CDA SC210 - Manual

5 6Q5.. SV150.. SV100.. Control Panels Controls Description 1. Oven thermostat knob 2. Oven switch knob3. Clock and timer with “Touch-Control” keys Warning Lights:4. Power on indicator lamp 5. Oven thermostat indicator light Please Note: This appliance incorporates a safety cooling fan which you wil...

7 Fan Oven General Features The heating and cooking in electrical hot air ovens take place by forced convection. The two elements which make this process take place are: – Grill element 2000 W – Circular element 2200 W Note:Upon first use, it is advisable to operate the oven at the maximum temperatu...

8 Plurifunction Oven General Features This is an oven that presents particular features from an operational point of view. In fact, it is possible to insert 4 different programs to satisfy every cooking need. The 4 positions, thermostatically controlled, are obtained by 3 heating elements which are:...

9 Multifunction Oven General Features As its name indicates, this is an oven that presents particular features from an operational point of view. In fact, it is possible to insert 7 different programmes to satisfy every cooking need.The 7 positions, thermostatically controlled, are obtained by 4 hea...

10 Ov en functions 6Q5.. SV1 50.. SV1 00.. SC6 10.. SC5 10.. SC220.. SC2 10.. ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ # ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ (#) function with thermostat knob set “ ” (OFF). How to Use the Oven WARNING:The door is hot, use the handle. ATTENTION - MOST IMPORTANTPa...

12 Defrosting Frozen Foods Only the oven fan comes on. Use with the thermostat knob set to “ ” - other positions have no effect. The food is thawed by ventilation without heating. SC 510.. model: Set the function selector knob to . With the thermostat knob in the off “ ” position only the oven fan i...

14 Cooking Advice Note:Depending on your model, your oven may only have some of these functions (see table at page no. 10). Sterilization Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the following way:a. Set the switch to position or . b. Set the thermosta...

16 Clock and Timer with “Touch-Control” Keys K eys and Touched simultaneously (for more than 2 seconds): – setting the clock; – setting the timer volume (by touching once, along with the “ ” key); – to cancel automatic cooking at any time. Function selection (touched for more than 2 seconds): – sett...

17 “Touch-Control” Keys The “touch-control” keys shall be operated by the fingers (just by touching the key). When using touch controls it is best to use the ball of your finger rather than the tip.The keys are automatically deactivated:– 8 seconds after the last selection; the deactivation is indic...

18 Automatic Cooking Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off.1. Check the clock shows the correct time.2. Select the function and temperature (function and temperature knobs). The oven will come on.3. Decide how long the food will take to cook, allow...

19 Electronic Programmer The electronic programmer is a device that groups together the following functions:– 24 hour clock with illuminated display– Timer (up to 23 hours and 59 minutes) – Programme for automatic oven cooking– Programme for semi-automatic oven cooking. A U T O Description of the Bu...

20 Electronic Clock (fig. 8) The programmer is equipped with an electronic clock with illuminated numbers which indicates hours and minutes. Upon immediate connection of the oven or after a power cut, three zeros will flash on the programmer display. To set the correct time of day it is necessary to...

21 A U T O A U T O Automatic Oven Cooking To cook food automatically in the oven, it is necessary to:1. Set the length of the cooking time 2. Set the end of the cooking time 3. Set the temperature and the oven cooking program. These operations are done in the following way: 1. Set the length of the ...

22 Semi - Automatic Cooking This is used to switch the oven off automatically after the desired cooking time has elapsed. There are two ways to set the semi-automatic cooking function: 1. Set the length of time you need to cook the food by pushing the button and the button to advance, or to go backw...

24 Care and Maintenance It is advisable to clean when the appliance is cold and especially for cleaning the enamelled parts. Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces. Avoid using cleaning products with a chlorine or acidic base. WARNINGWhen correctly i...

25 Stainless Steel, Aluminium, Painted Parts and Silk-screen Printed Surfaces Clean using an appropriate product. Always dry thoroughly.Stainless steel surfaces: can be cleaned with an appropriate stainless steel cleaner.IMPORTANT: these parts must be cleaned very carefully to avoid scratching and a...

