolts Page 5 Connecting to the mains water supply Page 6-7 Levelling and electrical information Page 8 Before first use Page 9 Preparing garments fo...
Important This appliance must only be used for the purpose for which it is intended, i.e. domestic use. Any other use could be dangerous and may lead to premature failure of the appliance. The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of ...
Unpacking the Washing Machine s Remove the base, corner protectors and top cover (Figure 1). Removing the Transit Bolts s Remove the screws holding the plastic covers to the back of the washing machine (Figure 2 and 3). s Loosen and remove the 3 transit bolts (Figure 3). s Cover the holes with the p...
