Page 2 - Important; Appliance information:; Appliance Model; CE Declarations of Conformity:
Important The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. This appli...
Page 3 - Do not allow children to play with or near the appliance.; Before first use
Important Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance. This is a household appliance, which is produced in accordance with the national standard. It is intended for food storage only, not for storage of blood, medicine and biological products. To...
Page 4 - Use; Fridge
Use Fridge • Never put liquids in the refrigerator uncovered. • Never put hot foods in the refrigerator. Warm food should be allowed to cool to room temperature before being put into the refrigerator. • Nothing should rest against the rear wall of the refrigerator, as this will cause frost and possi...
Page 5 - Care and cleaning; Once cleaning is complete, then reconnect the power.; Defrosting the fridge; Disconnect the appliance from the power.
Care and cleaning Always disconnect the appliance from the power supply before any cleaning or maintenance. The fridge sections should be cleaned using a solution of bicarbonate of soda and lukewarm water. Do not use abrasive products or detergents. After washing, rinse and dry thoroughly. Clean the...
Page 6 - Troubleshooting; If the appliance is not working
Troubleshooting If you have any problems with your appliance, you should check the troubleshooting prior to calling CDA Customer Care to prevent unnecessary service calls and potential cost. If the appliance is not working • Check there is power to the appliance: • The house fuses are intact and the...
Page 7 - Installation; Installation kit contents; Decor door fixing bracket; Tools required; Flathead screwdriver
KIT 9 10 fig. 2 fig. 3 1 2 3 4 5 6 7 8 9 10 Installation This appliance must never be installed close to heat sources i.e. heating elements, radiators, cookers or in damp places. The appliance should be mounted on a piece of wood (for example a section of worktop or kitchen carcass) if a raised floo...
Page 9 - Screw the hinges and metal bracket to the kitchen unit using
9 fig. 9 Installation Fig. 7 - Adjusting the appliance height The height of the appliance can be adjusted by the help of adjustable feet to fit the furniture height. Use a spirit level to ensure the appliance is level. Fig. 8 - Aligning the appliance Slide the appliance into the kitchen unit and ali...
Page 10 - Fitting the decor door bracket
fig. 12 Installation Fig. 10 - Fitting the decor door bracket Unscrew and remove the nuts and washers from the appliance door. Place fixing bracket on the appliance door by inserting the holes to adjustment bolts.Dimension B= Measure from the underside surface of kitchen unit to the bottom of fixing...
Page 11 - Fig. 14 - Fitting the decor door base fixings; Fit the decorative cover (4) on the decor door fixing bracket.
fig. 15 Installation Fig. 13 - Aligning the decor door Close the door and check the alignment with the other unit doors. Adjust the decor door by screwing or unscrewing the adjustment bolts for vertical adjustment and by the help of the slots on the fixing bracket for other directions. Lock the scre...
Page 13 - Reversing the door; Do not turn the door upside down
Reversing the door It is possible to reverse the door on this appliance, if required. To do so, follow the steps below: 1. Open the door. 2. Loosen the hinge fixing screws (1) and remove the door. 3. Remove the door fixing screws (2). 4. Remove the cover caps (3). 5. Relocate the hinges as shown. 6....
Page 14 - Electrical information; How to connect an alternative plug; by the Earth symbol or coloured GREEN and YELLOW.
Electrical information Warning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. Remove the fuse cover and fuse. 2. Fit replacement 13A fuse, ASTA approved to BS 1362 ...
Page 16 - Passionate about style; To contact our Customer Care Department, or for Service,
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu Passionate about style To contact our Customer Care Department, or for Service, please contact us on the details below. FW222 Fridge Free...