26 Replacing the Oven Light WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.– Let the oven cavity and the heating elements to cool down;– Switch off the electrical supply;– Unscrew the protective cover C (fig. 15);– Unscrew and repla...

27 Replacing the Halogen Oven Light WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.– Let the oven cavity and the heating elements to cool down;– Switch off the electrical supply; Top Right Lamp:– Remove the protective cover C (fig. ...

28 Assembling and Dismantling of the Side Runner Frames – Assemble the wire racks to the oven walls using the 2 screws (Fig. 17).– Slide the tray and rack into the runners (Fig. 18). The rack must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven. – To dism...

29 Drop-down Grill Element – To lower the grill element: use a flat-head screwdriver or a small coin to loosen the element fixing screw. – When you have finished cleaning the oven ceiling, raise the grill element and screw the element fixing screw back onto the stud. – Make sure that the fixing scre...

30 Telescopic Sliding Shelf Supports The telescopic sliding shelf supports make it safer and easier to insert and remove the oven shelves and trays. They stop when they are pulled out to the maximum position.Important! When fitting the sliding shelf supports, make sure that you fit:– The slides to t...

31 1 2 1 To remove the telescopic sliding shelf supports:– Remove the side racks by unscrewing the fixing screws (Fig. 22).– Lay down the telescopic sliding shelf support and side racks, with the telescopic sliding shelf support underneath. – Find the safety locks. These are the tabs that clip over ...

32 Oven Door Removing the Oven Door The oven door can easily be removed as follows:– Open the door to the full extent (fig. 24a).– Open the lever A completely on the left and right hinges (fig. 24b). – Hold the door as shown in fig. 24.– Gently close the door (fig. 24c) until left and right hinge le...

33 Oven Door - Removable Inner Pane of Glass Cleaning the Panes of Glass The oven door is fitted with no. 2 panes: - no. 1 outside;- no. 1 inner;To clean the panes on both sides it is necessary to remove the inner pane as follows. Do not use harsh abrasive cleaners or sharp metal scrapers to clean t...

34 Replacing the Inner Pane of Glass 1. Make sure the door is locked open (see fig. 27). 2. Replace the inner pane: – Check that the four rubber pads are in place (D in Fig. 30).– Models SV100.. and SV150.. only: Check that you are holding the pane the correct way. You should be able to read the wor...

37 Replacing the Middle and Inner Panes of Glass 1. Make sure the door is locked open (see fig. 38). 2. Replace the middle pane: – Check that the four rubber pads are in place (M in fig. 44).– Check that you are holding the pane the correct way. You should be able to read the wording on it as it fac...

39 ADVICE FOR THE INSTALLER Important Appliance installation and maintenance must only be carried out by QUALIFIED TECHNICIANS and in compliance with the local safety standards. • Failure to observe this rule will invalidate the warranty. • Always disconnect the appliance from the electrical supply ...

42 Fixing the Oven Introduce the oven into the furniture opening and fix it with screws (not supplied) as figure 57. It is essential that the oven rests on a surface which will support its weight, as the screw fixing is only complementary. NoteIt is essential that when installing your oven adequate ...

44 Electrical Installation For your safety please read the following information: WARNING! Before effecting any intervention on the electrical parts the appliance must be disconnected from the network.IMPORTANT: The oven must be installed in accordance with the manufacturer’s instructions. Incorrect...

46 Appliance Servicing CDA provide a quality and effective after-sales service to cover all your servicing needs. Please attach your receipt to this page for safekeeping.Please help us to help you by having the following information available when booking a service-call:1. Model type, make and model...

47 Guarantee CDA appliances carry a five-year parts and a one-year labour guarantee. CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be free of both labour and parts charges. After the first year and within five years, the...

Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : [email protected] W : www.cda.eu To contact our Customer Care Department, or for Service, please contact us on the details below. Cod. 1103528 - ß2